EBM-QM87U Intel® 4th Generation ULT Processor 5.25” Mini Module User’s Manual 1st Ed – 06 May 2014 Part No.
EBM-QM87U User’s Manual FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
EBM-QM87U User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
User’s Manual Content 1. Getting Started ............................................................................................................ 8 1.1 Safety Precautions .................................................................................................... 8 1.2 Packing List ............................................................................................................... 8 1.3 Document Amendment History .......................................................................
EBM-QM87U User’s Manual 2.3.25 LPC connector (JLPC) ............................................................................................................... 31 2.3.26 SPI connector (JSPI) ................................................................................................................. 31 2.3.27 EC_Program (JEC_SPI) ............................................................................................................ 32 3.BIOS Setup .........................................
User’s Manual 3.6.3.2 System Agent (SA) Configuration .......................................................................................... 59 3.6.3.2.1 Graphics Configuration .......................................................................................................... 59 3.6.3.2.1.1 LCD Control ........................................................................................................................... 60 3.6.3.2.2 Memory Configuration .....................................
EBM-QM87U User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
User’s Manual 1.
EBM-QM87U User’s Manual 1.4 Manual Objectives This manual describes in details Avalue Technology EBM-QM87U Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to set up EBM-QM87U series or change the standard configurations.
User’s Manual 1.5 System Specifications System CPU BIOS Intel® 4th Generation ULT 2 Cores BGA w/Integrated Lynx Point PCH (2 Die MCP) (Co-layout w/Core i7/i5/i3) AMI uEFI BIOS, 128 Mbit SPI Flash ROM iAMT 9.5 Supported System Chipset Intel® Lynx Point (2 Die MCP; Integrated in Processor) I/O Chip E/C IT8528E System Memory 2 x 204-pin DDR3L SODIMM Up to 8GB Per DIMM SSD Watchdog Timer H/W Status Monitor Expansion One CompactFlash Type I/II Socket Reset: 1sec. ~ 65535sec. and 1sec. /step.
EBM-QM87U User’s Manual Ethernet LAN Chip Ethernet Interface 1 x Intel® I210AT Gigabit Ethernet controller 1 x Intel® I218LM Gigabit Ethernet PHY 10/100/1000 Base-Tx Gigabit Ethernet Compatible Mechanical & Environmental Power Requirement +12V ~ +26V Power Type AT or ATX Mode Operating Temp. 0~60°C (32~140°F) Storage Temp. -40 ~ 75°C (-40 ~ 167°F) Operating Humidity Size (L x W) Weight 0% ~ 90% Relative Humidity, Non-condensing 8" x 5.75" (203mm x 146mm) 0.55lb (0.
User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EBM-QM87U.
EBM-QM87U User’s Manual 2.
User’s Manual 2.
EBM-QM87U User’s Manual 2.2 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
User’s Manual 4 x 1 wafer, pitch 2.54mm CPU_FAN CPU fan connector SYS_FAN SODIMM1/2 JAUDIO JBKL1 JBKL2 JCOM2 JCOM3 JCOM4 JCOM5 JCOM6 System fan connector 204-pin DDR3 SODIMM socket Audio connector LCD Inverter connector LCD Inverter connector Serial Port 2 connector Serial Port 3 connector Serial Port 4 connector Serial Port 5 connector Serial Port 6 connector 4 x 1 wafer, pitch 2.54mm JDIO JLED LED1 JLVDS 10 x 2 wafer, pitch 2.00mm 5 x 2 wafer, pitch 2.
EBM-QM87U User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 SATA Power select (JP1) * Default 2.3.
User’s Manual 2.3.3 Multi-function select (SW1) ON OFF 1 AT SEL ATX SEL 2 CF Slave CF Master 3 Touch off Touch on 4 NC NC 5 6 2.3.
EBM-QM87U User’s Manual 2.3.5 Serial port 1/ 2 pin9 signal select (JRI1/ JRI2) Ring* +12V +5V JRI2 JRI1 * Default 2.3.
User’s Manual 2.3.7 LCD Inverter connector (JBKL1) Signal PIN +12V 1 GND 2 BKLEN 3 VBRIGHT 4 +5V 5 Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JVR. Please see the JVR section for detailed circuitry information. 2.3.
EBM-QM87U User’s Manual 2.3.9 CPU fan connector (CPU_FAN) 2.3.
User’s Manual 2.3.
EBM-QM87U User’s Manual 2.3.12 Serial port 3/ 4/ 5/ 6 connector (COM3/ COM4/ COM5/ COM6) Signal PIN PIN Signal JCOM6 COM_RI# 9 10 NC JCOM4 COM_RTS# 7 8 COM_CTS# JCOM3 GND 5 6 COM_DSR# COM_TXD 3 4 COM_DTR# COM_DCD# 1 2 COM_RXD JCOM5 2.3.
User’s Manual 2.3.14 General purpose I/O connector (JDIO) Signal 2.3.
EBM-QM87U User’s Manual 2.3.16 2.3.
User’s Manual 2.3.
EBM-QM87U User’s Manual 2.3.19 2.3.
