ECM-BYT Intel® Bay Trail Processors 3.5” Micro Module User’s manual 4th Ed – 12 November 2014 Part No.
ECM-BYT User’s Manual FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
ECM-BYT User’s Manual otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Life Support Policy Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF Avalue Technology Inc. As used herein: 1.
ECM-BYT User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
ECM-BYT User’s Manual CONTENT 1. Getting Started ............................................................................................................ 8 1.1 Safety Precautions ......................................................................................... 8 1.2 Packing List .................................................................................................... 8 1.3 Document Amendment History....................................................................... 9 1.
ECM-BYT User’s Manual 2.4.22 Audio connector (JAUDIO1) .................................................................. 32 2.4.22.1 Signal Description – Audio connector (JAUDIO1) ................... 32 2.4.23 2.4.24 2.4.25 LVDS connector (JLVDS1).................................................................... 33 Power connector (PWR1)...................................................................... 34 SATA power connector (SATA_PWR1) ................................................ 34 3.
ECM-BYT User’s Manual 3.6.3.2.1 Azalia HD Audio ...................................................................... 58 3.6.3.2.2 USB Configuration .................................................................. 59 3.6.3.2.3 PCI Express Configuration ...................................................... 60 3.6.4 Security ............................................................................................... 60 3.6.5 Boot .........................................................................
ECM-BYT User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
ECM-BYT User’s Manual 1.
ECM-BYT User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology ECM-BYT Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with ECM-BYT series or change the standard configurations.
ECM-BYT User’s Manual 1.5 System Specifications System CPU BIOS System Chipset I/O Chip System Memory SSD Watchdog Timer H/W Status Monitor Expansion Built-in Touch screen (optional) Intel® Celeron® Processor J1900 Family Intel® Atom™ Processor E3800 Family AMI uEFI BIOS, 64Mbit SPI Flash ROM Valleyview SoC integrated EC(IT8528E) 1 x 204-pin DDR3L 1066/1333 SODIMM up to 8G 1 x CompactFlash Type I/II socket (Optional support InnoDIsk CF-SATA) H/W Reset, 1sec. – 65535sec./min. 1sec. or 1min.
ECM-BYT User’s Manual Environmental Power Requirement +12V ~ +26V ACPI Power Type Operating Temp. Storage Temp. Single power ATX Support S0, S3, S4, S5 ACPI 3.0 Compliant AT / ATX 0°C ~ 60°C Optional Wide temp.: -40°C ~85°C -40°C ~75°C Optional Wide temp.: -40°C ~85°C Operating Humidity 0% ~ 90% relative humidity, non-condensing Size (L x W) Weight 4.5" x 6.5" (115mm x 165mm) 0.41 lbs (0.
ECM-BYT User’s Manual 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of ECM-BYT.
ECM-BYT User’s Manual 2.
ECM-BYT User’s Manual 2.
ECM-BYT User’s Manual 16 ECM-BYT User’s Manual
ECM-BYT User’s Manual 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
ECM-BYT User’s Manual 2.2.1 Main Memory ECM-BYT provides one 204-pin DDR3L SODIMM socket, supports up to 8GB DDR3L 1066/1333 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Keep away of touching its connectors.
ECM-BYT User’s Manual Firmly press the modules into the socket automatically snaps into the mounting notch. Do not force the SODIMM module in with extra force as the SODIMM module only fit in one direction. To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module. Note: (1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase your system’s performance without acquiring technical information in advance.
ECM-BYT User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
ECM-BYT User’s Manual JAUDIO1 Audio connector 6 x 2 header, pitch 2.00 mm JBKL1 LCD inverter connector 5 x 1 wafer, pitch 2.00 mm Serial port 1 connector D-sub 9-pin, male Note：COM1 support COM1 RS422/485 by BIOS setting COM2/3/4 Serial port 2/3/4 connector 5 x 2 header, pitch 2.00 mm JDIO1 General purpose I/O connector 6 x 2 header, pitch 2.00 mm JFP1 Miscellaneous setting connector 5 x 2 header, pitch 2.00 mm JLPC1 Low pin count interface 5 x 2 header, pitch 2.
ECM-BYT User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS * Default 2.4.
ECM-BYT User’s Manual 2.4.3 AT/ ATX Input power select (JAT1) AT* ATX * Default 2.4.
