EPC-CDV Fanless Intel® Atom™ D2550 Tiny Box PC with Intel® NM10 Express Chipset Quick Reference Guide 1st Ed – 27 July 2012 Copyright Notice Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EPC-CDV Content 1. Getting Started ............................................................................................................ 3 1.1 1.2 1.3 1.4 1.4.1 1.5 2. Front & Rear View ................................................................................................................... 6 System Dimensions ............................................................................................... 7 1.5.1 Top/ Front & Side (with rubber foot) ..................................
Quick Reference Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EPC-CDV 1.3 System Specifications System Board ECM-CDV CPU Onboard Intel® Atom™ D2550 1.86GHz CPU BIOS AMI 16Mbit SPI BIOS System Chipset Intel® NM10 Express Chipset I/O Chip Nuvoton W83627DHG-P System Memory One 204-pin DDR3 SODIMM Socket Up to 4GB DDR3 800/ 1066 SDRAM SSD One CompactFlash Type I/II Socket Hard Disk 1 x 2.5” SATA HDD/ SSD Watchdog Timer Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min.
Quick Reference Guide Environment & Mechanical Power Requirement +12 ~ +26Vdc (+12V/ 5A Lockable DC Plug Adapter is an Accessory to This System) Single Power ATX Support S0, S3, S4, S5 ACPI ACPI 3.
EPC-CDV 1.4 System Overview 1.4.
Quick Reference Guide 1.5 System Dimensions 1.5.
EPC-CDV 1.5.
Quick Reference Guide 2. Hardware Configuration Please refer to ECM- CDV Quick Installation Guide or User’s Manual for advanced information. Note: If you need more information, please visit our website: http://www.avalue.com.
EPC-CDV 2.
Quick Reference Guide 2.2 EPC-CDV connector mapping 2.2.1 2.2.
EPC-CDV 2.2.
Quick Reference Guide 2.3 Installing Aluminum Stand (EPC-CDV) Step1. Attach stand to your system by means of two screws. Step2. Stand installation completed.
EPC-CDV 2.4 Installing Hard Disk & Memory (EPC-CDV) Step1. Remove the 4 screws from VGA and COM before removing back cover. Step2. Remove the 8 screws to disassemble your system front & back cover.
Quick Reference Guide Step3. 1 For HDD installation, please remove 4 screws to detach top cover, HDD enclosure from board & system assembly. Step3. 2 Fix HDD using the 3 screws in the Accessory Kit. Step4.1 Properly install the memory module and press until properly seated. Step4.2 Re-assemble your system back through previous steps to complete the installation.
EPC-CDV 2.5 Installing Mounting Bracket (Optional) Step 1. 16 Fasten 4 screws on both sides of EPC Embedded System. .
