Service manual

Trim Parts
5–10 40H Series Service Manual
STRIKE PACKAGES
How to order To order strike packages, use the nomenclature shown in the example
below.
The table below lists available door thicknesses (assuming the mortise
case is centered in the door) and indicates the lip to center dimension
of the corresponding strike.
40HST – 1 – 626 –
Series:
40HST – Strike package
Kit number:
1 – Universal strike (non-handed)
4 – Strike box only
5 – Magnetic strike box only
Finish:
605 606 611
612 613 618
619 625 626
629 630 690
Options:
SH – Security head screws
Thick door – Specify thickness if other than 1 3/4″
1
7/8-LTC – Flat-lipped strike
1.
For door thickness information, see the table below.
Door
thickness
Lip to center
dimension Nomenclature example
2 1/4″ 1.424″ 40HST – 1 – 626 – – 2 1/4
2 1/2″ 1.549″ 40HST – 1 – 626 – – 2 1/2
2 3/4″ 1.674″ 40HST – 1 – 626 – – 2 3/4
3″ 1.799″ 40HST – 1 – 626 – – 3
3 1/4″ 1.924″ 40HST – 1 – 626 – – 3 1/4
3 1/2″ 2.049″ 40HST – 1 – 626 – – 3 1/2
3 3/4″ 2.174″ 40HST – 1 – 626 – – 3 3/4
4″ 2.299″ 40HST – 1 – 626 – – 4
4 1/4″ 2.424″ 40HST – 1 – 626 – – 4 1/4
4 1/2″ 2.549″ 40HST – 1 – 626 – – 4 1/2
4 3/4″ 2.674″ 40HST – 1 – 626 – – 4 3/4
5″ 2.799″ 40HST – 1 – 626 – – 5
Figure 5.10 Lip to center dimension
x
Lip to center dimension—
taken from the edge of the lip to
the center of the screw holes