APC-18W9 18" WXGA TFT Fanless Plastic Multi-Touch Full Flat Panel PC with J1900 Quick Reference Guide 1st Ed – 09 January 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
APC-18W9 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Content 1. Getting Started ........................................................................................................ 4 1.1 1.2 1.3 1.4 Safety Precautions .................................................................................................... 4 Packing List ............................................................................................................... 4 System Specifications ..................................................................
APC-18W9 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Component Mother Board CPU Memory Adapter Wireless LAN EBM-BYT Onboard Intel® Atom Quad-Core J1900 2.0GHz with Integrated Chipset One 204-pin DDR3L SODIMM Socket Supports Up to 8GB DDR3L 1333 SDRAM +12 Vdc / 5 A (60W) Optional MPCIe WiFi module Storage Hard Disk Drive Solid State Drive One 2.5" SATA HDD Optional 2.5" SATA SSD Other Storage Device Optional mSATA Panel LCD Panel 18.
APC-18W9 Vibration Test Follow standard ones Mechanical Shock Test Follow standard ones Drop Test Follow standard ones Operating Temperature 0 to 40°C Operating Humidity 5%~90% relative humidity, non-condensing Storage Temperature -10 to 50°C Note: Specifications are subject to change without notice.
Quick Reference Guide 1.4 System Overview 1.4.1 Front View Note: Programmable keys are available to be programmed by the user; they are unable to work unless programmed.
APC-18W9 1.4.2 Rear View Connectors Label Function Note COM Serial port connector DB-9 male connector DC in DC-in power connector HDD HDD LED LAN1 RJ-45 Ethernet connector 1 KBMS/LAN2 PS/2 keyboard & mouse RJ-45 Ethernet connector 2 LINE OUT Line-out audio jack PWR Power LED Reset Rest button USB 1 x USB 2.0 connector 1 x USB 3.
Quick Reference Guide 1.
APC-18W9 2. Hardware Configuration For advanced information, please refer to: 1- EBM-BYT User’s Manual Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 APC-18W9 connector mapping 2.1.
APC-18W9 2.2 Stand Installation Step 1. Attach one side of the mounting to your system by means of 4 screws as indicated Step 2. Properly seat the other side of the stand into the plastic plate. Step 3. Attach the stand to the plate by means of 2 screws and Install rubber feet onto the bottom of the plate.
