EPI-QM87R/ EPI-QM87 Intel® 4th Generation Core™ i7/i5/i3 Processor EPIC Module with Intel® QM87 Chipset User’s manual 1st Ed – 12 December 2014 Copyright Notice Copyright 2014 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EPI-QM87R/ EPI-QM87 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
EPI-QM87R/ EPI-QM87 Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
User’s Manual Content 1. Getting Started ........................................................................................................... 8 1.1 Safety Precautions ................................................................................................ 8 1.2 Packing List ........................................................................................................... 8 1.3 Document Amendment History ..............................................................................
EPI-QM87R/ EPI-QM87 2.4.22 General purpose I/O connector (JDIO) ................................................................................... 34 2.4.23 Power connector (PWR) .......................................................................................................... 34 2.4.24 USB 2.0 connector (JUSB1) .................................................................................................... 35 2.4.25 USB 2.0 connector (JUSB2) .............................................
User’s Manual 3.6.3.1.3 PCH Azalia Configuration ................................................................................ 60 3.6.3.2 System Agent (SA) Configuration .................................................................... 60 3.6.3.2.1 Graphics Configuration .................................................................................... 61 3.6.3.2.1.1 Graphics Configuration .................................................................................... 61 3.6.3.2.1.1.
EPI-QM87R/ EPI-QM87 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
User’s Manual 1.
EPI-QM87R/ EPI-QM87 1.4 Manual Objectives This manual describes in detail the Avalue Technology EPI-QM87R/ EPI-QM87 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board.
User’s Manual 1.5 System Specifications System CPU Intel® 4th Generation Core™ BGA processors BIOS AMI uEFI BIOS, 128 Mbit SPI Flash ROM System Chipset I/O Chip System Memory SSD Watchdog Timer H/W Status Monitor Expansion Intel QM87 PCH EC(IT8518E) 1 x 204-pin 1.35V DDR3L 1600/1333MHzSO-DIMM up to 8GB 1 x mSATA (from Mini PCIe slot) H/W Reset, 1sec. – 65535sec./min. 1sec. or 1min.
EPI-QM87R/ EPI-QM87 Mechanical & Environmental Power Requirement +12V~19V Power Type ACPI Operating Temp. Storage Temp. AT / ATX Single power ATX Support S0, S3, S4, S5 ACPI 3.0 Compliant 0°C ~60°C -40°C ~75°C Operating Humidity 0%~90% relative humidity, non-condensing Size (L x W) Weight 4.5" x 6.5" (115mm x 165mm) 0.41 lbs (0.
User’s Manual 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EPI-QM87R/ EPI-QM87.
EPI-QM87R/ EPI-QM87 2.
User’s Manual 2.
EPI-QM87R/ EPI-QM87 16 EPI-QM87R/ EPI-QM87 User’s Manual
User’s Manual 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change NVRAM settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
EPI-QM87R/ EPI-QM87 2.2.1 Main Memory EPI-QM87R/ EPI-QM87 provides one 204-pin DDR3L SODIMM socket, supports up to 8GB 1.35V DDR3L 1333/1600 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. Locate the SODIMM socket on the board. Hold two edges of the SODIMM module carefully. Keep away of touching its connectors.
User’s Manual Do not force the SODIMM module in with extra force as the SODIMM module only fit in one direction. To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module. Note: (1) Please do not change any DDR3L SDRAM parameter in BIOS setup to increase your system’s performance without acquiring technical information in advance. (2) Static electricity can damage the electronic components of the computer or optional boards.
EPI-QM87R/ EPI-QM87 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
User’s Manual Connectors Label Function Note BAT Battery connector 2 x 1 wafer, pitch 1.25mm CN2 DVI connector CN4 204-pin DDR3 SODIMM CPU_FAN CPU Fan connector HDMI1/2 HDMI connector SATA_PWR SATA power connector 4 x 1 wafer, pitch 2.50mm J422_1 Serial Port 1 connector 3 x 2 wafer, pitch 2.00mm J422_2 Serial Port 2 connector 3 x 2 wafer, pitch 2.00mm JAUDIO Audio Connector 6 x 2 wafer, pitch 2.00mm JBKL LCD Inverter connector 5 x 1 wafer, pitch 2.
EPI-QM87R/ EPI-QM87 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT) RTC Working* RTC Reset *Default 2.4.
