EMX-Q87R Intel® LGA1150 Socket Supports 4th Generation Core™ Refresh i7/i5/i3, Pentium® and Celeron® Processors Mini ITX Motherboard with Intel® Q87 Express Chipset User’s Manual 1st Ed – 23 January 2015 Part No: E2047M87R00R
EMX-Q87R User’s Manual FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
EMX-Q87R User’s Manual Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF Avalue Technology Inc. As used herein: 1.
EMX-Q87R User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
EMX-Q87R User’s Manual Contents 1. Getting Started .............................................................................................................. 7 1.1 Safety Precautions ...................................................................................................... 7 1.2 Packing List ................................................................................................................. 7 1.3 Document Amendment History .......................................................
EMX-Q87R User’s Manual 2.7.12 LVDS Connector (JLVDS1) ............................................................................... 36 2.7.13 Back Light Controller Connector (JBKL1) ......................................................... 36 2.7.14 2.7.15 2.7.16 2.7.17 2.7.18 2.7.19 2.7.20 2.7.21 2.7.22 Front Panel Connector (F_PANEL) ................................................................... 37 Fan Connectors (CPU_FAN1, SYS_FAN1) ......................................................
EMX-Q87R User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
EMX-Q87R User’s Manual 1.3 Document Amendment History Revision 1 st Date February 2015 Comment Initial Release This manual describes the Avalue Technology EMX-Q87R Single Board. We have tried to include as much information as possible but have not duplicated information that is provided in the standard IBM Technical References, unless proven to be necessary to aid in the understanding of this board.
EMX-Q87R User’s Manual 1.4 System Specifications System ® CPU th Intel LGA1150 Socket supports 4 Generation Core™ Refresh i7/i5/i3, Pentium ® and Celeron Processors (Max. TDP at 95W) BIOS AMI uEFI BIOS, 64 Mbit SPI Flash ROM, iAMT 9.0 supported System Chipset Intel Q87 Express Chipset I/O Chipset Nuvoton NTC6106D Memory ® 2 x 204-Pin SO-DIMM sockets supports DDR3 1600/1333MHz up to 16GB Dual Channel Watchdog Timer Reset: 1 sec.~ 65535 sec./min and 1 sec. or 1 min.
EMX-Q87R User’s Manual 1 x HDMI 2 x RJ45 LAN Port 6 x USB 3.0 6 x USB 2.0 1 x 3 Audio Jacks (Line-in/ Line-out/ Mic-in) Internal I/O Connector 4 x SATAIII connectors (RAID 0, 1, 5, 10 supported) 3 x USB connectors support additional 6 x USB 2.0 ports 3 x COM header (RS-232 supported, COM2 +5V&+12V supported, selected by jumper.) 1 x CPU Fan connector 1 x System Fan connector Internal I/O 1 x Chassis Intrusion header 1 x Front Audio connector 1 x Front panel header 1 x USB 3.0 Connector support 2 x USB 3.
EMX-Q87R User’s Manual 1.5 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EMX-Q87R.
EMX-Q87R User’s Manual 2. Hardware Installation 2.1 Product highlights 2.1.1 Product Overview Supports latest Intel LGA 1150 CPU-socket interface processor, the 4th Generation Intel® Core i7/i5/i3 Haswell desktop processors which are built on 22 nm technologies to provide smart performance and responsiveness on executing tasks, It combines the CPU and GPU to offer fantastic HD media and graphics, especially on 3D gaming experience.
EMX-Q87R User’s Manual 2.1.3 Key Architecture Features •Supports Intel LGA 1150 CPU, the 4th Generation Intel® Core i3, i5, i7 desktop processors. -22nm monolithic die -Integrated Gfx Intel® HD Graphics 4600 (GT2) & memory controller -4 &2 Cores, up to 8MB LLC -HW accelerated video CODECs - Compatible with high speed DDR3-1600 -PCIe* (CPU): Gen 3.0, 8GT/s, up to 20 lanes (4 ctls)** -TDP: 35W-65W (22nm Haswell Platform) • Intel® Turbo Boost Technology 2.
EMX-Q87R User’s Manual Watchdog timer • Power Management - Dual Dynamic Power Management Separate power planes for cores and memory controller - Advanced Configuration and Power Interface (ACPI) 5.0 Before you Proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component.
EMX-Q87R User’s Manual 2.2 Motherboard Overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Refer to the chassis documentation before installing the motherboard. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 2.2.
EMX-Q87R User’s Manual 2.2.
