Service manual

Installation Instructions for 45H & 47H Mortise Locks
BEST ACCESS SYSTEMS
a Division of Stanley Security Solutions, Inc.
7
Installation Instructions for 45H & 47H Mortise Locks
Installing the trim
For M trim (Figure 11c) or
N trim (Figure 11d)
1 Position the inside and outside
escutcheons on the door so they
are centered on the trim mounting
plates.
2 Install the upper and lower
escutcheon screws from the inside
of the door.
3 Use the spanner wrench (KD316)
to install the trim rings onto the
inside and outside trim mounting
plates.
Figure 11c Installing the M trim escutcheon
s
(47H M trim shown)
Escutcheon
screw
Inside
escutcheon
Trim ring
Figure 11d Installing the N trim escutcheons
Escutcheon
screw
Inside
escutcheon
Trim ring