EMX-CDT Intel® Atom™ Cedar Trail Mini ITX Motherboard With Intel® D2550 Processor + NM10 Chipset Quick Installation Guide 2nd Ed – 6 July 2012 Copyright Notice Copyright 2011-2012 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EMX-CDT Quick Installation Guide Content 1. Getting Started ............................................................................................................ 3 1.1 Safety Precautions .......................................................................................... 3 1.2 Packing List .................................................................................................... 3 1.3 Specifications ....................................................................................
EMX-CDT Quick Installation Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EMX-CDT Quick Installation Guide 1.
EMX-CDT Quick Installation Guide 1 x 10 pin-headers can’t use in the same time) USB Parallel Port PS2 KB/MS DIO 8 x USB 2.0/1.
EMX-CDT Quick Installation Guide 2 Hardware Configuration 6 EMX-CDT Quick Installation Guide
EMX-CDT Quick Installation Guide 2.1 Product Overview 2.1.1 Main board layout 2.1.
EMX-CDT Quick Installation Guide 2.2 Setting Jumpers & Connectors 2.2.1 LVDS _PWR1 Pin No. Definition 1-2 5V 2-3 3.3V 1-2, Set JLVDS1 Pin1,2,5,6 VDDSAFE as 5V 2-3, Set JLVDS1 Pin1,2,5,6 VDDSAFE as 3.3V 2.2.2 20PIN ATXPWR 8 EMX-CDT Quick Installation Guide Pin No. Definition Pin No. Definition 1 +3.3V 2 +3.3V 3 GND 4 +5V 5 GND 6 +5V 7 GND 8 PWR OK 9 +5VSB 10 +12V 11 +3.
EMX-CDT Quick Installation Guide 2.2.3 JLVDS1 Pin No. Definition Pin No. Definition Pin No. Definition Pin No.
EMX-CDT Quick Installation Guide 2.3.4 JU1/ JU2 Pin No. Definition FUSB2 (USB7) 1-2 FUSB2 Enabled 2-3 MINIPCIE Disabled 2.2.5 Mini PCI-e WiFi Card (USB interface) Mini PCI-e Card Don’t use USB interface Mini PCI-e card Enabled in the Mini PCI-e slot Enabled Enabled JP1-JP4 Pin No. Definition 1-2 MINIPCIE 2-3 M-SATA 3-4 SATA2 When you want to use Wifi on MINIPCIE1 slot, please set up JP1-JP4 as 1-2. When you want to use M-SATA on MINIPCIE1 slot, please set up JP1-JP4 as 2-3.
EMX-CDT Quick Installation Guide 2.2.6 JIR1/ JIR2 Pin No. Definition 1-2 COM2 2-3 IR For COM2, please set up JIR1/ JIR2 as 1-2. For IR, please set up JIR1/ JIR2 as 2-3. 2.2.7 FPANEL1 Pin No. Definition Pin No.
EMX-CDT Quick Installation Guide 2.2.8 JVGA (The I/O VGA DB15 connector & 2 x 5 pin-headers can’t use in the same time) 2.2.9 Pin No. Definition Pin No. Definition 1 GND 2 R 3 GND 4 G 5 GND 6 B 7 HSYNC 8 VSYNC 9 DDC_DATA 10 DDC_CLK Pin No. Definition Pin No.
EMX-CDT Quick Installation Guide 2.2.10 2.2.11 JINVERT1 Pin No. Definition Pin No. Definition 1 12V 2 GND 3 BLEN 4 PWM 5 5V IRDA Only for specially used (Can’t send data) Pin No. Definition Pin No.
EMX-CDT Quick Installation Guide 2.2.12 FUSB1/FUSB2 Pin No. Definition Pin No. Definition 1 VCC 2 VCC 3 Data 0- 4 Data 1- 5 Data 0+ 6 Data 1+ 7 GND 8 GND 9 NC(CUT) 10 GND When JU1/JU2 jumpers are set to 2-3, FUSB2 (USB7) will be disabled. (Please refer to P.15 2.3.4 for more information.) 2.2.13 F_AUDIO 14 EMX-CDT Quick Installation Guide Pin No.
EMX-CDT Quick Installation Guide 2.2.14 2.2.15 JSPDIF1 Pin No. Definition 1 NC 2 GND 3 OUT JCOM1-6 Pin No. Definition Pin No.
EMX-CDT Quick Installation Guide 2.2.16 JCOM1-6 (9th Pin definition) COM1 to COM6 9th Pin definition 16 EMX-CDT Quick Installation Guide Pin No.