EMX-Q87R User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
EMX-Q87R User’s Manual JLVDS1 LVDS Connector DP1 Display Port KBMS1 PS/2 Keyboard & Mouse Connector ATXPWR1 20pin ATX Power Connector ATX12V1 12V ATX Power Connector COM1 Serial Port 1 Connector (Support RS422/RS485) COM2~4 Serial Port 2~4 Connectors LPC1 LPC Connector F_PANEL Front Panel Connector CPU_FAN1 CPU Fan Connector SYS_FAN1 System Fan Connector JCASE1 Chassis Intrusion Connector SATA1~4 Serial ATA Connector USB56/78/910/1112 Front USB Header JBKL1 Back Light Controller
EMX-Q87R User’s Manual 2.4 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1150 socket designed for the Intel® Core™ i7/ i5/ i3 processor in the 1150-land package. Your boxed Intel® Core™ i7/ i5/ i3 LGA1150 processor package should come with installation instructions for the CPU, fan and heatsink assembly. If the instructions in this section do not match the CPU documentation, follow the latter.
EMX-Q87R User’s Manual 2.4.1 Installing the CPU 1. Locate the CPU socket on the motherboard. Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A Load lever B To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.
EMX-Q87R User’s Manual 3. Lift the Load lever with your thumb and forefinger to around 180º angle (A), then pull the PnP cap from the CPU socket to remove (B). B A 4. Position the CPU over the socket, making sure that the gold triangle is on the top-left corner of the socket then fit the socket alignment key into the CPU notch. Gold triangle CPU notch Alignment key 5. Pull back the load lever , then push the load lever (A) until it snaps into the retention tab.
EMX-Q87R User’s Manual 2.4.2 Installing the CPU Heatsink and Fan Intel® Core™ i7/ i5/ i3 LGA1150 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Install the motherboard to the chassis before you install the CPU fan and heatsink assembly. When you buy a boxed Intel® Core™ i7/ i5/ i3 LGA1150 processor, the package includes the CPU fan and heatsink assembly.
EMX-Q87R User’s Manual 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. A B A B B A B A 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. FAN 1 CPU FAN Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. 2.4.
EMX-Q87R User’s Manual 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. A A B B B A B A 4. Carefully remove the heatsink and fan assembly from the motherboard.
EMX-Q87R User’s Manual 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. 2.5 System Memory 2.5.1 Overview The motherboard comes with two 204-pin Double Data Rate 3 (DDR3) Dual Inline Memory Modules (SODIMM) sockets. A DDR3 module has the same physical dimensions as a DDR SODIMM but has a 204-pin footprint compared to the 240-pin DDR2 DIMM. DDR3 SODIMMs are notched differently to prevent installation on a DDR2 SODIMM socket.
EMX-Q87R User’s Manual Channel Socket Channel A Channel B DIMMA1 DIMMB1 2.5.2 Memory Configurations You may install 2 GB, 4 GB , and 8 GB unbuffered ECC or non-ECC DDR3 SODIMMs into the SODIMM sockets using the memory configurations in this section. IF you installed two 2GB memory modules, the system may detect less than 4GB of total memory because of address space allocation for other critical functions.
EMX-Q87R User’s Manual A DDR3 SODIMM is keyed with a notch so that it fits in only one direction. DO NOT force a SODIMM into a socket to avoid damaging the DIMM. The DDR3 SODIMM sockets do not support DDR/DDR2 SODIMMs. DO NOT install DDR/DDR2 SODIMMs to the DDR3 SODIMM socket. 2.5.4 Removing a DDR3 SODIMM 1. Press the two ejector tabs on the slot outward simultaneously, and then pull out the DIMM module.
EMX-Q87R User’s Manual Support the DIMM lightly with your fingers when pressing the ejector tabs. The DIMM might get damaged when it flips out with extra force. 2.6 Expansion Card In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 2.6.
EMX-Q87R User’s Manual 2.6.2.2 MiniPCI express slot The miniPCIe express slot supports Mini cards for WiFi , Bluetooth, COM, USB modules, and other cards that comply with the mini Card Rev. 1.2 specifications . The figure below shows the type of full size SSD card that can be installed on a miniPCI express slot.
EMX-Q87R User’s Manual 2.7 Setting Jumpers & Connectors 2.7.1 Clear CMOS Jumper (JCMOS1) Normal* Clear CMOS *Default 2.7.
EMX-Q87R User’s Manual 2.7.3 COM2 Ring-In/ +12V/ +5V Select (JCOMPWR1) RI* +12V +5V * Default 2.7.
EMX-Q87R User’s Manual 2.7.5 LCD Inverter Setting Connector (JLVDS_BKL1) 5V(Pin 1~3)* Linear mode(Pin 2~4)* 3.3V(Pin 3~5)* PWM mode(Pin 4~6) *Default 2.7.
EMX-Q87R User’s Manual 2.7.7 20pin ATX Power Connector (EATXPWR1) 2.7.
