A few simple steps to ensure perfect water, every time.
Use and Care Guide MODELS: A9CTELECTRICSS • A9ELECTRICBLK • A9ELECTRICWHT Registration Please visit the website below to register your new water cooler within the first 30 days of purchase. Registration within the first 30 days will activate your one year warranty. www.avalonh2o.com/register-my-avalon-cooler Please keep your model number, order number and purchase date for future support. You can reach us at 1-800-256-0695.
Contents About Your Water Cooler Meet Your Avalon Product 1-2 Part Names 3-4 Control Panel 5-6 Tech Specs 7 Working Principle 8 Filter Function Introduction 9 Getting Started Unpacking Installation (Under the Sink) Installation (Refrigerator Water Line) Flushing Filters Finishing Water Cooler Installation Installing and Removing the Drip Tray 11 12-13 14 15-16 17-20 21 User Guide and Maintenance Replacing the Filters Leak Detection 23-25 26 Troubleshooting 28-29 Safety 31-32
About Your Water Cooler Meet Your Avalon Product Inside the box, you’ll find: Valve and Tube Assembly Filter Flushing Adapter Carbon Block Filter Sediment Filter with Filter Adapter Small PE Tubing Mounting Bracket PE Tubing (20') Three Way Plastic Adapter Metal Adapter with Valve 1
About Your Water Cooler Meet Your Avalon Product 2 Attractive Design Custom Temperature Perfect Pour Dual Stage Filtration Worry-Free Cleaning Modern countertop design with electric touch controls Piping hot, room temperature, or crisp cold water Quantitative water volume options Double the filtration for twice the peace of mind Self-cleaning UV function for longer lasting water purification NSF Certified Filters UL Listed Energy Star Approved Child Safety Feature Built-in Nightlight We me
About Your Water Cooler Part Names 1. Display Panel 2. Top Cover 4. Water Spout 5. Night Light 3. Drip Tray Front 8. Cooling Switch 6. Fan 9. Heating Switch 7. Dust Filter 10.
About Your Water Cooler Part Names 11. Cold Water Drain 12. Hot Water Drain Bottom 13. Sediment Filter 14.
About Your Water Cooler Control Panel After powering on, the default temperature will be room temperature and that icon will light up. After 5 seconds of no use, the temperature will go back to room temperature. Hot Water Button Touch to illuminate, then touch and hold the dispense button for a continuous flow of water. When dispensing hot water, the automatic continuous flow and cup sizes are disabled for safety purposes.
About Your Water Cooler Control Panel UV Indicator This light is on when dispensing cold or room temperature water for added purification. Dispense Button Touch this button to dispense water. Press again to stop dispensing. This button will continuously dispense water unless a cup size is chosen. Nightlight Button Touch this button and the icon and light in the dispensing area will light up. After selecting your temperature, select your desired water volume option.
About Your Water Cooler Tech Specs Model A9CTELECTRICSS, A9ELECTRICBLK, A9ELECTRICWHT Hot/Cold/Room Temp Output 1.2L/min / 1.2L/min / 1.2 L/min Hot Water Capacity 4 L/H ( ≥ 185°F) Hot Tank Volume 0.8 Liters Cold Water Capacity 3 L/H ( ≤ 185°F) Cold Tank Volume 1.2 Liters Applicable Water Pressure 0.1-0.4 MPa Applicable Water Tap Water Stage 1 Filtration Sediment Filter Stage 2 Filtration Carbon Block Filter Product Size 16”(L)x10”(W)x15.75”(H) Packing Size 21.
About Your Water Cooler Working Principle Solenoid Valve Reducing Valve Flowchart of water generation: UV Lamp Cold Water Tank Solenoid Valve Ambient and Cold Water Outlet Hot Water Outlet PP Solenoid Valve C Solenoid Valve Hot Water Tank Water Inlet Cooling NTC Drain Water Heating NTC E N L Solenoid Valve 1 Display Board 220V IN Compressor Circuit Diagram: Fuse Leakage Detection Board Power Board M UV Lamp { Solenoid Valves 2-5 Cooling Switch bimetal 1 Heating Switch Heater 8
About Your Water Cooler Filter Function Introduction Stage Filter Function Stage 1 Sediment Filter Course filtration of raw water to remove rust, dirt and sediment Stage 2 Carbon Block Filter Removes the water odor, residual chlorine, organic matter, and lead to improve taste 9
Getting Started 10
Getting Started Unpacking Your Avalon Water Cooler Locating Dispenser • Do NOT plug in the power cord yet. • Place dispenser upright on a hard and level surface in a cool and shaded location near a grounded wall outlet. Position the dispenser so there is about 4 inches of clearance from the wall on the back and both sides. Locating Accessories • Open the top of the packaging and remove the top foam piece along with accessories and place them aside.
Getting Started Installation (Under the Sink) Installing the Metal Adapter with Valve 1. Turn off the current cold water supply that is the source of water to your sink. 3. Connect the Metal Adapter with Valve between the cold water supply line and cold water valve. 12 2. Disconnect the current cold water supply line under your sink.
Getting Started Installation (Under the Sink) Installing the Metal Adapter with Valve 4. Remove the nut from the Metal Adapter and insert the PE Tubing through the nut. Slide the PE Tubing onto the protruding part of the Adapter where the nut was located until it reaches the threading. 5. Screw the nut tightly into place to keep the PE Tubing securely connected to the Metal Adapter with Valve. Make sure the Valve is in the off position (perpendicular to the PE Tubing).
