EPI-QM77 Intel Chief River QM77 EPIC Module User’s manual 2nd Ed – 9 January 2013 Copyright Notice Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EPI-QM77 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
EPI-QM77 If you still cannot find the answer, gather all the information or questions that apply to your problem, and with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the support you need to get the most from your Avalue’s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue’s engineers every business day.
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
EPI-QM77 Content 1. Getting Started ........................................................................................................... 9 1.1 Safety Precautions ................................................................................................ 9 1.2 Packing List ........................................................................................................... 9 1.3 Document Amendment History ............................................................................ 10 1.
User’s Manual 2.4.22 2.5 USB connector 4&5 (JUSB1_1) .............................................................................................. 34 Installing the CPU ................................................................................................ 35 2.5.1 Locate the CPU socket on the board. ...................................................................................... 35 2.5.2 Separate CPU cooler and its base first by screw drawer ..........................................
EPI-QM77 3.6.3.1.2 USB Configuration ........................................................................................... 64 3.6.3.1.3 PCH Azalia Configuration ................................................................................ 65 3.6.3.2 System Agent (SA) Configuration ....................................................................... 65 3.6.3.2.1 Memory Configuration ....................................................................................... 66 3.6.3.2.
User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
EPI-QM77 1.
User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology EPI-QM77 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with EPI-QM77 series or change the standard configurations.
EPI-QM77 1.5 System Specifications System CPU Intel Ivy Bridge Processor (35W~45W CPU) BIOS AMI 8MB SPI BIOS System Chipset I/O Chip System Memory SSD Watchdog Timer H/W Status Monitor Expansion Intel Panther Point-Mbl (QM77) Nuvoton NTC6776F One 204-pin DDR3 SODIMM socket, supports up to 8GB DDR3 1066/1333 SDRAM 1 x mSATA (from mini-PCIe slot) Reset: 1 sec.~65535 sec./min. and 1 sec. or 1 min./step Monitoring system temperature, voltage.
User’s Manual Audio Interface Min In, Line in, Line out (Pin Head 6X2) Ethernet LAN Chip 1 x Intel 82574L 1 x Intel 82579 Gigabit PHY Ethernet Interface 1000 Base-Tx Gigabit Ethernet compatible Mechanical & Environmental Power Requirement +12V~19V, reserve power connector for SATA ACPI Power Type Operating Temp. Single power ATX Support S0, S3, S4, S5 ACPI 1.0b and 2.
EPI-QM77 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EPI-QM77.
User’s Manual 2.
EPI-QM77 2.
User’s Manual EPI-QM77 User’s Manual 17
EPI-QM77 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
User’s Manual 2.2.1 Main Memory EPI-QM77 provides one 204-pin DDR3 SODIMM socket, supports up to 8GB DDR3 1066/1333 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Keep away of touching its connectors. Align the notch key on the module with the rib on the slot.
EPI-QM77 To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module. Note: (1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase your system’s performance without acquiring technical information in advance. (2) Static electricity can damage the electronic components of the computer or optional boards.
User’s Manual 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
EPI-QM77 Connectors Label Function Note BAT1 Battery connector 2 x 1 wafer, pitch 1.25mm CN2 DVI connector CN4 204-pin DDR3 SODIMM CN7 Audio out connector Audio jack CPU_FAN1 CPU Fan connector 4 x 1 wafer, pitch 2.54mm HDMI HDMI connector HD_PWR1 HD power connector 4 x 1 wafer, pitch 2.50mm J422/1 Serial Port 1 connector 3 x 2 header, pitch 2.00mm JAUDIO1 Audio Connector 6 x 2 header, pitch 2.00mm JBKL1 LCD Inverter connector 1 5 x 1 wafer, pitch 2.
User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS *Default 2.4.
EPI-QM77 2.4.3 AT/ATX mode selector, Front panel & LED settings (JFP1) AT* ATX *Default Signal PIN PWBT 1, 2 RST# 3, 4 PWR-LED 5, 6 HDD-LED 7, 8 Short: AT MODE Open: ATX MODE COPEN# 2.4.
User’s Manual 2.4.5 Battery connector (BAT1) 2.4.6 Signal PIN GND 2 VBAT 1 Audio connector (JAUDIO1) Signal PIN PIN Signal GND 12 11 MIC_JD LINE1_JD 10 9 LINE2_JD MIC_LIN 8 7 MIC_RIN LINE1_LIN 6 5 LINE1_RIN GND 4 3 GND LINE2_LOUT 2 1 LINE2_ROUT 2.4.6.