EMX-Q87R User’s Manual 2.7.
EMX-Q87R User’s Manual 2.7.10 Serial Port 2 Connector (COM2) 2.7.
EMX-Q87R User’s Manual 2.7.12 LVDS Connector (JLVDS1) 2.7.
EMX-Q87R User’s Manual 2.7.14 Front Panel Connector (F_PANEL) 2.7.
EMX-Q87R User’s Manual 2.7.16 SATA Ports (SATA1~4) SATA1 SATA2 SATA3 SATA4 2.7.17 USB 3.
EMX-Q87R User’s Manual 2.7.18 Front USB Headers (USB56, USB78, USB910) USB910 USB56 USB78 2.7.
EMX-Q87R User’s Manual 2.7.20 Amplifier Connector (JAMP1) 2.7.
EMX-Q87R User’s Manual 2.7.22 LPC Connector (JLPC1) 2.7.
EMX-Q87R User’s Manual 3. BIOS Setup 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The BIOS is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins checking the system and configuring it.
EMX-Q87R User’s Manual 3.3 Using Setup The keys in the legend bar allow you to navigate through the various setup menus Button Description Select Screen Select Item +- Change Option / Field Enter Select PGUP/HOME Go to Top of Screen PGDN/HOME Go to Bottom of Screen F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F2 Previous Values F3 Optimized defaults F4 Save & Exit Setup ESC Exit List Box This box appears only in the opening screen.
EMX-Q87R User’s Manual 3.4 BIOS Menu Screen When you enter the BIOS, the following screen appears. The BIOS menu screen displays the items that allow you to make changes to the system configuration. To access the menu items, press the up/down/right/left arrow key on the keyboard until the desired item is highlighted, then press [Enter] to open the specific menu.
EMX-Q87R User’s Manual 3.4.1 Main Setup This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. Use this menu for basic system configurations, such as time, date etc. BIOS Information Displays the auto-detected BIOS information. System Date The date format is ,,,. System Time The time format is ,,.
EMX-Q87R User’s Manual 3.4.2 Advanced BIOS Setup Select the Advanced tab from the setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Chipset configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below.
EMX-Q87R User’s Manual 3.4.2.1 PCI Subsystem Setting The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
EMX-Q87R User’s Manual 3.4.2.2 ACPI Settings ACPI Sleep State [S3 only (Suspend to RAM)] Select the highest ACPI sleep state the system will enter the SUSPEND button is press. Configuration options: [Suspend Disable] [S3 (suspend to RAM )] Erp Function [Disabled] Configuration options: [Disabled] [Enabled] Restore AC Power Loss [Power Off] Specify what state to go to when power is re-applied after a power failure(G3 state).
EMX-Q87R User’s Manual 3.4.2.
EMX-Q87R User’s Manual Active Processor Cores [All] Select the numbers of cores in each processor package. Configuration options: [All] [1] [2] [3] [4] [5] [6] [7] It depends on each CPU type. Intel Virtualization Technology [Enabled] When enable, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Configuration options: [Disabled] [Enabled] EIST [Enabled] Enable or disable speed step.
EMX-Q87R User’s Manual CPU C3 Report [Enabled] Use this to enable or disable CPU C3 report to OS. Configuration options: [Disabled] [Enabled] CPU C6 Report [Enabled] Use this to enable or disable CPU C6 report to OS. Configuration options: [Disabled] [Enabled] CPU C7 Report [CPU C7s] Use this to enable or disable CPU C7 report to OS. Configuration options: [Disabled] [CPU C7] [CPU C7s] Package C State limit [Auto] Intel TXT(LT) Support [Enable] Configuration options: [Disabled] [Enabled] 3.4.2.
EMX-Q87R User’s Manual Configuration options: [Disabled] [Enabled] SATA Mode [IDE] Support IDE, AHCI or RAID mode Configuration options: [IDE][AHCI][RAID] 3.4.2.
EMX-Q87R User’s Manual 3.4.2.
EMX-Q87R User’s Manual 3.4.2.7 USB Configuration USB Configuration Parameters USB Device Display how many devices are connected. Legacy USB Support [Enabled] Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. Disabled option will keep USB devices available only for EFI applications.
EMX-Q87R User’s Manual 3.4.2.8 NCT6106D Super IO Configuration System Super IO Chip Parameters.
EMX-Q87R User’s Manual 3.4.2.8.1 Serial Port 1 configuration Set Parameters of Serial Port 1 Serial Port 1 Configuration Serial Port [Enabled] Enable or Disable Serial Port. Configuration options: [Disabled] [Enabled] Device Setting [IO=3F8h; IRQ=4] Change Setting[Auto] Select an optimal setting for Super IO device.
