EBM-PNV Intel® Atom™ Dual-Core 5.25” Mini Module with Intel® ICH8-M Chipset User’s Manual 1st Ed – 22 August 2011 Part No.
EBM-PNV User’s Manual FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
EBM-PNV User’s Manual If you still cannot find the answer, gather all the information or questions that apply to your problem, and with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the support you need to get the most from your Avalue‟s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue‟s engineers every business day.
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by people other than repair personnel authorized by Avalue, or that have been subject of misuse, abuse, accident or improper installation.
EBM-PNV User’s Manual Contents 1. Getting Started ............................................................................................................ 9 1.1 Safety Precautions .................................................................................................... 9 1.2 Packing List ............................................................................................................... 9 1.3 Document Amendment History ..............................................................
User’s Manual 2.4.22 LVDS connector (JLVDS2) ........................................................................................................ 37 2.4.23 Touch panel connector (JTOUCH) ............................................................................................ 38 2.4.24 USB connector 4&5, 2&3, 6&7 (JUSB1/ JUSB2)....................................................................... 38 2.4.25 USB connector 9 (JUSB4) ...............................................................
EBM-PNV User’s Manual 3.6.6.2 3.6.7 South Bridge Configuration ........................................................................................................ 67 Exit Options .................................................................................................................................... 68 3.6.7.1 Save Changes and Exit ............................................................................................................. 68 3.6.7.2 Discard Changes and Exit ...........
User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
EBM-PNV User’s Manual 1.
User’s Manual 1.4 Manual Objectives This manual describes in details Avalue Technology EBM-PNV Single Board. We have tried to include as much information as possible but we have not duplicated information that is already being provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with EBM-PNV series or change the standard configurations.
EBM-PNV User’s Manual 1.5 System Specifications System ® CPU Onboard Intel Atom™ D525 Dual-Core 1.8GHz CPU FSB 800 MHz BIOS AMI 8Mbit Flash BIOS System Chipset Intel® ICH8-M Chipset (2.4W) I/O Chip Winbond W83627DHG-P Onboard 1GB DDR3 SDRAM & One 204-pin SODIMM Supports Up to System Memory 3GB DDR3 SSD One CompactFlash Type I/II Socket Watchdog Timer Reset: 1 ~ 255min. and 1sec. or 1min./step Monitoring System Temperature, Voltage, and Cooling H/W Status Monitor Fan Status.
User’s Manual Audio HD Codec Realtek ALC888 Supports 5.1-CH Audio Audio Interface Mic-in, Line-in, Line-out Audio Amplifier 2 x 2W Ethernet LAN 1 Intel® 82574L PCI-E Gigabit Ethernet Intel® 82574L PCI-E Gigabit Ethernet LAN 2 (Optional 1 x PS/2 Keyboard & Mouse) Ethernet Interface 1000 Base-Tx Gigabit Ethernet Compatible Mechanical & Environmental Power Consumption +12V @ 1.
EBM-PNV User’s Manual 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EBM-PNV.
User’s Manual 2.
EBM-PNV User’s Manual 2.
User’s Manual 2.2 Installation Procedure This chapter provides you the instructions on how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
EBM-PNV User’s Manual 2.2.1 Main Memory EBM-PNV provides Onboard 1GB DDR3 SDRAM and One 204-pin SODIMM Supporting Up to 3GB DDR3 SODIMM Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Avoid touching its connectors.
User’s Manual Align the notch key on the module with the rib on the slot. Firmly press the modules into the socket which automatically snaps into the mounting notch. Do not force the SODIMM module in with extra force as the SODIMM module only fits in one direction. Mounting Notch Notch Key Ejector Tab 204-pin DDR3 SODIMM To remove SODIMM modules, simultaneously push the two ejector tabs outward, then pull out the SODIMM module.
EBM-PNV User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
User’s Manual Connectors Label BAT CFCARD COM1 CPU_FAN DIMM JAUDIO JBKL1 JBKL2 Function Battery connector Compact Flash card connector Serial Port 1 connector CPU fan connector 204-pin DDR3 SODIMM socket Audio connector LCD Inverter connector LCD Inverter connector Note 2 x 1 wafer, pitch 1.
EBM-PNV User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT) Protect* Clear CMOS * Default 2.4.
User’s Manual 2.4.3 Serial port 1/ 2 - RS-232/ 422/ 485 mode select (SW2) In Serial Port 1 mode RS-232 RS-422 RS-485 1 ON OFF OFF 2 OFF ON OFF 3 OFF OFF ON In Serial Port 2 mode 2.4.
EBM-PNV User’s Manual 2.4.5 Serial port 1/ 2 RS-232/ 422/ 485 mode select (JP1/ JP2) RS-232* JP2 JP1 RS-422/ 485 * Default 2.4.
User’s Manual 2.4.