EPI-QM77 2.4.7 2.4.
User’s Manual 2.4.9 PS/2 keyboard & mouse connector (JKB/MS1) Signal 2.4.
EPI-QM77 2.4.11 Serial Port 1 connector (J422/1) Signal PIN PIN Signal GND 6 5 +5V RX+ 4 3 TX+ RX- 2 1 TX- Note: J422/1 is available after modifying the mode of COM1 in BIOS setting. 2.4.
User’s Manual 2.4.13 LCD Inverter Connector 1 (JBKL1) JBKL1 Signal PIN +5V 5 BRIGHT 4 BLK_ON 3 GND 2 +12V 1 2.4.13.1 Signal Description – LCD Inverter Connector (JBKL1) Signal Signal Description BRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.7KΩ, >1/16W) BLK_ON LCD backlight ON/OFF control signal 2.4.
EPI-QM77 2.4.15 2.4.
User’s Manual 2.4.
EPI-QM77 2.4.
User’s Manual 2.4.19 General purpose I/O connector (JDIO1) Signal 2.4.
EPI-QM77 2.4.21 SPI connector (JSPI1) Signal 2.4.22 PIN PIN Signal 7 HOLD# SPI_SI 6 5 SPI_SO SPI_CLK 4 3 SPI_CS0# GND 2 1 +V3.3M_SPI Signal PIN PIN Signal USBVCC4 1 2 GND USB_PN_Z_4 3 4 GND USB_PP_Z_4 5 6 USB_PP_Z_5 GND 7 8 USB_PN_Z_5 GND 9 10 USBVCC4 USB connector 4&5 (JUSB1_1) Note: Wrong USB cable configuration with USB devices might damage USB devices.
User’s Manual 2.5 Installing the CPU 2.5.1 Locate the CPU socket on the board. Before installing the CPU, make sure that the socket box is facing towards you and the load lever is on your left.
EPI-QM77 2.5.2 Separate CPU cooler and its base first by screw drawer 1.
User’s Manual 2. turn the CPU lock clockwise to lock CPU The CPU fits in only one correct orientation.
EPI-QM77 3.
User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it.
EPI-QM77 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the CMOS settings which resets your system to its defaults.
EPI-QM77 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock.
User’s Manual 3.6.1.1 System Language This option allows choosing the system default language. 3.6.1.2 System Date Use the system time option to set the system time. Manually enter the hours, minutes and seconds. 3.6.1.3 System Time Use the system Date option to set the system date. Manually enter the day, month and year. Note: The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. Visit the Avalue website (www.avalue.com.
EPI-QM77 3.6.2.1 APCI Settings Item APCI Sleep State S3 Video Repost Options Suspend Disabled S1 only(CPU Stop Clock) S3 only(Suspend to RAM)[Default] Disabled[Default] Enabled 3.6.2.2 S5 RTC Wake Settings 44 EPI-QM77 User’s Manual Description Select ACPI sleep state the system will enter when the SUSPEND button is pressed. Enable or Disable S3 Video Repost.
User’s Manual Item Options Wake system with Fixed Time Disabled[Default], Enabled Wake system with Dynamic Time Disabled[Default], Enabled Description Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified. Enable or disable System wake on alarm event. When enabled, System will wake on the current time + Increase minute(s). 3.6.2.
EPI-QM77 3.6.2.4 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
User’s Manual 3.6.2.5 SATA Configuration It allows you to select the operation mode for SATA controller. Item SATA Controller(s) SATA Mode Selection SATA Test Mode Options Enabled[Default] Disabled IDE[Default] AHCI RAID Enabled Disabled[Default] Description Enable or disable SATA Device. Determines how SATA controller (s) operate. Enable or disable Test Mode. 3.6.2.
EPI-QM77 Item Automatic Thermal Reporting Active Trip Point 0 Fan Speed Active Trip Point 1 Active Trip Point 1 Fan Speed Passive TC1 / TC2 Value Passive TSP Value PCH Thermal Device PCH Temp Read CPU Energy Read CPU Temp Read 48 EPI-QM77 User’s Manual Options Description Configure _CRT, _PSV and _AC0 automatically based on values recommended Disabled, in BWG’s Thermal Reporting for Thermal Enabled[Default] Management settings. Set to Disabled for manual configuration.
User’s Manual Alert Enable Lock PCH Alert DIMM Alert Disabled, Enabled[Default] Disabled[Default], Enabled Disabled[Default], Enabled Lock all Alert Enable settings PCH Alert pin enable DIMM Alert pin enable 3.6.2.7 Intel(R) Rapid Start Technology Configuration 3.6.2.
