Owner`s manual

6 Specifications

Travis Industries 100-01136 4040809

Installation Options:

• Freestanding Stove

• Residential or Mobile Home

• Horizontal or Vertical Vent

Features:

• Ember Fyre ™ Burner for "Wood Fire" Look

• Works During Power Outages

• Optional Thermostat or Remote Control

• Variable-Rate Heat Output

• Blower Standard

Heating Specifications:

Approximate Heating Capacity (in square feet)*......1,200 to 2,000

Maximum BTU Input Per Hour...............................43,000 (NG & LP)

Minimum BTU Output on Low (with blowers on) .....23,384 (NG) 20,800 (LP)

Steady State Efficiency........................................up to 78% (NG), 81% (LP)

AFUE..................................................................71% (NG), 73.7% (LP)

* Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside

temperature.

** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent

of installed system. To measure the net BTU’s, multiply the BTU input by the efficiency percentage.

Dimensions:

Fuel:

This heater is shipped in

natural gas (NG)

configuration but may be

converted to propane (LP)

using the included LP

conversion kit. The sticker

on top of the gas control

valve will verify the correct

fuel.

Weight: 240 Lbs

Measure

Clearances

from the

Stove Top

The starter section is 1/4"

above the top.

28"

33"

21-1/2"

Electrical Specifications

Electrical Rating.........................................................115 Volts, 0.8 Amps, 60 Hz (92 watts on high)