EBM-PNV User’s Manual 2.4.8 LCD backlight brightness adjustment (JVR1) Mode1: VR type Mode 2: DC type* * Default Signal PIN PIN Signal +5V 1 2 DC VR 3 4 VR GND 5 6 PWM Note: DC: 0V ~5V Mode 3: Pulse-Width Modulated type Variation Resistor (Recommended: 4.7KΩ, >1/16W) Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JBKL1. Please see the JBKL1 section for detailed circuitry information.
User’s Manual 2.4.9 LCD backlight brightness adjustment (JVR2) Mode1: VR type Mode 2: DC type* * Default Note: DC: 0V ~5V Signal PIN PIN Signal +5V 1 2 DC2 VR 3 4 VR GND 5 6 PWM2 Mode 3: Pulse-Width Modulated type Variation Resistor (Recommended: 4.7KΩ, >1/16W) Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JBKL2. Please see the JBKL2 section for detailed circuitry information.
EBM-PNV User’s Manual 2.4.10 2.4.
User’s Manual 2.4.12 LCD Inverter connector (JBKL1/ JBKL2) Signal PIN +5V 5 BRIGHT 4 BLK_ON 3 GND 2 +12V 1 JBKL1 JBKL2 Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JVR1/ JVR2. Please see the JVR1/ JVR2 section for detailed circuitry information. 2.4.12.1 Signal Description – LCD Inverter Connector (JBKL1/ JBKL2) Signal Signal Description BRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.
EBM-PNV User’s Manual 2.4.
User’s Manual 2.4.
EBM-PNV User’s Manual 2.4.15 2.4.
User’s Manual 2.4.
EBM-PNV User’s Manual 2.4.18 Serial port 3/ 4/ 5/ 6 connector (JCOM3/ JCOM4/ JCOM5/ JCOM6) JCOM3 JCOM4 JCOM5 JCOM3 JCOM6 Signal 2.4.
User’s Manual 2.4.20 LED indicator connector (JLED) Signal PIN PIN Signal GND 1 2 +3.3V HD_ACT# 3 4 +3.3V LAN1_ACT 5 6 3.3V_SB LAN2_ACT 7 8 3.
EBM-PNV User’s Manual 2.4.21 LVDS connector (JLVDS1) Signal PIN PIN +5V 2 1 +5V 4 3 2 Signal +3.3V +3.3V 2 I C_DAT 6 5 I C_CLK GND 8 7 GND Txout0 10 9 Txout1 Txout0# 12 11 Txout1# GND 14 13 GND Txout2 16 15 NC Txout2# 18 17 NC GND 20 19 GND NC 22 21 NC NC 24 23 NC GND 26 25 GND NC 28 27 NC NC 30 29 NC GND 32 31 GND Txclk 34 33 NC Txclk# 36 35 NC GND 38 37 GND +12V 40 39 +12V 2.4.21.
User’s Manual 2.4.22 LVDS connector (JLVDS2) Signal PIN PIN Signal +5V 2 1 +3.3V +5V 4 3 +3.
EBM-PNV User’s Manual 2.4.23 Touch panel connector (JTOUCH) Signal PIN UL 1 UR 2 PROBE 3 LR 4 LL 5 NOTE: Under 4W situation UL=X+, UR=Y+, LR=Y-, LL=X- 2.4.
User’s Manual 2.4.25 2.4.26 USB connector 9 (JUSB4) Signal PIN +5V 1 D- 2 D+ 3 GND 4 GND 5 +3.
EBM-PNV User’s Manual 3.
User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it.
EBM-PNV User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer is no longer able to boot, the AMI BIOS supports an override to the CMOS settings which resets your system to its defaults.
EBM-PNV User’s Manual 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Time Use the system Date option to set the system date.
User’s Manual 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus.
EBM-PNV User’s Manual 3.6.2.1 CPU Configuration Item Options Description Disabled, This item allows you to limit CPUID maximum Enabled value. Execute-Disable Bit Disabled, This item allows you to enable or disable the Capability Enabled No-Execution page protection technology. Hyper Threading Disabled, This item allows you to enable or disable Technology Enabled Intel® Hyper Threading technology. Disabled, This item allows you to enable or disable Enabled Intel® SpeedStep™ tech.
User’s Manual 3.6.2.2 IDE Configuration Item Options Disabled, ATA/ IDE Configuration Compatible, Enhanced IDE, Configure SATA as RAID, AHCI Description This can be configured as Disabled, Compatible or Enhanced. Use the configure SATA as BIOS option to configure the SATA port as an IDE drive, a SATA drive (AHCI mode) or a SATA drive in a RAID configuration.
