EMX-H61B Intel® Core™/ Pentium®/ Celeron® Mini ITX Motherboard with Intel® H61 Express Chipset User’s Manual 1st Ed – 15 May 2013 Part No.
EMX-H61B User’s Manual Content 1. Getting Started ............................................................................................................ 4 1.1 Safety Precautions .......................................................................................... 4 1.2 Packing List .................................................................................................... 4 1.3 Document Amendment History....................................................................... 5 1.
EMX-H61B User’s Manual 3.6.1 Main Menu ............................................................................................ 29 3.6.1.1 System Language .......................................................................... 29 3.6.1.2 System Date .................................................................................. 29 3.6.1.3 System Time .................................................................................. 29 3.6.2 Advanced BIOS settings ..................................
EMX-H61B User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EMX-H61B User’s Manual 1.
EMX-H61B User’s Manual 1.4 Manual Objectives This manual describes in details Avalue Technology EMX-H61B Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to set up EMX-H61B series or change the standard configurations.
EMX-H61B User’s Manual 1.5 Specifications System CPU Intel® LGA1155 Socket Supports 2nd /3rd Generation Core™ i7/ i5/ i3, Pentium® and Celeron® Processors (Max. TDP at 65W) BIOS AMI uEFI BIOS, 64Mbit SPI Flash ROM System Chipset Intel® H61 Chipset I/O Chip ITE IT8728F 2 x 204-pin DDR3/DDR3L(Jumper Selectable) 1333/1600 SODIMMs, Up to 16 System Memory GB H/W Reset, 1sec. – 65535sec./min. 1sec. or 1min.
EMX-H61B User’s Manual 1 x 2 x 2 pin ATX power connector for DC +12~19V input 1 x 2 x 15 pin , pitch 1.00mm connector for LVDS 1 x 6 pin , pitch 2.00mm connector for Inverter 1 x 4 pin , pitch 2.
EMX-H61B User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-H61B.
EMX-H61B User’s Manual 2.
EMX-H61B User’s Manual 2.
EMX-H61B User’s Manual 12 EMX-H61B User’s Manual
EMX-H61B User’s Manual 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the DIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change BIOS settings to support flat panel. 4. Connect power supply to the board via the AC/DC Adapter. 5. Turn on the power. 6.
EMX-H61B User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
EMX-H61B User’s Manual DUSB1 USB connector Stack USB 2.00connector LAN1 RJ-45 Ethernet connector 1 RJ45 w/ indicator connector DCIN DC power-in connector JDCIN DC power-in connector 2 x 2 wafer , pitch 4.20 mm FPANEL Front Panel Switches 2 x 5 header, pitch 2.54 mm LVDS1 LVDS connector 2 x15 wafer, pitch 1.0 mm JSPEAK Speaker Headers 1 x 4 wafer, pitch 2.
EMX-H61B User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT) Normal* Clear CMOS * Default 2.4.
EMX-H61B User’s Manual 2.4.3 DDR3/DDR3L using (JDIMM) DDR3* DDR3L * Default 2.4.
EMX-H61B User’s Manual 2.4.5 LVDS Power connector (JLVDS_P) +5V* +3.3V Pin Define Max current 1-2 +3.3V 1A 2-3 +5V 1A Note: This jumper is working for LVDS1 VDD * Default power. 2.4.6 LVDS connector (LVDS1) Signal Note: Mapping connector CSI-1171-30 (1.0mm).
EMX-H61B User’s Manual 2.4.7 General Purpose I/O (JGPIO1) Signal 2.4.8 JCOM1 JCOM2 PIN PIN Signal +5V 1 2 12V GPO 3 4 GPI GPO 5 6 GPI GPO 7 8 GPI GPO 9 10 GPI GND 11 12 GND Serial port 1/2 connector (JCOM1/2) Signal PIN PIN Signal DCD 1 2 RXD TXD 3 4 RTD GND 5 6 DSR RTS 7 8 CTS RI 9 Note: COM 1/2 Pin9 without power.
EMX-H61B User’s Manual 2.4.9 2.4.
