ECM-QM77 Intel® Ivy Bridge Processors 3.5” Micro Module with Intel® QM77 Chipset User’s manual 4th Ed – 03 September 2013 Copyright Notice Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
ECM-QM77 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
ECM-QM77 If you still cannot find the answer, gather all the information or questions that apply to your problem, and with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the support you need to get the most from your Avalue’s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue’s engineers every business day.
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
ECM-QM77 Content 1. Getting Started ........................................................................................................... 9 1.1 Safety Precautions ................................................................................................ 9 1.2 Packing List ........................................................................................................... 9 1.3 Document Amendment History ............................................................................ 10 1.
2.5 User’s Manual Audio / USB Daughter Board User’s Guide ......................................................... 35 2.5.1 Jumper and Connector Layout ................................................................................................ 35 2.5.2 Jumper and Connector List ..................................................................................................... 35 2.5.3 Setting Jumper and Connector ................................................................................
ECM-QM77 3.6.3.1.1.1 PCI Express Root Port 1 ................................................................................... 63 3.6.3.1.1.2 PCI Express Root Port 6 ................................................................................... 64 3.6.3.1.1.3 PCI Express Root Port 7(82574 LAN) ............................................................... 65 3.6.3.1.2 USB Configuration ........................................................................................... 66 3.6.3.1.
User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
ECM-QM77 1.
User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology ECM-QM77 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with ECM-QM77 series or change the standard configurations.
ECM-QM77 1.5 System Specifications System Intel® rPGA988B（Socket G2）supports Intel® Ivy Bridge Processors （35 ～ 45W CPU BIOS CPU） AMI uEFI BIOS, 64Mbit SPI Flash ROM iAMT8.0 Supported System Chipset Intel® QM77 Chipset I/O Chip Nuvoton NCT6776F System Memory Watchdog Timer H/W Status Monitor Expansion TPM One 204-pin DDR3 SODIMM Socket Supports Up to 8GB DDR3 1333/ 1600 SDRAM Reset: 1sec. ~ 255sec./min. and 1sec. or 1min.
User’s Manual Power Requirement +12V ACPI Power Type Operating Temp. Storage Temperature Single Power ATX Support S0, S1, S3, S4, S5 ACPI 3.0 Compliant AT/ATX 0 ~ 60°C (32 ~ 140°F) -40 ~ 75°C (-40 ~ 167°F) Operating Humidity 0%~90% Relative Humidity, Non-condensing Size (L x W) Weight 5.7" x 4" (146mm x 101mm) 0.44lbs (0.
ECM-QM77 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of ECM-QM77.
User’s Manual 2.
ECM-QM77 2.
User’s Manual ECM-QM77 User’s Manual 17
ECM-QM77 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
User’s Manual 2.2.1 Main Memory ECM-QM77 provides one 204-pin DDR3 SODIMM socket, supports up to 8GB DDR3 1333/1600 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Keep away of touching its connectors. Align the notch key on the module with the rib on the slot.
ECM-QM77 To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module. Note: (1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase your system’s performance without acquiring technical information in advance. (2) Static electricity can damage the electronic components of the computer or optional boards.
User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
ECM-QM77 Connectors Label Function Note BAT1 Battery connector 2 x 1 wafer, pitch 1.25 mm COM1 Serial port 1 connector D-sub 9-pin, male CPU_FAN1 CPU fan connector 4 x 1 wafer, pitch 2.54 mm HDMI1 HDMI connector J422/1 COM 1 RS-422-485 mode 3 x 2 header, pitch 2.00 mm JAUDIO1 Audio connector 6 x 2 header, pitch 2.00 mm JBKL1 LCD inverter connector 5 x 1 wafer, pitch 2.00 mm JCOM2 Serial port 2 connector 5 x 2 header, pitch 2.
User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS * Default 2.4.
ECM-QM77 2.4.3 AT/ ATX Input power select (JAT1) AT* ATX * Default 2.4.
User’s Manual 2.4.5 2.4.6 Battery connector (BAT1) Signal PIN +3.
ECM-QM77 2.4.7 2.4.