ECM-BYT User’s Manual 2.4.5 Touch connector select jumper (JTOUCH_SEL1) 5W* 4W * Default 2.4.
ECM-BYT User’s Manual 2.4.7 Battery connector (BT1) 2.4.8 Signal PIN GND 2 +3.
ECM-BYT User’s Manual 2.4.9 PS/2 keyboard & mouse connector (JKBMS1) Signal PIN PIN Signal KBDT 1 2 KBCK GND 3 4 KBVCC MSDT 5 6 MSCK 2.4.10 LCD inverter connector (JBKL1) Signal PIN +5V 5 VBRIGHT 4 BKLEN 3 GND 2 +12V 1 2.4.10.1 Signal Description – LCD Inverter Connector (JBKL1) Signal Signal Description VBRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.
ECM-BYT User’s Manual 2.4.11 On-board header for USB2.0 (JUSB3_4) Signal PIN PIN Signal USBVCC23 1 2 GND USB_DN_R_3 3 4 GND USB_DP_R_3 5 6 USB_DP_R_2 GND 7 8 USB_DN_R_2 GND 9 10 USBVCC23 Signal PIN PIN Signal USBVCC_HSIC34 1 2 GND HSIC_DN_2 3 4 GND HSIC_DP_2 5 6 HSIC_DP_1 GND 7 8 HSIC_DN_1 GND 9 10 USBVCC_HSIC34 2.4.12 On-board header for USB2.
ECM-BYT User’s Manual 2.4.13 Low pin count connector (JLPC1) Signal PIN PIN Signal LPC_AD0 1 2 +3.3V LPC_AD1 3 4 LPC_PORT80_RST# LPC_AD2 5 6 LPC_FRAME# LPC_AD3 7 8 LPC_PORT80_CLK LPC_SERIRQ 9 10 GND 2.4.
ECM-BYT User’s Manual 2.4.15 Serial port 2 connector (COM2) Signal PIN PIN Signal COM_DCD#_2 1 2 COM_RXD_2 COM_TXD_2 3 4 COM_DTR#_2 GND 5 6 COM_DSR#_2 COM_RTS#_2 7 8 COM_CTS#_2 COM_RI#_2 9 10 NC 2.4.
ECM-BYT User’s Manual 2.4.17 Serial port 4 connector (COM4) Signal PIN PIN Signal COM_DCD#_4 1 2 COM_RXD_4 COM_TXD_4 3 4 COM_DTR#_4 GND 5 6 COM_DSR#_4 COM_RTS#_4 7 8 COM_CTS#_4 COM_RI#_4 9 10 NC 2.4.
ECM-BYT User’s Manual 2.4.19 Miscellaneous setting connector (JFP1) Signal PIN 1 PWBT 2 3 RST# 4 PWR-LED+ 5 PWR-LED- 6 HDD-LED- 7 HDD-LED+ 8 9 COPEN# 10 2.4.
ECM-BYT User’s Manual 2.4.21 EC Debug connector (JEC_ROM1) Signal PIN EC_SMCLK_DEBUG 1 EC_SMDAT_DEBUG 2 GND 3 PIN PIN Signal 2.4.22 Audio connector (JAUDIO1) Signal FRONT-R-OUT 1 2 FRONT-L-OUT HD_AGND 3 4 HD_AGND LINE1-R-IN 5 6 LINE1-L-IN MIC1-R-IN 7 8 MIC1-L-IN FRONT-JD 9 10 LINE1-JD MIC1-JD 11 12 HD_AGND 2.4.22.
ECM-BYT User’s Manual 2.4.23 LVDS connector (JLVDS1) Signal PIN PIN Signal +5V 2 1 +3.3V +5V 4 3 +3.
ECM-BYT User’s Manual 2.4.24 Power connector (PWR1) Signal PIN PIN Signal VIN_IN 3 1 GND VIN_IN 4 2 GND 2.4.
ECM-BYT User’s Manual 3.
ECM-BYT User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins the process of checking out the system and configuring it.
ECM-BYT User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
ECM-BYT User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the NVRAM settings which resets your system to its defaults.
ECM-BYT User’s Manual 3.6 BIOS setup Once you enter the Aptio Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Language This option allows choosing the system default language. 3.6.
ECM-BYT User’s Manual product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.
