EMX-H61B Intel® Core™/ Pentium®/ Celeron® Mini ITX Motherboard with Intel® H61 Express Chipset Quick Installation Guide 1st Ed – 30 April 2013 Part No.
EMX-H61B Quick Installation Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EMX-H61B Quick Installation Guide 2.
EMX-H61B Quick Installation Guide 2.
EMX-H61B Quick Installation Guide EMX-H61B Quick Installation Guide 5
EMX-H61B Quick Installation Guide 2.2 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
EMX-H61B Quick Installation Guide DUSB1 USB connector Stack USB 2.00connector LAN1 RJ-45 Ethernet connector 1 RJ45 w/ indicator connector DCIN DC power-in connector JDCIN DC power-in connector 2 x 2 wafer , pitch 4.20 mm FPANEL Front Panel Switches 2 x 5 header, pitch 2.54 mm LVDS1 LVDS connector 2 x15 wafer, pitch 1.0 mm JSPEAK Speaker Headers 1 x 4 wafer, pitch 2.
EMX-H61B Quick Installation Guide 2.3 Setting Jumpers & Connectors 2.3.1 Clear CMOS (JBAT) Normal* Clear CMOS * Default 2.3.
EMX-H61B Quick Installation Guide 2.3.3 DDR3/DDR3L using (JDIMM) DDR3* DDR3L * Default 2.3.
EMX-H61B Quick Installation Guide 2.3.5 LVDS Power connector (JLVDS_P) +5V* +3.3V Pin Define Max current 1-2 +3.3V 1A 2-3 +5V 1A Note: This jumper is working for LVDS1 VDD * Default power. 2.3.6 LVDS connector (LVDS1) Signal Note: Mapping connector CSI-1171-30 (1.0mm).
EMX-H61B Quick Installation Guide 2.3.7 General Purpose I/O (JGPIO1) Signal 2.3.8 JCOM1 JCOM2 PIN PIN Signal +5V 1 2 12V GPO 3 4 GPI GPO 5 6 GPI GPO 7 8 GPI GPO 9 10 GPI GND 11 12 GND Serial port 1/2 connector (JCOM1/2) Signal PIN PIN Signal DCD 1 2 RXD TXD 3 4 RTD GND 5 6 DSR RTS 7 8 CTS RI 9 Note: COM 1/2 Pin9 without power.
EMX-H61B Quick Installation Guide 2.3.9 2.3.
EMX-H61B Quick Installation Guide 2.3.11 USB Connector 1/2 - USB2.0 (FUSB1/2) FUSB2 FUSB1 Signal 2.3.
EMX-H61B Quick Installation Guide 2.3.13 DC power-in connector (JDCIN) Signal PIN PIN Signal GND 2 4 +12~19V GND 1 3 +12~19V Note: Suggest bundle with 19V power adapter. 2.3.14 Inverter connector (Inverter) PIN Signal Max current 1 +12V 1A 2 +12V 1A 3 BLK_ON 4 Brightness 5 GND 6 GND Note: Mapping connector PHR6.
EMX-H61B Quick Installation Guide 2.3.15 SATA Power connector 1/2 (JSATA_P1/2) JSATA_P1 PP JSATA_P2 PP 2.3.16 PIN Signal Max current 1 +12V 1A 2 GND 3 GND 4 VCC Speaker Headers (JSPEAK) PIN Signal 1 INTSPL+ 2 INTSPL- 3 INTSPR+ 4 INTSPR- Note: Support 5W 8ΩX 2 speaker. Mapping connector PHR-4.
EMX-H61B Quick Installation Guide 2.3.