User’s Manual 2.4.9 Audio connector (JAUDIO1) Signal PIN PIN Signal GND 11 12 MIC1-JD LINE1-JD 9 10 FRONT-JD MIC1-L-IN 7 8 MIC1-R-IN LINE1-L-IN 5 6 LINE1-R-IN GND 3 4 GND FRONT-L-OUT 1 2 FRONT-R-OUT 2.4.9.
ECM-QM77 2.4.10 2.4.11 LCD inverter connector (JBKL1) Signal PIN +12V 1 GND 2 BKLEN 3 BRIADJ 4 +5V 5 Signal PIN +5V 1 BRIGHT 2 GND 3 LCD backlight brightness adjustment (JVR1) Variation Resistor (Recommended: 4.
User’s Manual 2.4.12 Low pin count connector (JLPC1) Signal 2.4.13 PIN PIN Signal LPC_AD0 1 2 +3.
ECM-QM77 2.4.14 General purpose I/O connector (JDIO1) Signal PIN PIN Signal GND 11 12 GND SMB_DATA_9555 9 10 SMB_CLK_9555 DIO_GP13 7 8 DIO_GP23 DIO_GP12 5 6 DIO_GP22 DIO_GP11 3 4 DIO_GP21 DIO_GP10 1 2 DIO_GP20 2.4.
User’s Manual 2.4.16 SPI connector (JSPI1) Signal PIN PIN Signal 7 HOLD# SPI_SI 6 5 SPI_SO SPI_CLK 4 3 SPI_CS0# GND 2 1 +3.3V 2.4.
ECM-QM77 2.4.
User’s Manual 2.4.19 On-board box header for USB3.0 (JUSB3/1) Signal PIN PIN Signal +5V 1 USB3_RXN3_L 2 19 +5V USB3_RXP3_L 3 18 USB3_RXN4_L GND 4 17 USB3_RXP4_L USB3_TXN3_L 5 16 GND USB3_TXP3_L 6 15 USB3_TXN4_L GND 7 14 USB3_TXP4_L USB_PN_Z_2 8 13 GND USB_PP_Z_2 9 12 USB_PN_Z_3 NC 10 11 USB_PP_Z_3 2.4.20 On-board box header for USB2.
ECM-QM77 2.4.21 PS/2 keyboard & mouse connector (JKB/ MS1) Signal PIN PIN Signal KBCK 1 2 KBDT KBVCC 3 4 GND MSCK 5 6 MSDT 2.4.
User’s Manual 2.5 Audio / USB Daughter Board User’s Guide 2.5.1 Jumper and Connector Layout 2.5.2 Jumper and Connector List Connectors Label Function Note AUSB2 USB connector 2.0 AUSB3 USB connector 3.0 MIC1 Mic in connector Phone Jack LINEOUT1 Line out connector Phone Jack LINEIN1 Line in connector Phone Jack AJAUDIO1 Audio connector 6 x 2 header, pitch 2.00mm AJUSB2 2.00mm USB connector 5 x 2 header, pitch 2.00mm AJUSB3 2.00mm USB connector 10 x 2 header, pitch 2.
ECM-QM77 2.5.3 Setting Jumper and Connector Audio Connector (AJAUDIO1) Signal PIN PIN 2.00mm USB Connector (AJUSB2) Signal Signal PIN PIN Signal AFRONT1-L-OUT 1 2 AFRONT1-R-OUT USB2VCC 1 2 USB2VCC GND 3 4 GND AUSB_PN2 3 4 AUSB_PN1 ALINE1-L-IN 5 6 ALINE1-R-IN AUSB_PP2 5 6 AUSB_PP1 AMIC1-L-IN 7 8 AMIC1-R-IN GND 7 8 GND ALINE1-JD 9 10 AFRONT1-JD GND 9 10 GND GND 11 12 AMIC1-JD 2.
User’s Manual 2.6 Installing the CPU 2.6.1 Locate the CPU socket on the board. Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left.
ECM-QM77 2.6.2 Separate CPU cooler and its base first by screw drawer 1.
User’s Manual 2. turn the CPU lock clockwise to lock CPU The CPU fits in only one correct orientation.
ECM-QM77 3.
