Service manual

Installation Instructions for 45HW & 47HW Electrified Mortise Locks

BEST ACCESS SYSTEMS

a Division of Stanley Security Solutions, Inc.

Installation Instructions for 45HW & 47HW Electrified Mortise Locks

Finishing the installation

18 Install inside and outside levers

For standard lever installation (Figure 18)

1 Unscrew the inside spindle one full turn to allow the

spindles to turn freely.

Note: Remove the label from the inside spindle.

2 With the handle pointing toward the door hinges,

insert the outside lever and spindle assembly into the

lock from the outside of the door.

Note: The 17 style lever is handed. The lever should

curve downward when installed on the door.

3 Slide the inside lever onto the inside spindle and

secure it with the set screw.

4 Turn the levers to check that they operate smoothly.

19 Install mortise case faceplate

1 Secure the mortise case faceplate to the mortise case

with the faceplate mounting screws.

2 Check the lock for proper operation.

Figure 18 Installing the levers

Location

of set

screw

Outside of door

Inside of door

Spindle

assembly

Figure 19 Installing the mortise case faceplate