User’s Manual 2.4.3 AT/ATX mode selector, Front panel & LED settings (JFP) AT* ATX *Default Signal PIN PWBT 1, 2 RST# 3, 4 PWR-LED 5, 6 HDD-LED 7, 8 Short: AT MODE Open: ATX MODE CASE_OPEN# 2.4.
EPI-QM87R/ EPI-QM87 2.4.5 LCD Backlight brightness adjustment (JVR) PWM mode* DC Mode * Default 2.4.6 Battery connector (BAT) 24 EPI-QM87R/ EPI-QM87 User’s Manual Signal PIN +3.
User’s Manual 2.4.7 Audio connector (JAUDIO) Signal PIN PIN Signal FRONT-L-OUT 1 2 FRONT-R-OUT GND 3 4 GND LINE1-L-IN 5 6 LINE1-R-IN MIC1-L-IN 7 8 MIC1-R-IN LINE1_JD 9 10 FRONT_JD GND 11 12 MIC1_JD 2.4.7.
EPI-QM87R/ EPI-QM87 2.4.8 2.4.
User’s Manual 2.4.10 2.4.
EPI-QM87R/ EPI-QM87 2.4.12 Serial port 1/ 2 connector (JCOM1/ JCOM2) JCOM1 Signal PIN IN Signal RI#_1 9 10 NC RTS#1 7 8 CTS#_1 GND 5 6 DSR#_1 TXD_1 3 4 DTR#_1 DCD#_1 1 2 RXD_1 JCOM2 JCOM1 2.4.
User’s Manual 2.4.14 Serial Port 1/2 RS-422-485 mode (J422_1 / J422_2) J422_1 Signal PIN PIN Signal 485_422TX1- 2 1 422RX1- 485_422TX1+ 4 3 422RX1+ +5V 6 5 GND J422_2 Note: J422/485 is available after modify the mode of COM1/2 in BIOS setting 2.4.15 LCD Inverter Connector (JBKL) Signal PIN +12V 1 GND 2 BKLEN 3 VBRIGHT 4 +5V 5 2.4.15.1 Signal Description – LCD Inverter Connector (JBKL) Signal Signal Description VBRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.
EPI-QM87R/ EPI-QM87 2.4.16 2.4.
User’s Manual 2.4.18 2.4.19 IrDA connector (JIR) Signal PIN IR_TX 5 GND 4 IR_RX 3 NC 2 +5V 1 SPI connector (JSPI) Signal PIN PIN Signal +3.
EPI-QM87R/ EPI-QM87 2.4.
User’s Manual 2.4.
EPI-QM87R/ EPI-QM87 2.4.22 General purpose I/O connector (JDIO) Signal 2.4.
User’s Manual 2.4.24 USB 2.0 connector (JUSB1) Signal PIN PIN Signal USBVCC6 1 2 USBVCC6 USB_PN_Z_12 3 4 USB_PN_Z_13 USB_PP_Z_12 5 6 USB_PP_Z_13 GND 7 8 GND GND 9 10 GND Note: Wrong USB cable configuration with USB devices might damage USB devices. 2.4.25 USB 2.
EPI-QM87R/ EPI-QM87 3.
User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the NVRAM and begins the process of checking out the system and configuring it.
EPI-QM87R/ EPI-QM87 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or key. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the NVRAM settings which resets your system to its defaults.
EPI-QM87R/ EPI-QM87 3.6 BIOS setup Once you enter the Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.6.1.1 System Language This option allows choosing the system default language. 3.6.1.
User’s Manual 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.
EPI-QM87R/ EPI-QM87 Item APCI Sleep State S3 Video Repost ErP Function Wakeup by Ring Watch Dog PWRON After PWR-Fail Options Suspend Disabled S3 only(Suspend to RAM)[Default] Disabled[Default] Enabled Disabled[Default] Enabled Disabled[Default] Enabled Disabled[Default] 30 sec 40 sec 50 sec 1 min 2 min 10 min 30 min Off[Default] On Former-Sts Description Select ACPI sleep state the system will enter when the SUSPEND button is pressed. Enable or Disable S3 Video Repost. Enable or Disable ErP.
User’s Manual 3.6.2.3 Trusted Computing Item Options Security Device Support Disabled[Default], Enabled Description Enables or Disables BIOS support for security device. O.S will not show Security Device. TCG EFI protocol and INT1A interface will not be available. 3.6.2.4 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU.