User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it.
ECM-QM77 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the CMOS settings which resets your system to its defaults.
ECM-QM77 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock.
User’s Manual 3.6.1.1 System Language This option allows choosing the system default language. 3.6.1.2 System Date Use the system date option to set the system date. Manually enter the day, month and year. 3.6.1.3 System Time Use the system time option to set the system time. Manually enter the hours, minutes and seconds. Note: The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. Visit the Avalue website (www.avalue.com.
ECM-QM77 3.6.2.1 APCI Settings Item APCI Sleep State S3 Video Repost Options Suspend Disabled S1 only(CPU Stop Clock) S3 only(Suspend to RAM)[Default] Disabled[Default] Enabled 3.6.2.2 S5 RTC Wake Settings 46 ECM-QM77 User’s Manual Description Select ACPI sleep state the system will enter when the SUSPEND button is pressed. Enable or Disable S3 Video Repost.
User’s Manual Item Options Wake system with Fixed Time Disabled[Default], Enabled Wake system with Dynamic Time Disabled[Default], Enabled Description Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified. Enable or disable System wake on alarm event. When enabled, System will wake on the current time + Increase minute(s). 3.6.2.
ECM-QM77 3.6.2.4 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
User’s Manual 3.6.2.5 SATA Configuration It allows you to select the operation mode for SATA controller. Item SATA Controller(s) SATA Mode Selection SATA Test Mode Options Enabled[Default] Disabled IDE[Default] AHCI RAID Enabled Disabled[Default] Description Enable or disable SATA Device. Determines how SATA controller(s) operate. Enable or disable Test Mode. 3.6.2.
ECM-QM77 Item Automatic Thermal Reporting Active Trip Point 0 Fan Speed Active Trip Point 1 Active Trip Point 1 Fan Speed Passive TC1 Value Passive TC2 Value Passive TSP Value PCH Thermal Device PCH Temp Read CPU Energy Read CPU Temp Read Description Configure _CRT, _PSV and _AC0 automatically based on values recommended Disabled, in BWG’s Thermal Reporting for Thermal Enabled[Default] Management settings. Set to Disabled for manual configuration. Active Trip Point 0 Fan Speed in percentage.
User’s Manual Alert Enable Lock PCH Alert DIMM Alert Disabled, Enabled[Default] Disabled[Default], Enabled Disabled[Default], Enabled Lock all Alert Enable settings PCH Alert pin enable DIMM Alert pin enable 3.6.2.7 Intel(R) Rapid Start Technology 3.6.2.
ECM-QM77 3.6.2.9 PCH-FW Configuration Item MDES BIOS Status Code Firmware Update Configuration Options Description Disabled[Default] Enable/Disable MDES BIOS Status Code. Enabled Configure Management Engine Technology Parameters. Item Me FW Image Re-Flash 52 ECM-QM77 User’s Manual Options Disabled[Default] Enabled Description Enable/Disable Me FW Image Re-Flash function.
User’s Manual 3.6.2.
ECM-QM77 3.6.2.11 AMT Configuration Intel AMT allows hardware-based remote management, security, power-management, and remote-configuration features. Item Intel AMT BIOS Hotkey Pressed MEBx Selection Screen Hide Un-Configure ME Confirmation MEBx Debug Message Output Un-configure ME Amt Wait Timer Disable ME ASF Active Remote Assistance Process Options Description Enable/Disable Intel ® Active Management Technology BIOS Extension. Note: iAMT H/W Enabled[Default] is always enabled.
User’s Manual 3.6.2.12 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. Item Options Legacy USB Support Enabled[Default] Disabled Auto USB3.
ECM-QM77 3.6.2.13 Super IO Configuration You can use this item to set up or change the Super IO configuration for serial ports. Please refer to 3.6.2.13.1 and 3.6.2.13.2 for more information.
User’s Manual 3.6.2.13.1 Serial Port 0 Configuration Item Serial Port Change Settings UART 232 422 485 Option Enabled, Disabled[Default] Auto[Default] IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 UART 232[Default], UART 422, UART 485 Description Enable or Disable Serial Port (COM) Select an optimal setting for Super IO device.