EPI-QM77 3.6.2.9 PCH-FW Configuration Item MDES BIOS Status Code Firmware Update Configuration Item Me FW Image Re-Flash 50 EPI-QM77 User’s Manual Options Description Disabled[Default] Enable/Disable MDES BIOS Status Code. Enabled Configure Management Engine Technology Parameters. Options Disabled[Default] Enabled Description Enable/Disable Me FW Image Re-Flash function.
User’s Manual 3.6.2.
EPI-QM77 3.6.2.11 AMT Configuration Intel AMT allows hardware-based remote management, security, power-management, and remote-configuration features. Item Intel AMT BIOS Hotkey Pressed MEBx Selection Screen Hide Un-Configure ME Confirmation MEBx Debug Message Output Un-configure ME AMT Wait Timer Disable ME ASF Active Remote Assistance Process USB Configure PET progress WatchDog 52 EPI-QM77 User’s Manual Options Description Enable/Disable Intel ® Active Management Technology BIOS Extension.
User’s Manual 3.6.2.12 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. Item Options Legacy USB Support Enabled[Default] Disabled Auto USB3.
EPI-QM77 3.6.2.13 Super IO Configuration You can use this item to set up or change the Super IO configuration for FDD controllers, parallel ports and serial ports. Please refer to 3.6.2.13.1 and 3.6.2.13.2 for more information.
User’s Manual 3.6.2.13.1 Serial Port 1 Configuration Item Serial Port Change Settings UART 232 422 485 Option Enabled, Disabled[Default] Auto[Default] IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 UART 232[Default], UART 422, UART485 Description Enable or Disable Serial Port (COM) Select an optimal setting for Super IO device.
EPI-QM77 3.6.2.13.2 Serial Port 2 Configuration Item Serial Port Change Settings Device mode 56 EPI-QM77 User’s Manual Option Enabled, Disabled[Default] Auto[Default] IO=2F8h; IRQ=3 IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 Standard Serial Port Mode[Default] IrDA 1.0 (HP SIR) Mode ASKIR Mode Description Enable or Disable Serial Port (COM) Select an optimal setting for super IO device.
User’s Manual 3.6.2.14 Hardware Monitor Displays system health status Item Description Smart Fan Function Enable or Disable Smart Fan. The following system temperature, fan speed and voltage are monitored.
EPI-QM77 3.6.2.15 Intel® Smart Connect Technology Item ISCT Configuration 3.6.2.16 CPU PPM Configuration 58 EPI-QM77 User’s Manual Enabled Disabled[Default] Description Enable/Disable ISCT Configuration.
User’s Manual Item EIST Turbo Mode CPU C3/6/7 Report Config TDP LOCK Long Duration power limit Long Duration maintained Short Duration power limit ACPI T State 3.6.3 Option Description Enable or Disable Intel Speedstep. Disabled Turbo Mode. Enabled[Default] Enable or Disable CPU C3(ACPI C2)/6(ACPI C3)/7(ACPI C3) report to OS. Disabled[Default] Lock the Config TDP Control Enabled register. Long duration power limit in Watts, 0 means use factory default.
EPI-QM77 3.6.3.1 PCH-IO Configuration Item PCI Express Configuration USB Configuration PCH Azalia Configuration Intel 82579 LAN (PHY) Option Description PCI Express Configuration settings. USB Configuration settings. PCH Azalia Configuration settings. Disabled Enable or disable onboard NIC. Enabled[Default] Wake on LAN (PHY) Disabled Enabled[Default] Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.
User’s Manual 3.6.3.1.1 PCI Express Configuration Item PCI Express Root Port 1 PCI Express Root Port 6 PCI Express Root Port 7(82574 Lan) 3.6.3.1.1.1 Description PCI Express Root Port 1 Settings. PCI Express Root Port 6 Settings. PCI Express Root Port 7 Settings.
EPI-QM77 Item PCI Express Root Port 1 ASPM Support PCIe Speed 3.6.3.1.1.2 Option Disabled Enabled[Default] Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s-Force all links to L0s State: AUTO-BIOS auto configure: DISABLE-Disables ASPM. Select PCI Express port speed.
User’s Manual 3.6.3.1.1.3 PCI Express Root Port 7(82574 Lan) Item PCI Express Root Port 7 ASPM Support PCIe Speed Option Disabled Enabled[Default] Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s-Force all links to L0s State: AUTO-BIOS auto configure: DISABLE-Disables ASPM. Select PCI Express port speed.