EPI-QM87R/ EPI-QM87 Item Options Hyper-threading Disabled Enabled[Default] Active Processor Cores All[Default] 1/2/3 Intel Virtualization Technology Disabled Enabled[Default] EIST CPU C states Enhanced C1 state CPU C3/6 Report C6 Latency CPU C7 Report C7 Latency Package C State limit Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Short[Default] Long Disabled CPU C7 CPU C7s[Default] Short Long[Default] C0/C1 C2 C3 44 EPI-QM87R/ EPI-QM87 U
User’s Manual C6 C7 C7s AUTO[Default] 3.6.2.5 SATA Configuration It allows you to select the operation mode for SATA controller. Item SATA Controller(s) SATA Mode Selection SATA Controller Speed Port 0/1/4 Hut Plug SATA Device Type (Port0/Port1) Options Enabled[Default] Disabled IDE AHCI[Default] RAID Default[Default] Gen1 Gen2 Gen3 Enabled[Default] Disabled Enabled Disabled[Default] Hard Disk Drive[Default] Solid State Device Description Enable or disable SATA Device.
EPI-QM87R/ EPI-QM87 3.6.2.5.1 Software Feature Mask Configuration Item RAID0 RAID1 RAID10 Option Enabled[Default] Disabled Enabled[Default] Disabled Enabled[Default] Disabled 3.6.2.6 Intel(R) Rapid Start Technology Configuration 46 EPI-QM87R/ EPI-QM87 User’s Manual Description Enable or disable RAID0 feature. Enable or disable RAID1 feature. Enable or disable RAID10 feature.
User’s Manual Item Option Enabled Disabled[Default] Intel® Rapid Start Technology Description Enable or disable Intel® Rapid Start Technology. 3.6.2.7 PCH-FW Configuration Item MDES BIOS Status Code Firmware Update Configuration Options Disabled[Default] Enabled Description Enable/Disable MDES BIOS Status Code. Configure Management Engine Technology Parameters. 3.6.2.7.
EPI-QM87R/ EPI-QM87 Item Me FW Image Re-Flash Options Disabled[Default] Enabled Description Enable/Disable Me FW Image Re-Flash function. 3.6.2.8 AMT Configuration Intel AMT allows hardware-based remote management, security, power-management, and remote-configuration features.
User’s Manual 3.6.2.9 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. Item Options Legacy USB Support Enabled[Default] Disabled Auto USB3.0 Support Enabled[Default] Disabled XHCI Hand-off Enabled[Default] Disabled EHCI Hand-off Enabled Disabled[Default] USB Mass Storage Driver Support Enabled[Default] Disabled Description Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected.
EPI-QM87R/ EPI-QM87 3.6.2.10 Hardware Monitor Displays system health status Item Description Smart Fan Function Enable or Disable Smart Fan. The following system temperature, fan speed and voltage are monitored.
User’s Manual 3.6.2.11 Super IO Configuration You can use this item to set up or change the Super IO configuration. Please refer to 3.6.2.11.1~4 for more information. 3.6.2.11.
EPI-QM87R/ EPI-QM87 Item Serial Port Change Settings Option Enabled[Default], Disabled Auto[Default] IO=3F8h; IRQ=4, IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 Device Mode Normal[Default] High Speed UART 232 422 485 UART 232[Default], UART 422, UART485 Description Enable or Disable Serial Port (COM) Select an optimal setting for Super IO device. Change the Serial Port mode.
User’s Manual UART 232 422 485 UART 232[Default], UART 422, UART485 Change the Serial Port as RS232/422/485. 3.6.2.11.3 Serial Port 3 Configuration Item Serial Port Change Settings Device Mode Option Enabled[Default] Disabled Auto[Default] IO=3E8h; IRQ=10 IO=3E8h; IRQ=3,4,5,6,7,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,10,11,12 IO=2F0h; IRQ=3,4,5,6,7,10,11,12 IO=2E0h; IRQ=3,4,5,6,7,10,11,12 Serial Port Function Mode[Default] IR Mode,Pusle 1.6us, Full Duplex IR Mode,Pusle 1.