EBM-PNV User’s Manual 3.6.2.2.1 AHCI Configuration While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detection of IDE devices. Item SATA Port 0/ 1/ 2 S.M.A.R.T. 48 EBM-PNV User‟s Manual Options Auto, Not Installed Description Serial port 0/ 1/ 2 mode select. Disabled, Select the smart monitoring, analysis, and Enabled reporting technology.
User’s Manual 3.6.2.3 Super I/O Configuration You can use this item to set up or change the Super IO configuration for FDD controllers, parallel ports and serial ports. Item Options Description Disabled, Serial Port 1/ 2/ 3/ 4/ 5/ 6 3F8, 2F8, This item allows you select serial port 1 ~ 6 of Address 3E8, 2E8, base addresses. 2F0, 2E0 Serial Port 2/ 5/ 6 Type Serial Port 3/ 4/ 5/ 6 IRQ 422, This item allows you select serial port 2/ 5/ 6 of 485 type.
EBM-PNV User’s Manual 3.6.2.4 Hardware Health Configuration This section allows you to control H/W monitoring. 3.6.2.5 ACPI Settings You can use this item to set up ACPI Configuration. Please refer to 3.5.2.5.1 ~ 3.5.2.5.3 for more details.
User’s Manual 3.6.2.5.1 General ACPI Configuration Item Options S1 (POS), Suspend Mode S3 (STR), Auto Repost Video on S3 Resume Deep S5 Description Select the ACPI states used for system suspend. No, This item allows you to invoke VGA BIOS Yes POST on S3/ STR resume. Disabled, All PME/ wakeup event will be disabled in S4/ Enabled S5 mode when enabled DEEP S5. Note: Deep S5=ErP ErP mode: 1. No Timer-Power-On 2.
EBM-PNV User’s Manual 3.6.2.5.2 Advanced ACPI Configuration Item Options ACPI v1.0, ACPI Version Features ACPI v2.0, ACPI v3.0 ACPI APIC support AMI OEMB table Headless mode 52 EBM-PNV User‟s Manual Description This item allows you enable RSDP pointers to 64-bit fixed system description tables. Enabled, Include APIC table pointer to RSDT pointer Disabled list. Enabled, Include OEMB table pointer to R(x)SDT Disabled pointer list.
User’s Manual 3.6.2.5.3 Chipset ACPI Configuration Item Energy Lake Feature APIC ACPI SCI IRQ USB Device Wakeup From S3/ S4 High Performance Event Timer Options Description Disabled, This item allows selecting energy lake feature Enabled mode. Disabled, This item allows to enable/ disable APIC ACPI Enabled SCI IRQ. Disabled, This item allows selecting USB device wakeup Enabled mode. Disabled, This section helps to set high performance Enabled event timer.
EBM-PNV User’s Manual 3.6.2.6 USB Configuration The USB configuration menu is used to read USB configuration information and configure the USB setting. Item Options Description Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, Enabled, Legacy USB Support Disabled, Auto any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
User’s Manual 3.6.2.7 APM Configuration The APM Configuration menu allows the advanced power management options to be configured. Item Restore on AC Power Loss by IO Options Power On, Power Off, Last State Description Use this to set up the system response after a power failure. Use the Resume on Ring BIOS option to Resume On Ring Disabled, Enabled enable activity on the RI (ring in) modem line to rouse the system from a suspend or standby state.
EBM-PNV User’s Manual 3.6.3 Advanced PCI/ PnP Settings Item Options Description Set this value to force the BIOS to clear the Clear NURAM No, Non-volatile Random Access Memory Yes (NVRAM). The Original and Fail-Safe default setting is No. When set No, BIOS configures all the device Plug & Play O/S No, Yes in the system. When set to Yes and if you still a Plug and Play operating system, the operating system configures the plug and Play device not required for boot.
User’s Manual PCI IDE BusMaster Disabled, Enabled When set to enabled BIOS uses PCI busmastering for reading/ writing to IDE drives. Some PCI IDE cards may require this to be set OffBoard PCI/ ISA IDE Auto, Card PCI Slot 1/ 2/ 3/ 4/ 5/ 6 to the PCI slot number that is holding the card. When set to auto will works for most PCI IDE cards. IRQ3/ 4/ 5/ 7/ 9/ 10/ 11 Available, Reserved Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device. 3.6.
EBM-PNV User’s Manual 3.6.4.1 Boot Settings Configuration Item Quick Boot Quiet Boot AddOn ROM Display Mode Bootup Num-Lock Options Description Disabled, Use the quick boot BIOS option to make the Enabled computer speed up the boot process. Disabled, Use the quiet boot BIOS option to select the Enabled screen display when the system boots. Force BIOS, Keep Curren On, Off The AddOn ROM Display Mode option allows add-on ROM (read-only memory) messages to be displayed.
User’s Manual 3.6.4.2 Boot Device Priority Use the Boot Device Priority menu to specify the boot sequence from the available devices. 3.6.4.3 Hard Disk Devices Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs.