User’s Manual 2.3.21 Battery connector (BT1) 2.3.22 Signal PIN GND 2 +VBAT 1 PIN PIN Signal Audio connector (JAUDIO) Signal LINEOUT_R 2 1 LINEOUT_L GND 4 3 GND LINE1_RIN 6 5 LINE1_LIN MIC_RIN 8 7 MIC_LIN FRONT_JD 10 9 LINE1_JD MIC1_JD 12 11 GND 2.3.22.
EBM-QM87U User’s Manual 2.3.23 2.3.
User’s Manual 2.3.25 LPC connector (JLPC) Signal 2.3.
EBM-QM87U User’s Manual 2.3.
User’s Manual 3.
EBM-QM87U User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins the process of checking out the system and configuring it.
User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
EBM-QM87U User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the NVRAM settings which resets your system to its defaults.
User’s Manual 3.6 BIOS setup Once you enter the Aptio Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Language This option allows choosing the system default language. 3.6.1.
EBM-QM87U User’s Manual 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.1 APCI Settings Item Enable ACPI Auto Configuration Enable Hibernation 38 EBM-QM87U User’s Manual Options Disabled[Default], Enabled Disabled Description Enables or Disables BIOS ACPI Auto Configuration.
User’s Manual Enabled[Default], Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. Select ACPI sleep state the system will enter when the SUSPEND button is pressed. ACPI Sleep State Suspend Disabled, S3 only (Suspend to RAM)[Default] S3 Video Repost Disabled[Default], Enabled Enable or Disable S3 Video Repost. ACPI Low Power SO Id1e Disabled[Default], Enabled Enable or Disable ACPI Low Power S0 Id1e Support.
EBM-QM87U User’s Manual 3.6.2.2 S5 RTC Wake Settings Item Options Wake system from S5 Disabled[Default], Fixed Time Dynamic Time Description Enable or disable System wake on alarm event. Select Fixed Time, system will wake on the hr::min::sec specified. Select Dynamic Time, System will wake on the current time + Increase minute(s). 3.6.2.3 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
User’s Manual Item Options Hyper-threading Disabled Enabled[Default] Active Processor Cores All[Default] 1/2/3 Intel Virtualization Technology Disabled Enabled[Default] EIST CPU C states Enhanced C1 state CPU C3/6 Report C6 Latency CPU C7 Report C7 Latency Package C State limit Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Short[Default] Long Disabled CPU C7 CPU C7s[Default] Short Long[Default] C0/C1 C2 C3 C6 C7 C7s AUTO[Default] Descri
EBM-QM87U User’s Manual 3.6.2.4 SATA Configuration Item SATA Controller(s) SATA Mode Selection Options Disabled, Enabled[Default] IDE AHCI[Default], RAID SATA Test Mode Disabled[Default], Enabled SATA Controller Speed Default Gen1 Gen2 Gen3 42 EBM-QM87U User’s Manual Description Enable or disable SATA Device. Determines how SATA controller(s) operate. Enable or disable Test Mode. Indicates the maximum speed the SATA controller can support.
User’s Manual 3.6.2.4.1 Software Feature Mask Configuration Item RAID0/1/5 Smart Response Technology Option Enabled[Default], Disabled Enabled[Default], Disabled Description Enable or disable RAID0/1/5 feature. Enable or disable Smart Response Technology. 3.6.2.5 Intel® Rapid Start Technology Item Intel® Rapid Start Technology Options Disabled[Default], Enabled Description Enable or disable Intel® Rapid Start Technology.
EBM-QM87U User’s Manual 3.6.2.6 PCH-FW Configuration 3.6.2.7 AMT Configuration Item Options Intel AMT Disabled, Enabled[Default] 44 EBM-QM87U User’s Manual Description Enable/Disable Intel® Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device.
User’s Manual Un-Configure ME OEMFlag Bit 15: Un-Configure ME without password. Disable ME Disabled[Default], Enabled Set Me to Soft Temporary Disabled. 3.6.2.8 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. Item Options Legacy USB Support Enabled[Default] Disabled Auto USB3.
EBM-QM87U User’s Manual 40 sec Auto[Default] Manual Device power-up delay Maximum time the device will take before it properly reports itself to the Host Controller. ‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken form Hub descriptor. 3.6.2.9 Super IO Configuration You can use this item to set up or change the Super IO configuration for serial ports. Please refer to 3.6.2.9.1~3.6.2.9.6 for more information.
User’s Manual 3.6.2.9.1 Serial Port 1 Configuration Item Serial Port Change Settings UART 232 422 485 UART SLEW UART TERM Option Enabled[Default], Disabled Auto[Default] IO=3F8h; IRQ=4; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=33,4,5,6,7,9,10,11,12; UART 232[Default], UART 485, UART 422 Enabled[Default], Disabled Enabled, Disabled[Default] Description Enable or Disable Serial Port (COM).
EBM-QM87U User’s Manual 3.6.2.9.
User’s Manual 3.6.2.9.3 Serial Port 3 Configuration Item Serial Port Change Settings Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=3F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for super IO device.