ECM-QM77 3.6.2.13.2 Serial Port 1 Configuration Item Serial Port Change Settings 58 ECM-QM77 User’s Manual Option Enabled, Disabled[Default] Description Enable or Disable Serial Port (COM) Auto[Default] IO=2F8h; IRQ=3 IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 Select an optimal setting for super IO device.
User’s Manual 3.6.2.14 Hardware Monitor Displays system health status Item Description Smart Fan Function Enable or Disable Smart Fan. The following system temperature, fan speed and voltage are monitored.
ECM-QM77 3.6.2.15 Intel® Smart Connect Technology Item ISCT Configuration Description Enabled Disabled[Default] 3.6.2.16 CPU PPM Configuration 60 ECM-QM77 User’s Manual Enable/Disable ISCT Configuration.
User’s Manual Item EIST Turbo Mode CPU C3/6/7 Report Config TDP LOCK Long duration power limit Long duration maintained Short duration power limit ACPI T State 3.6.3 Option Description Enable or Disable Intel Speedstep. Disabled Turbo Mode. Enabled[Default] Enable or Disable CPU C3(ACPI C2)/6(ACPI C3)/7(ACPI C3) report to OS. Disabled[Default] Lock the Config TDP Control Enabled register. Long duration power limit in Watts, 0 means use factory default.
ECM-QM77 3.6.3.1 PCH-IO Configuration Item PCI Express Configuration USB Configuration PCH Azalia Configuration Intel 82579 LAN (PHY) Option Description PCI Express Configuration settings. USB Configuration settings. PCH Azalia Configuration settings. Disabled Enable or disable onboard NIC. Enabled[Default] Wake on LAN (PHY) Disabled Enabled[Default] Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.
User’s Manual 3.6.3.1.1 PCI Express Configuration Item PCI Express Root Port 1 PCI Express Root Port 6 PCI Express Root Port 7(82574 Lan) 3.6.3.1.1.1 Description PCI Express Root Port 1 Settings. PCI Express Root Port 6 Settings. PCI Express Root Port 7 Settings.
ECM-QM77 Item PCI Express Root Port 1 ASPM Support PCIe Speed Detect Non-Compliance Device 3.6.3.1.1.2 Option Disabled Enabled[Default] Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Disabled[Default] Enabled Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s-Force all links to L0s State: AUTO-BIOS auto configure: DISABLE-Disables ASPM. Select PCI Express port speed. Detect Non-Compliance PCI Express Device, If enable, it will take more time at POST time.
User’s Manual 3.6.3.1.1.3 PCI Express Root Port 7(82574 LAN) Item PCI Express Root Port 7 ASPM Support PCIe Speed Detect Non-Compliance Device Option Disabled Enabled[Default] Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Disabled[Default] Enabled Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s-Force all links to L0s State: AUTO-BIOS auto configure: DISABLE-Disables ASPM. Select PCI Express port speed.
ECM-QM77 3.6.3.1.2 USB Configuration Item XHCI Pre-Boot Driver xHCI Mode HS Port #1/#2/#3/#4 Switchable xHCI Streams EHCI1/2 USB Ports Per-Port Disable Control 66 ECM-QM77 User’s Manual Option Disabled Enabled[Default] Smart Auto[Default] Auto Enabled Disabled Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Disabled[Default] Enabled Description Enable or disable XHCI Pre-Boot Driver support. Mode of operation of xHCI controller.
User’s Manual 3.6.3.1.3 PCH Azalia Configuration Item Azalia HDMI codec Port C 3.6.3.2 Option Disabled Enabled[Default] Description Enable or disable internal HDMI codec Port for Azalia.
ECM-QM77 Item Option Disabled Enabled[Default] VT-d CHAP Device ( B0:D7:F0) Disabled[Default] Enabled Thermal Device ( B0:D4:F0) Memory Configuration GT – Power Management Control 3.6.3.2.1 Description Check to enable VT-d function on MCH. Enable or Disable SA CHAP Device. Enable or Disable SA Thermal Device. Memory Configuration Parameters. GT – Power Management Control Options.
