Quick Reference Guide

REN-CBW & EBC-05B1
28 REN-CBW & EBC-05B1 Quick Reference Guide
3.3 Installing REN-CBW Gateway
Step 1. Device included 1 x REN-CB, 1 x USB adapter and 1 x Micro USB to USB cable.
Step 2. Before installation, rotate counterclockwise the REN-CB cover to remove it.
Step 3. Each REN-CB has a code number, located in the body back shell.
Step 4. Channels for cable ties design allow ceiling/wall/adhesive tape installation.
Step 5. Rotate clockwise to attach the unit and plug in USB power cable; the unit will
startup automatically.
Adhesive Tape Note:
1. Clean the surface area before use.
2. This adhesive tape can be fixed or mount on the object.
3. This adhesive tape is reusable with wipe of water.