EBM-QM87U User’s Manual 3.6.2.9.4 Serial Port 4 Configuration Item Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=2F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for super IO device. Serial Port Change Settings 3.6.2.9.
User’s Manual Item Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=3E8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=200h; IRQ=3,4,5,6,7,9,10,11,12; IO=208h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for super IO device. Serial Port Change Settings 3.6.2.9.
EBM-QM87U User’s Manual 3.6.2.10 H/W Monitor Item Smart Fan Function Options Enabled, Disabled[Default] Description Enables or Disables Smart Fan. 3.6.2.11 Intel® Smart Connect Technology Item ISCT Support 52 EBM-QM87U User’s Manual Options Enabled, Disabled[Default] Description Enables/Disables ISCT Support.
User’s Manual 3.6.2.12 Network Stack Item Network stack 3.6.3 Options Enabled, Disabled[Default] Description Enables/Disables UEFI network stack.
EBM-QM87U User’s Manual 3.6.3.1 PCH-IO Configuration Item PCH LAN Controller Option Enabled[Default], Disabled 3.6.3.1.1 PCI Express Configuration 54 EBM-QM87U User’s Manual Description Enable or disable onboard NIC.
User’s Manual 3.6.3.1.1.
EBM-QM87U User’s Manual 56 EBM-QM87U User’s Manual
User’s Manual Item PCI Express Root Port 2/3/4/5/6 ASPM Support PCIe Speed Option Enabled[Default], Disabled Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s State: AUTO – BIOS auto configure: DISABLE – Disables ASPM. Select PCI Express port speed. 3.6.3.1.
EBM-QM87U User’s Manual Item Option Smart Auto[Default] Disabled XHCI Mode USB Ports Per-Port Disable Control Enabled Disabled[Default] Description Mode of operation of xHCI controller. Control each of the USB ports (0~13) disabling. 3.6.3.1.3 PCH Azalia Configuration Item Option Azalia Disabled[Default] Enabled Auto 58 EBM-QM87U User’s Manual Description Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled. Enabled = Azalia will be unconditionally Enabled.
User’s Manual 3.6.3.2 System Agent (SA) Configuration Item Option Disabled Enabled[Default] VT-d Description Check to enable VT-d function on MCH. 3.6.3.2.1 Graphics Configuration Item Primary Display Option Auto[Default], IGFX PEG PCIE SG Description Select which of IGFX/PEG/PCI Graphics device should be Primary Display.
EBM-QM87U User’s Manual Primary PCIE Internal Graphics Aperture Size DVMT Pre-Allocated DVMT Total Gfx Mem 3.6.3.2.1.1 Auto[Default], PCIE1 PCIE2 PCIE3 PCIE4 PCIE5 PCIE6 PCIE7 Auto[Default] Enabled, Disabled 128MB 256MB[Default] 512Mb 32M[Default]/64M/96M/128M/160M/ 192M/224M/256M/288M/320M/352M/ 384M/416M/448M/480M/512M/1024M 128M 256M[Default] MAX Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4 /PCIE5/PCIE6/PCIE7 Graphics device should be Primary PCIE. Keep IGD enabled based on the setup options.
User’s Manual Int-LVDS: VBIOS enables LVDS driver by Integrated encoder. SDVO LVDS: VBIOS enables by SDVO encoder. eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A. eDP Port-D: LFP Driven by Int-DisplayPort encoder from Port-D (through PCH).
EBM-QM87U User’s Manual 3.6.3.2.2 Memory Configuration 3.6.4 Boot Item Option Setup Prompt Timeout 1~ 65535 Bootup NumLock State Quiet Boot 62 EBM-QM87U User’s Manual On[Default] Off Disabled[Default] Enabled Description Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Select the Keyboard NumLock state. Enables or disables Quiet Boot option.
User’s Manual Fast Boot Boot Option #1 CSM Parameters 3.6.5 Disabled[Default] Enabled Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Set the system boot order. OpROM execution, boot options filte, etc.
EBM-QM87U User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller.
User’s Manual 3.6.6.3 Restore Defaults This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices.
EBM-QM87U User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
User’s Manual 4.1 Install Chipset Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\EBM-QM87U. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4.
EBM-QM87U User’s Manual 4.2 Install ME Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\EBM-QM87U_ME. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to start installation.
User’s Manual 4.3 Install USB3.0 Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\EBM-QM87U_USB3.0. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to continue installation.
EBM-QM87U User’s Manual 4.4 Install VGA Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \VGA\EBM-QM87U. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next to continue installation. Step 2. Click Yes to accept license agreement. 70 EBM-QM87U User’s Manual Step 3.
User’s Manual 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek\ALC892\EBM-QM87U_Audio. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup.
EBM-QM87U User’s Manual 4.6 Install Ethernet Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Gigabit\Intel\I210\EBM-QM87U_LAN. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 3. Click Next. Step 4. Click Install to proceed. Step 1. Click Next. Step 5.
User’s Manual 5.
EBM-QM87U User’s Manual Unit: mm 74 EBM-QM87U User’s Manual
User’s Manual Unit: mm EBM-QM87U User’s Manual 75