ECM-BYT User’s Manual Item Enable ACPI Auto Configuration Options Disabled[Default], Enabled Enable Hibernation Disabled Enabled[Default], ACPI Sleep State Suspend Disabled, S3 (Suspend to RAM) [Default] ErP Function Disabled[Default], Enabled PWR-On After PWR-Fail Watch Dog Off[Default] On Last state Disabled[Default], 30 sec 40 sec 50 sec 1 min 2 min 10 min 30 min Description Enables or Disables BIOS ACPI Auto Configuration. Enables or Disables System ability to Hibernate (OS/S4 Sleep State).
ECM-BYT User’s Manual Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB). Serial Port 3 Configuration Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). 3.6.2.2.
ECM-BYT User’s Manual 3.6.2.2.2 Serial Port 2 Configuration Item Serial Port Change Settings Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=2F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,10,11,12; Select an optimal setting for super IO device.
ECM-BYT User’s Manual 3.6.2.2.3 Serial Port 3 Configuration Item Serial Port Change Settings 44 ECM-BYT User’s Manual Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=3E8h; IRQ=5; IO=3F8h; IRQ=3,4,5,6,7,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,10,11,12; Select an optimal setting for super IO device.
ECM-BYT User’s Manual 3.6.2.2.4 Serial Port 4 Configuration Item Serial Port Change Settings Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM). Auto[Default] IO=2E8h; IRQ=10; IO=3F8h; IRQ=3,4,5,6,7,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,10,11,12; Select an optimal setting for super IO device.
ECM-BYT User’s Manual 3.6.2.3 H/W Monitor Item Smart Fan Function 3.6.2.4 S5 RTC Wake Settings 46 ECM-BYT User’s Manual Options Enabled, Disabled[Default] Description Enables or Disables Smart Fan.
ECM-BYT User’s Manual Item Options Wake system from S5 Disabled[Default], Enabled Description Enable or disable System wake on alarm event. Select Fixed Time, system will wake on the hr::min::sec specified. Select Dynamic Time, System will wake on the current time + Increase minute(s). 3.6.2.5 Serial Port Console Redirection Item Console Redirection Options Disabled[Default], Enabled Description Console Redirection Enable or Disable.
ECM-BYT User’s Manual 3.6.2.6 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. Item Active Processor Cores Limit CPUID Maximum Options All[Default], 1 Disabled[Default], Enabled Execute Disable Bit Disabled, Enabled[Default] Intel Virtualization Technology Disabled, Enabled[Default] Power Technology Disabled, Energy Efficient[Default] Custom 48 ECM-BYT User’s Manual Description Number of cores to enable in each processor package.
ECM-BYT User’s Manual 3.6.2.6.1 Socket 0 CPU Information 3.6.2.7 PPM Configuration Item EIST CPU C state Report Options Disabled, Enabled[Default] Disabled, Enabled[Default] Description Enable/Disable Intel SpeedStep. Enable/Disable CPU C state report to OS.
ECM-BYT User’s Manual Max CPU C-state C1/C6/C7[Default] This option controls Max C state that the processor will support. 3.6.2.8 IDE Configuration Item Serial-ATA (SATA) SATA Speed Support SATA ODD Port Options Enabled[Default] Disabled, Gen1 Gen2[Default] Port0 ODD Port1 ODD No ODD[Default] SATA Mode IDE Mode AHCI Mode[Default] Serial-ATA Port 0/1 Enabled[Default] Disabled, 50 ECM-BYT User’s Manual Description Enable/Disable Serial ATA. SATA Speed Support. SATA ODD is Port0 or Port1.
ECM-BYT User’s Manual 3.6.2.9 Network Stack Configuration Item Network Stack Options Enabled Disabled[Default] Description Enable/Disable UEFI Network Stack. 3.6.2.10 CSM Configuration Item CSM Support Options Enabled[Default] Disabled, Description Enable/Disable CSM Support.
ECM-BYT User’s Manual UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – go not allow disabling GA20; this option is useful when any RT code is executed above 1MB. GateA20 Active Upon Request[Default] Always Option ROM Messages Force BIOS[Default] Keep Current Set display mode for Option ROM. INT19 Trap Response Immediate[Default] Postponed BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE – execute the trap right away; POSTPONED – execute the traps during legacy boot.