Getting Started Installation (Refrigerator Water Line) Installing the Three Way Plastic Adapter 1. Turn off the current cold water supply that is the source of water to your refrigerator line. 2. Cut the current ¼” tubing that is connected to the back of your refrigerator or ice maker near the end of it that is currently inserted into the refrigerator. 3. Insert each cut end of the existing ¼” tubing into one of the holes of the Three Way Plastic Adapter. 4.
Getting Started Flushing Filters Prior to Use Before continuing with installation, it is recommended that you flush both filters for approximately 2 minutes. 1. Disconnect the Sediment Filter from its Adapter by rotating it counter clockwise and twist the filter into the provided Filter Flushing Adapter by rotating it clockwise. 2.
Getting Started Flushing Filters Prior to Use 5. Remove the Carbon Block Filter from the side cabinet by rotating it counter clockwise and follow the same steps. Once complete you can put the Carbon Block Filter back into the side cabinet. 16 6. Remove the end of the PE Tubing from the Filter Flushing Adapter by pressing in on the push connect ring and pulling out the PE Tubing.
Getting Started Finishing the Water Cooler Installation Once you have flushed the filters and removed the filters and PE Tubing from the Filter Flushing Adaptor, you are ready to complete the installation process. 1. Clip the black Mounting Bracket onto the top of the back of the unit by inserting the longer pegs upward into the 2 slots, and then click the shorter pegs into place in the slots. 2. Twist the Sediment Filter into the Filter Adapter by rotating it clockwise.
Getting Started Finishing the Water Cooler Installation 3. Locate the Valve and Tube Assembly. Connect the tube end of this assembly to the left insert on the Filter Adapter. Connect the longer PE Tubing, that is connected to the water source, to the valve end of this assembly. 18 4. Remove the plug from the water inlet (#10) located on the back of the unit. To do this press on the push connect ring that is behind the plug.
Getting Started Finishing the Water Cooler Installation 5. Push one end of the small PE Tubing into the water inlet (#10). Push the other end of the Small PE Tubing into the right insert on the Filter Adapter. Make sure the small PE Tubing it tight and secure. 6. Turn the Valve for the water source back on (the on position is parallel to the PE Tubing). 7. Turn on the Valve that is located to the left of the filter (the on position is parallel to the PE Tubing).
Getting Started Finishing the Water Cooler Installation Be sure to dispense a little water from both the hot and cold buttons prior to flipping on the heating (#9) and cooling (#8) switches located on the back of the machine. 8. Once the heating switch (#9) is turned on (I), it will take 15-20 minutes for the water to reach it's desired hot temperature. 20 9. Once the cooling switch (#8) is turned on (I), it will take up to 1 hour to reach the desired cold temperature.
Getting Started Installing and Removing the Drip Tray No external drain needed, the overflow will collect here. The red float will rise to indicate when the drip tray needs to be emptied. 1. To install the drip tray, simply slide it into the area below the spouts until it snaps into place. 2. To remove the drip tray, place your fingers in the grid of the drip tray and with one hand gently pull the drip tray toward you to release it.
User Guide and Maintenance 22
User Guide and Maintenance Replacing the Filters 1. When lifetime of the filter is near its end, either by means of water flow or after 6 months time, the filter indicator will blink as a warning. When the filter lifetime is up, the filter indicator will continue to blink and the machine will beep to let you know that the filter needs to be changed. 2. Shut off the Valve located at the connection to the water source or the Valve located to the left of the Sediment Filter on the back of the unit.
User Guide and Maintenance Replacing the Filters 3. Twist the expired filters to remove them from the Filter Adapter at the back of the unit and inside the side cabinet. Insert the new filters into the Filter Adapters by twisting them into place and rotating them clockwise. Make sure the Sediment Filter is on the back of the unit, and the Carbon Block Filter is in the side cabinet. 24 4. Turn on the Valve that was previously shut off.
User Guide and Maintenance Replacing the Filters 5. After replacing the filters, press and hold the nightlight button for 5 seconds. Press and hold this button until the filter indicator stops blinking. 6. In order to flush the new filters, allow the water to flow from the water spout (#4) for approximately 2 minutes.
User Guide and Maintenance Leak Detection Our machines are equipped with a high-tech leak detector that will alert you of any potential leak. At the same time the machine will automatically shut off any intake of water to prevent a potential flood. In the event of a possible leak, the dispense button on the front panel will blink while the machine makes a beeping sound. Please check around the machine for any leaking water and determine the source of it.
Troubleshooting 27
Troubleshooting Troubleshooting If you are having trouble with your water cooler please see the following solutions. You can also view our trouble shooting videos at the website below. Please feel free to contact us with any questions. 1-800-256-0695 support@avalonh2o.com www.avalonh2o.
Troubleshooting Troubleshooting Dispense button is flashing and unit is beeping If the dispense button is flashing and the unit is making a slight beeping sound, it is alerting you that there may be a leak in the unit. Please refer to page 26. Water leaking from unit • Check to make sure that pipes are connected properly. • Inspect the adapter to ensure that it is connected properly. • Water pipe may need to be replaced.
Safety 30
Safety Safety To reduce risk of injury and property damage, user must read this entire guide before assembling, installing and operating the dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. This product dispenses water at very high temperatures. Failure to use this properly can cause personal injury.
Safety Safety • • • • • • • • • • • • 32 Ensure dispenser is unplugged prior to cleaning. Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use by children. Service should be performed only by a certified technician. Warning: Do not damage the refrigerant circuit.