ASM-CDV Fanless Intel® Atom™ D2550 1.86GHz CPU Ultra Slim PC with Intel® NM10 Express Chipset Quick Reference Guide 2nd Ed – 9 August 2013 Copyright Notice Copyright© 2013 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
ASM-CDV FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
ASM-CDV 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications System Board EBM-CDV CPU Onboard Intel® Atom™ D2550 1.86GHz CPU BIOS AMI 16Mbit SPI BIOS System Chipset Intel® NM10 Express Chipset System Memory One 204-pin SODIMM Supports Up to 4GB DDR3 1066MHz SDRAM SSD One CompactFlash Type I/II Socket Audio Realtek ALC892 Support 5.1-CH Audio Ethernet Dual Intel® 82574L Gigabit Ethernet System Indicators 4 LED Indicators Show Power and HDD Status Drive Bay Mounting Kit for One 2.
ASM-CDV 1.4 System Overview 1.4.1 Front View POWER Connectors Label Function POWER Power on button LINE IN Line-in audio jack LINE OUT Line-out audio jack MIC IN Mic-in audio jack 1.4.
Quick Reference Guide Connectors Label Function Note CF CF Type I/II Socket with Ejector COM1 Serial port 1 DB-9 male connector COM2 Serial Port 2 DB-9 male connector LINE OUT Line-out audio jack USB 2 x USB 2.
ASM-CDV 1.5 System Dimensions 1.5.
Quick Reference Guide 1.5.
ASM-CDV 2. Hardware Configuration 2.1 Connector Setting, Driver and BIOS Installing Please refer to EBM-CDV Quick Installation Guide or User’s Manual. Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.2 Installing Hard Disk & Memory Step 1. Remove 10 screws from the case, and 4 screws from COM and VGA ports. Step 2. Remove the front cover. Step 3. Remove the top chassis. Step 4. Install the DDR SODIMM into the memory socket. Step 5-1. HDD installation: Connect the HDD to SATA connector via SATA cable, as shown above. Step 5-2. Place HDD and SATA cable as shown above for a proper installation of the HDD.
ASM-CDV Step 5-3. Insert the HDD into the Drive Bay. Remember Step 6. Reassemble the top chassis and fasten with 3 screws. to properly seat the HDD so as to match screws and HDD holes. Step 7. Fasten 4 screws from the bottom chassis. 12 ASM-CDV Quick Reference Guide Step 8. Reassemble the rear chassis and fasten 3 screws to lock.