User’s Manual 3.6.3.2.2 GT – Power Management Control Item Option RC6 (Render Standby) RC6+(Deep RC6) GT Overclocking Support Disabled[Default] Enabled Description Check to enable render standby support. Check to enable Deep RC6(RC6+) support. Enable or disable GT OverClocking Support.
ECM-QM77 3.6.3.3 Graphics Configuration Item Option Graphics Turbo IMON Current 14 ~31[Default] Primary Display Auto IGFX[Default] Internal Graphics GTT Size Aperture Size Auto[Default] Disabled Enabled 1MB 2MB[Default] [128MB] [256MB] [Default] [512MB] Description Graphics turbo IMON current values (14 -31) Select which of IGFX/PEG Graphics device should be Primary Display Or select SG for Switchable Gfx. Keep IGD enabled based on the setup options.
User’s Manual Primary IGFX Boot Display Spread Spectrum clock Chip ALS Support Active LFP CH7511 EDID Panel Option LVDS Back Light PWM LVDS Back Light PWM Frequency VBIOS Default[Default] CRT LVDS HDMI Off[Default] Hardware Software Disabled[Default] Enabled No LVDS eDP Port-A[Default] 1024x768 24/1[Default] 800x600 18/1 1024x768 18/1 1366x768 18/1 1024x600 18/1 1280x800 18/1 1920x1200 24/2 640x480 18/1 800x480 18/1 1920x1080 18/2 1280x1024 24/2 1440x900 18/2 1600x1200 24/2 1366x768 24/1 1920x108
ECM-QM77 3.6.4 Boot Item Setup Prompt Timeout Bootup NumLock State Quiet Boot Fast Boot GateA20 Active Option ROM Messages INT19 Trap Response Boot Option #1/2/3 CSM parameters 72 ECM-QM77 User’s Manual Option Description Number of seconds to wait for setup activation key. 1~ 65535 65535(0xFFFF) means indefinite waiting.
User’s Manual 3.6.4.1 CSM parameters Item Launch CSM Boot option filter Launch PXE OpROM policy Launch Storage OpROM policy Launch Video OpROM policy Other PCI device ROM priority Option Always[Default] Never UEFI and Legacy[Default] Legacy only UEFI only Do not launch UEFI only[Default] Legacy only Do not launch UEFI only[Default] Legacy only Do not launch[Default] UEFI only Legacy only UEFI OpROM[Default] Legacy OpROM Description This option controls if CSM will be launched.
ECM-QM77 3.6.
User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Exit Exit system setup after saving the changes. 3.6.6.2 Discard Changes and Exit Exit system setup without saving any changes.
ECM-QM77 3.6.6.3 Save Changes and Reset Reset the system after saving the changes. 3.6.6.4 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 3.6.6.5 Save Changes Save Changes done so far to any of the setup options. 3.6.6.6 Discard Changes Discard Changes done so far to any of the setup options. 3.6.6.
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
ECM-QM77 4.1 Install Chipset Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Driver_Chipset\Intel\ECM-QM77_INF. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next..
User’s Manual 4.2 Install ME Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Utility\ECM-QM77_ME Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to proceed setup.
ECM-QM77 Step 6. Click Finish to complete setup.
User’s Manual 4.3 Install USB 3.0 Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to\ Utility\ECM-QM77_USB3.0. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. If the warning message appears while the installation process, click Continue to go on. Step1.
ECM-QM77 4.4 Install VGA Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ VGA\ECM-QM77_VGA. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next. Step 4. Click Install. Step 1. Click Next to continue installation. Step 2.
User’s Manual Step 6. Click Finish to complete setup.
ECM-QM77 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Driver_Audio\Realtek\ALC892\ECM-QM77_Audio. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup.
User’s Manual 4.6 Install Ethernet Driver (For Intel 82579LM and 82574L) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to D:\ Driver_Gigabit\Intel\82579\ECM-QM77_LA N. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. Step 3. Click Next after choosing features to install. Step 4.
ECM-QM77 Step 6. Click Finish to complete the setup.
User’s Manual 5.
ECM-QM77 Unit: mm 88 ECM-QM77 User’s Manual
User’s Manual Unit: mm ECM-QM77 User’s Manual 89