EMX-H61B User’s Manual 2.4.11 USB Connector 1/2 - USB2.0 (FUSB1/2) FUSB2 FUSB1 Signal 2.4.
EMX-H61B User’s Manual 2.4.13 DC power-in connector (JDCIN) Signal PIN PIN Signal GND 2 4 +12~19V GND 1 3 +12~19V Note: Suggest bundle with 19V power adapter. 2.4.14 Inverter connector (Inverter) PIN Signal Max current 1 +12V 1A 2 +12V 1A 3 BLK_ON 4 Brightness 5 GND 6 GND Note: Mapping connector PHR6.
EMX-H61B User’s Manual 2.4.15 SATA Power connector 1/2 (JSATA_P1/2) JSATA_P1 PP JSATA_P2 PP 2.4.16 PIN Signal Max current 1 +12V 1A 2 GND 3 GND 4 VCC Speaker Headers (JSPEAK) PIN Signal 1 INTSPL+ 2 INTSPL- 3 INTSPR+ 4 INTSPR- Note: Support 5W 8ΩX 2 speaker. Mapping connector PHR-4.
EMX-H61B User’s Manual 2.4.
EMX-H61B User’s Manual 3.
EMX-H61B User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The BIOS is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins the process of checking out the system and configuring it.
EMX-H61B User’s Manual 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
EMX-H61B User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the BIOS supports an override to the NVRAM settings which resets your system to its defaults.
EMX-H61B User’s Manual 3.6 BIOS setup Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Language Use this option to select system language 3.6.1.
EMX-H61B User’s Manual 3.6.2 Advanced BIOS settings This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.1 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
EMX-H61B User’s Manual 3.6.2.2 Onboard Device Configuration Item Onboard LAN1 Control Mini PCIE Control Launch PXE OpROM policy Launch Storage OpROM policy USB Control Options Disabled Enabled[Default] Disabled Enabled[Default] Disabled[Default] Enabled Disabled Enabled[Default] Disabled Enabled[Default] Onboard Audio Control Disabled Enabled Auto[Default] Intel HDMI codec Port C Disabled Enabled[Default] Description Enable or disable Onboard LAN1. Enable or disable Mini PCIE.
EMX-H61B User’s Manual 3.6.2.
EMX-H61B User’s Manual 3.6.2.4 Inter® Rapid Start Technology 3.6.2.5 Advanced Power Management Item Options ACPI Sleep State Suspend Disabled S1 only(CPU Stop Clock)[Default] S3 only(Suspend to RAM) Description Select ACPI sleep state the system will enter when the SUSPEND button is pressed.
EMX-H61B User’s Manual Wake on LAN Power-Loss State Poweron By RTC Disabled[Default] Enabled Power Off[Default] Power On Keep Last State Disabled[Default] Enabled Enable system to wake from S5 using LAN wake event. Specify what state to go to when power is re-applied after a power failure. Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified. 3.6.2.
EMX-H61B User’s Manual 3.6.2.6.1 Serial Port 0 Configuration Item Serial Port Change Settings 3.6.2.6.2 Option Disabled Enabled[Default] Auto[Default] IO=3F8h; IRQ=4; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Description Enable or Disable Serial Port (COM). Select an optimal setting for Super IO device.
EMX-H61B User’s Manual Item Serial Port Change Settings Option Disabled Enabled[Default] Auto[Default] IO=2F8h; IRQ=3; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Description Enable or Disable Serial Port (COM). Select an optimal setting for Super IO device. 3.6.2.7 HW Monitor The H/W Monitor shows the operating temperature, fan speeds and system voltages.
EMX-H61B User’s Manual 3.6.2.8 Watchdog Configuration Item Options Description Watchdog Count Mode Second[Default] Minute Watchdog Count Mode Selection. Watchdog TimeOut Value 0 to 255 Set Watchdog time, from 0 to 255. 3.6.2.
EMX-H61B User’s Manual Item Options Description Disabled Console Redirection Enable or Disable. Enabled[Default] The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. Console Redirection Console Redirection Settings 3.6.2.9.