EBM-PNV User’s Manual 3.6.4.4 Removable Devices Use the Removable Drives menu to specify the boot sequence of the available FDDs. 3.6.5 Security Settings Use the Security menu to set system and user password.
User’s Manual 3.6.5.1 Change Supervisor/ User Password To either install or change the password.
EBM-PNV User’s Manual 3.6.5.2 Clear User Password Use the Clear User Password to clean a user password. 3.6.5.3 Boot Sector Virus Protection The boot sector virus protection will warn if any program tries to write to the boot sector.
User’s Manual 3.6.6 Advanced Chipset Settings Use the chipset menu to access the Northbridge and Southbridge configuration menus.
EBM-PNV User’s Manual 3.6.6.1 North Bridge Configuration Item DRAM Frequency Option Auto, Description This item allows you to manually 667MHz change DRAM frequency. Configure DRAM Timing by Disabled, This item allows you to enable or SPD Enabled disable by DRAM SPD. Initate Graphic Adapter IGD, PEG/IGD Disabled, Internal Graphics Mode Select PEG Port Configuration 64 EBM-PNV User‟s Manual This item allows you to select which graphics controller to use as the primary boot device.
User’s Manual 3.6.6.1.1 Video Function Configuration Item Option Fixed Mode, DVMT Mode Select DVMT Mode, Combo Mode DVMT/ FIXED Memory Description Displays the active system memory mode. 64MB, Specifies the amount of DVMT/ 128MB, FIXED system memory to allocate Maximum DVMT for video memory. VBIOS-Default, Boot Display Device CRT, Select boot display device at post LVDS, stage.
EBM-PNV User’s Manual 640 x 480, This item allows you to select 800 x 600, which panel resolution you want. 1024 x 768, 1024 x 600, 1024 x 576, 800 x 480, 1280 x 720, Flat Panel Type 1280 x 768, 800 x 600, 1024 x 600, 1024 x 768, 1024 x 768, 1024 x 768, 1280 x 800, 1280 x 600, 1366 x 768 RTD-2553 Chip EDID support Disabled, This item allows you to enable or Enabled disable RTD-2553 Chip EDID support.
User’s Manual 3.6.6.2 South Bridge Configuration Item USB Functions USB 2.0 Controller HAD Controller SMBUS Controller PCIe Wake LAN Boot rom Option Disables, 2/ 4/ 6/ 8/ 10 USB Ports Disabled, Enabled Disabled, Enabled Disabled, Enabled This option enables the number of USB ports desired or disables the USB function. This option is disabled by default. This option is used to enable the southbridge high definition audio controller. This option is enabled by default.
EBM-PNV User’s Manual 3.6.7 Exit Options Use the Exit menu to load default BIOS values, optional failsafe values and to save configuration changes. 3.6.7.1 Save Changes and Exit Use the save changes and reset option to save the changes made to the BIOS options and to exit the BIOS configuration setup program.
User’s Manual 3.6.7.2 Discard Changes and Exit Use the Discard changes and Exit option to exit the system without saving the changes made to the BIOS configuration setup program. 3.6.7.3 Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program.
EBM-PNV User’s Manual 3.6.7.4 Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the setup menus. F9 key can be used for this operation. 3.6.7.5 Load Failsafe Defaults Use the Load Failsafe Defaults option to load failsafe default values for each of the parameters on the Setup menus. F8 key can be used for this operation.
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
EBM-PNV User’s Manual 4.1 Install Chipset Driver (For Intel ICH8-M) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue‟s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\ICH8-M. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step 3.
User’s Manual 4.2 Install Display Driver (For Intel Pineview) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue‟s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Video\Intel\Pineview. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Yes. Step 1. Locate「Driver_Video\Intel\ Pineview\Setup.exe」. Step 2. Click Next. Step 4.
EBM-PNV User’s Manual 4.3 Install Audio Driver (For Realtek ALC888) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue‟s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek \ALC888. Note: The installation procedures and screen shots in this section are based on Windows 2000 operation system. Step 1. Locate 「\Driver_Audio\Intel\ 6300ESB ALC888\setup.exe」. Step 2. Select Next to the next step.
User’s Manual 4.4 Install Ethernet Driver (For Intel 82574L) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue‟s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to D:\Driver_Gigabit\Intel\ 82574L. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 1. Locate 「\Driver_Gigabit\Intel\ 82574L」and choose your system OS. Step 2. Click Next. Step 3.
EBM-PNV User’s Manual Step 5. Click Install to next step. Step 6. Click Next to next step. Step 7. Click Finish to complete the setup.
User’s Manual 5.
EBM-PNV User’s Manual Unit: mm 78 EBM-PNV User‟s Manual
User’s Manual Unit: mm EBM-PNV User‟s Manual 79