EMX-Q87R User’s Manual 3.4.2.8.2 Serial Port 2 configuration Set Parameters of Serial Port 2 Serial Port 2 Configuration Serial Port [Enabled] Enable or Disable Serial Port. Configuration options: [Disabled] [Enabled] Device Setting [IO=2F8h; IRQ=3] Change Setting[Auto] Select an optimal setting for Super IO device.
EMX-Q87R User’s Manual 3.4.2.8.3 Serial Port 3 configuration Set Parameters of Serial Port 3 Serial Port 3 Configuration Serial Port [Enabled] Enable or Disable Serial Port. Configuration options: [Disabled] [Enabled] Device Setting [IO=3E8h; IRQ=5] Change Setting[Auto] Select an optimal setting for Super IO device.
EMX-Q87R User’s Manual 3.4.2.8.4 Serial Port 4 configuration Set Parameters of Serial Port 4 Serial Port 4 Configuration Serial Port [Enabled] Enable or Disable Serial Port. Configuration options: [Disabled] [Enabled] Device Setting [IO=2E8h; IRQ=10] Change Setting[Auto] Select an optimal setting for Super IO device.
EMX-Q87R User’s Manual 3.4.2.
EMX-Q87R User’s Manual 3.4.2.9.
EMX-Q87R User’s Manual 3.4.2.9.
EMX-Q87R User’s Manual 3.4.2.
EMX-Q87R User’s Manual 3.4.2.
EMX-Q87R User’s Manual 3.4.
EMX-Q87R User’s Manual 3.4.3.1 PCH-IO Configuration PCH-IO Configuration LAN1 Controller [Enabled] Enable/Disable LAN1 Controller Configuration options: [Disabled] [Enabled] LAN1 Option-ROM [Disabled] Enable/Disable LAN1 boot option for legacy network devices.
EMX-Q87R User’s Manual LAN2 Option-ROM [Disabled] Enable/Disable LAN2 boot option for legacy network devices. Configuration options: [Disabled] [Enabled] Amplifier GAIN(db) [15.3db] Setting Amplifier GAIN Configuration options:[15.3db][21.2db][27.2db][31.8db] 3.4.3.1.
EMX-Q87R User’s Manual PCI Express Root Port 1 [Enabled] Configuration options: [Disabled] [Enabled] ASPM Support [Disabled] Configuration options:[Disabled][L0s] [L1] [L0sL1][Auto] PCIe Speed [Auto] Configuration options: [Auto][Gen1][Gen2] Detect Non-Compliance Device [Disabled] Configuration options: [Disabled] [Enabled] 68 EMX-Q87R User’s Manual
EMX-Q87R User’s Manual 3.4.3.1.2 USB Configuration USB3.0 Support [Enabled] Enable/Disable USB 3.
EMX-Q87R User’s Manual 3.4.3.
EMX-Q87R User’s Manual 3.4.3.2.1 Graphics Configuration Primary Display [AUTO] Select which of IGFX/PEG Graphics device should be Primary Display or select SG for Switchable Gfx. Configuration options: [AUTO][IGFX][PEG] Internal Graphics [Auto] Configuration options: [Auto] [Disabled][Enabled] DVMT Pre-Allocated [32M] Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by graphics device. Configuration options: [32M]~[512M] the internal DVMT Total Gfx Mem [256M] Select DVMT 5.
EMX-Q87R User’s Manual 3.4.3.2.1.1 LCD Control Primary IGFX Boot Display [VBIOS Default] Select the Video Device that will be activated during POST. This has no effect if external graphics present. Secondary booty display selection will appear based on your selection. VGA modes will be supported only on primary display.
EMX-Q87R User’s Manual 3.4.3.2.2 PCIe Configuration PEG0 – Gen X [Auto] Configure PEG0 Gen1~Gen3 Configuration options: [Auto][Gen1][Gen2][Gen3] Enable PEG [Auto] To enable/Disable the PEG slot. Configuration options:[Auto][Enable][Disable] Detect Non-Compliance Device [Disabled] Configuration options:[Enable][Disable] PEG ASPM [Disabled] Control ASPM support for the PEG Device. This has no effect if PEG is not the currently active device.
EMX-Q87R User’s Manual 3.4.3.2.
EMX-Q87R User’s Manual 3.4.4 Boot Boot Configuration Setup Prompt Timeout [1] Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
EMX-Q87R User’s Manual 3.4.
EMX-Q87R User’s Manual 3.4.6 Save & Exit Save changes and Exit Exit system setup after saving the changes. Discard changes and Exit Exit system setup without saving the changes. Save changes and Reset Reset system after saving the changes. Discard changes and Reset Reset system without saving the changes. Restore Defaults Restore/Load default values for all the setup option.