EMX-H61B User’s Manual 3.6.3 Chipset Item Description SB Configuration PCH Parameters. NB Configuration NB Parameters. 3.6.3.
EMX-H61B User’s Manual Item Options SATA Mode Selection IDE[Default] AHCI IDE Legacy / Native Mode Native[Default] Legacy Selection Description Determines how SATA controller(s) operate. IDE Legacy / Native Mode Selection. 3.6.3.2 NB Configuration Item Options DVMT Pre-Allocated 32M/64M[Default]/96M/128M/ 160M/192M/224M/256M/288M /320M/352M/384M/416M/448 M/480M/512M/1024M DVMT Total Gfx Mem 128M/256M[Default]/MAX Select DVMT 5.0 Total Graphics Memory size used by the Internal Graphics Device.
EMX-H61B User’s Manual Backlight Control 3.6.4 1400x1050 24/2 1600x1200 24/2 1366x768 24/1 1680x1050 24/2 1920x1200 24/2 1440x900 18/2 1600x900 24/2 1024x768 24/1 1280x800 18/1 1920x1080 24/2 2048x1536 24/2 PWM Inverted[Default] PWM Normal Back Light Control Setting.
EMX-H61B User’s Manual 3.6.5 Security Use the Security menu to set system and user password. 3.6.5.1 Administrator Password This setting specifies a password that must be entered to access the BIOS Setup Utility. If only the Administrator's password is set, then this only limits access to the BIOS setup program and is only asked for when entering the BIOS setup program. By default, no password is specified. 3.6.5.
EMX-H61B User’s Manual 3.6.6 Save & Exit 3.6.6.1 Save Changes and Reset Any changes made to BIOS settings are stored in NVRAM. The setup program then exits and reboots the controller. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller.
EMX-H61B User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
EMX-H61B User’s Manual 4.1 Install Chipset Driver Insert the Supporting DVD-ROM to DVD-ROM drive, click on “start” icon and it should show the index page of Avalue’s products automatically. If not, locate the folder HTML and choose the product from the targeted folder. Note: The installation procedures and screen shots in this section are based on Windows 7 operating system. Step 1. Locate 「\Driver_Chipset\Intel\EMX-H61B_Chipset」. Step 4. Select Next to continue installation. Step 2.
EMX-H61B User’s Manual 4.2 Install VGA Driver Insert the Supporting DVD-ROM to DVD-ROM drive, click on “start” icon and it should show the index page of Avalue’s products automatically. If not, locate the folder HTML and choose the product from the targeted folder. Note: The installation procedures and screen shots in this section are based on Windows 7 operating system. Step 1. Locate 「\VGA\EMX-H61B_VGA」. Step 4. Select Next to continue installation. Step 5. Select Next to continue installation.
EMX-H61B User’s Manual 4.3 Install LAN Driver (For Realtek 8111E Gigabit Ethernet) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Gigabit\Realtek\RTL8111E\EMX-H61B _LAN. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. Step 3. Click Finish to complete setup. Step 1. Click Next to Install.
EMX-H61B User’s Manual 4.4 Install ME Driver Insert the Supporting DVD-ROM to DVD-ROM drive, click on “start” icon and it should show the index page of Avalue’s products automatically. If not, locate the folder HTML and choose the product from the targeted folder. Note: The installation procedures and screen shots in this section are based on Windows 7 operating system. Step 1. Locate 「\Utility\EMX-H61B_ME_5M_Driver_Production」. Step 2. Select Next to start setup. Step 3. Select Yes to the next step.
EMX-H61B User’s Manual Step 7.
EMX-H61B User’s Manual 4.5 Install Audio Driver (For Realtek ALC661 HD Audio) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\EMX-H61B_Audio\R2.66 Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. If the warning message appears while the installation process, click Continue to go on.
EMX-H61B User’s Manual 5.
EMX-H61B User’s Manual Unit: mm 52 EMX-H61B User’s Manual
EMX-H61B User’s Manual Unit: mm EMX-H61B User’s Manual 53
EMX-H61B User’s Manual Unit: mm 54 EMX-H61B User’s Manual