EPI-QM77 3.6.3.1.2 USB Configuration Item XHCI Pre-Boot Driver xHCI Mode HS Port #1/#2/#3/#4 Switchable xHCI Streams EHCI1/2 USB Ports Per-Port Disable Control 64 EPI-QM77 User’s Manual Option Disabled Enabled[Default] Smart Auto[Default] Auto Enabled Disabled Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Disabled[Default] Enabled Description Enable or disable XHCI Pre-Boot Driver support. Mode of operation of xHCI controller.
User’s Manual 3.6.3.1.3 PCH Azalia Configuration Item Azalia HDMI codec Port C 3.6.3.2 Option Disabled Enabled[Default] Description Enable or disable internal HDMI codec Port for Azalia.
EPI-QM77 Item Option Disabled Enabled[Default] VT-d CHAP Device ( B0:D7:F0) Disabled[Default] Enabled Thermal Device ( B0:D4:F0) Memory Configuration GT – Power Management Control 3.6.3.2.1 Description Check to enable VT-d function on MCH. Enable or Disable SA CHAP Device. Enable or Disable SA Thermal Device. Memory Configuration Parameters. GT – Power Management Control Options.
User’s Manual 3.6.3.2.2 GT – Power Management Control Item Option RC6 (Render Standby) RC6+(Deep RC6) Disabled[Default] Enabled GT Overclocking Support 3.6.3.3 Description Check to enable render standby support. Check to enable Deep RC6(RC6+) support. Enable or Disable GT OverClocking Support.
EPI-QM77 Item Option Graphics Turbo IMON Current 14 ~31[Default] Primary Display Auto IGFX[Default] Internal Graphics GTT Size Aperture Size Auto[Default] Disabled Enabled 1MB 2MB[Default] [128MB] [256MB] [Default] [512MB] Description Graphics turbo IMON current values (14 -31) Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx. Keep IGD enabled based on the setup options.
User’s Manual SDVO encoder. eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A. eDP Port-D: LFP Driven by Int-DisplayPort encoder from Port-D (through PCH).
EPI-QM77 3.6.4 Boot Item Setup Prompt Timeout Bootup NumLock State Quiet Boot Fast Boot GateA20 Active Option ROM Messages INT19 Trap Response Boot Option #1/2/3 CSM parameters 70 EPI-QM77 User’s Manual Option Description Number of seconds to wait for setup activation key. 1~ 65535 65535(0xFFFF) means indefinite waiting.
User’s Manual 3.6.4.1 CSM parameters Item Launch CSM Boot option filter Launch PXE OpROM policy Launch Storage OpROM policy Launch Video OpROM policy Other PCI device ROM priority Option Always[Default] Never UEFI and Legacy[Default] Legacy only UEFI only Do not launch UEFI only[Default] Legacy only Do not launch UEFI only[Default] Legacy only Do not launch[Default] UEFI only Legacy only UEFI OpROM[Default] Legacy OpROM Description This option controls if CSM will be launched.
EPI-QM77 3.6.5 Security Administrator Password Set setup Administrator Password User Password Set User Password 3.6.
User’s Manual Save changes and Exit Exit system setup after saving the changes.
EPI-QM77 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
User’s Manual 4.1 Install Chipset Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\EPI-QM77 INF. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next..
EPI-QM77 4.2 Install ME Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Utility\EPI-QM77ME_iAMP_vPRO Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next to proceed setup.
User’s Manual Step 6. Click Finish to complete setup.
EPI-QM77 4.3 Install USB 3.0 Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Utility\EPI-QM77 USB 3.0. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step1.
User’s Manual 4.4 Install Display Driver (For Intel QM77) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \ Driver_Video\Intel\QM77. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next. Step 4. Click Install. Step 1. Click Next to continue installation. Step 2.
EPI-QM77 Step 6. Click Finish to complete setup.
User’s Manual 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek\ALC892\EPI-QM77 AUDIO. Note: The installation procedures and screen shots in this section are based on Windows 2000 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup.
EPI-QM77 4.6 Install Ethernet Driver (For Intel 82579LM and 82574L) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to D:\ Driver_Gigabit\Intel\82579\WinXP. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next after choosing features to install. Step 4. Click Install to proceed. Step 1.
User’s Manual Step 6. Click Finish to complete the setup.
EPI-QM77 5.
User’s Manual Unit: mm EPI-QM77 User’s Manual 85
EPI-QM77 Unit: mm 86 EPI-QM77 User’s Manual