ECM-BYT User’s Manual Item Options Legacy USB Support Enabled[Default] Disabled Auto XHCI Hand-off Enabled[Default] Disabled EHCI Hand-off Enabled Disabled[Default] Enabled[Default] Disabled 1 sec 5 sec 10 sec 20 sec[Default] 10 sec 20 sec[Default] 30 sec 40 sec USB Mass Storage Driver Support USB transfer time-out Device reset time-out Auto[Default] Manual Device power-up delay Description Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected.
ECM-BYT User’s Manual Intel® AT Inter® AT Platform PBA Disabled Enabled[Default], Disabled[Default], Enabled 3.6.2.13 Lan driver report status 54 ECM-BYT User’s Manual Enable/Disable BIOS AT Code from Running. Enable/Disable BIOS AT Code from Running.
ECM-BYT User’s Manual 3.6.3 Chipset 3.6.3.1 North Bridge Item Max TOLUD Option Dynamic[Default] 2 GB 2.25 GB 2.5 GB 2.75 GB 3 GB Description Maximum Value of TOLUD.
ECM-BYT User’s Manual 3.6.3.1.
ECM-BYT User’s Manual 3.6.3.1.
ECM-BYT User’s Manual 50% 75% 100%[Default] 3.6.3.2 South Bridge Item High Precision Timer 3.6.3.2.1 Azalia HD Audio 58 ECM-BYT User’s Manual Option Disabled Enabled[Default] Description Enable or Disable the High Precision Event Timer.
ECM-BYT User’s Manual Item Option Audio Controller Enabled[Default], Disabled HDMI Port B Enabled[Default], Disabled Description Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled. Enabled = Azalia will be unconditionally Enabled. Auto = Azalia will be enabled if present disabled otherwise. Enable/Disable HDMI Port B. 3.6.3.2.2 USB Configuration Item Option Description Please select the corresponding type of Windows for OS installation.
ECM-BYT User’s Manual 3.6.3.2.3 PCI Express Configuration Item PCI Express Port 0/1/2/3 Speed 3.6.4 Security 60 ECM-BYT User’s Manual Option Enabled[Default], Disabled Auto[Default] Gen 2 Gen 1 Description Enable or Disable the PCI Express Port 0/1/2/3 in the Chipset. Configure PCIe Port Speed.
ECM-BYT User’s Manual Administrator Password Set setup Administrator Password User Password Set User Password 3.6.5 Boot Item Option Setup Prompt Timeout 1~ 65535 Bootup NumLock State Quiet Boot On[Default] Off Disabled[Default] Enabled Fast Boot Disabled[Default] Enabled VGA Support Auto EFI Driver[Default] USB Support Disabled Full Initial Partial Initial[Default] Description Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
ECM-BYT User’s Manual USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be available in OS and Post. PS2 Devices Support NetWork Stack Driver Support Boot Option #1 3.6.6 Save and exit 62 ECM-BYT User’s Manual Disabled Enabled[Default] Disabled[Default] Enabled Set the system boot order. If Disabled, PS2 devices will be skipped. If Disabled, NetWork Stack Driver will be skipped.
ECM-BYT User’s Manual 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 3.6.6.3 Restore Defaults This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.
ECM-BYT User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
ECM-BYT User’s Manual 4.1 Install Chipset Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\ECM-BYT. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next. Step 3.
ECM-BYT User’s Manual 4.2 Install MBI Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\ECM-BYT_MBI. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to start installation.
ECM-BYT User’s Manual 4.3 Install TXE Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\ECM-BYT_TXE. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to continue installation.
ECM-BYT User’s Manual 4.4 Install VGA Driver Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \VGA\ECM-BYT. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next to continue installation. Step 2. Click Yes to accept license agreement. 68 ECM-BYT User’s Manual Step 3. Click Next.
ECM-BYT User’s Manual 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek\ALC892\ECM-BYT_Audio. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup.
ECM-BYT User’s Manual 4.6 Install Ethernet Driver (For Intel I211AT) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Gigabit\Intel\I211AT\ECM-BYT_LA N. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 1. Click Next. Step 2. Click Next to accept license agreement.
ECM-BYT User’s Manual 5.
ECM-BYT User’s Manual Unit: mm 72 ECM-BYT User’s Manual
ECM-BYT User’s Manual Unit: mm ECM-BYT User’s Manual 73