EPI-QM87R/ EPI-QM87 3.6.2.11.4 Serial Port 4 Configuration Item Serial Port Change Settings Option Enabled[Default], Disabled Description Enable or Disable Serial Port (COM) Auto[Default] IO=2E8h; IRQ=10 IO=3E8h; IRQ=3,4,5,6,7,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,10,11,12 IO=2F0h; IRQ=3,4,5,6,7,10,11,12 IO=2E0h; IRQ=3,4,5,6,7,10,11,12 Select an optimal setting for super IO device.
User’s Manual 3.6.2.12 Network Stack Item Network stack Ipv4/6 PXE Support Option Enabled Disabled[Default] Enabled Disabled[Default] Description Enable/Disable UEFI network stack. Enable Ipv4/6 PXE Boot Support. If disabled IPV4/6 PXE boot option will not be created.
EPI-QM87R/ EPI-QM87 PXE boot wait time Media detect time 0[Default] 5 0[Default] 50 3.6.2.13 Intel RC Drivers Version Detail 3.6.3 Chipset 56 EPI-QM87R/ EPI-QM87 User’s Manual Wait time to press ESC key to abort the PXE boot. Enable/Disable UEFI network stack.
User’s Manual 3.6.3.1 PCH-IO Configuration Item PCI Express Configuration USB Configuration PCH Azalia Configuration PCH LAN Controller SLP_S4 Assertion Width Option Description PCI Express Configuration settings. USB Configuration settings. PCH Azalia Configuration settings. Disabled Enable or disable onboard NIC. Enabled[Default] Disabled 1-2 Seconds Select a minimum assertion width 2-3 Seconds of the SLP_S4# signal.
EPI-QM87R/ EPI-QM87 3.6.3.1.1 PCI Express Configuration Item PCI Express Root Port 1 PCI Express Root Port 6 PCI Express Root Port 7 3.6.3.1.1.1 Description PCI Express Root Port 1 Settings. PCI Express Root Port 6 Settings. PCI Express Root Port 7 Settings.
User’s Manual Item PCI Express Root Port 1/2/7 ASPM Support PCIe Speed 3.6.3.1.2 Option Disabled Enabled[Default] Disabled L0s L1 L0sL1 Auto[Default] Auto[Default] Gen1 Gen2 Description Control the PCI Express Root Port. Set the ASPM Level: Force L0s-Force all links to L0s State: AUTO-BIOS auto configure: DISABLE-Disables ASPM. Select PCI Express port speed.
EPI-QM87R/ EPI-QM87 3.6.3.1.3 PCH Azalia Configuration Item Option Azalia Disabled Enabled Auto[Default] 3.6.3.2 Description Control Detection of the Azalia device. Deisabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled Auto = Azalia will be enabled if present, disabled otherwise.
User’s Manual 3.6.3.2.1 Graphics Configuration 3.6.3.2.1.
EPI-QM87R/ EPI-QM87 Primary Display Internal Graphics Aperture Size Auto[Default] IGFX PEG PCIE Auto[Default] Disabled Enabled [128MB] [256MB] [Default] [512MB] Select which of IGFX/PCIE Graphics device should be Primary Display. Keep IGD enabled based on the setup options. Select the Aperture Size [32M] [Default] [64M] [96M] [128M] [160M] [192M] DVMT Pre-Allocated [224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] Select DVMT 5.
User’s Manual Off Force Scaling Active LFP No LVDS eDP Port-A[Default] by the Internal Graphics Device. Select the Active LFP Configuration. No LVDS:VBIOS does not enable LVDS. Int-LVDS. Int-LVDS:BIOS enables LVDS driver by Integrated encoder. SDVO LVDS:VBIOS enables LVDS driver by SDVO encoder. eDP Port-A:LFP Driven by Int-DisplayPort encoder from Port-A. eDP Port-D:LFP Driven by Int-DisplayPort encoder from Port-D9through PCH).
EPI-QM87R/ EPI-QM87 3.6.3.2.2 3.6.4 Memory Configuration Boot Item Option Setup Prompt Timeout 1~ 65535 Bootup NumLock State On[Default] 64 EPI-QM87R/ EPI-QM87 User’s Manual Description Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
User’s Manual Quiet Boot Fast Boot Off Disabled Enabled[Default] Disabled[Default] Enabled state Enables or disables Quiet Boot option Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Boot Option #1/2 Sets the system boot order CSM parameters OpROM execution, boot options filter,etc. 3.6.4.
EPI-QM87R/ EPI-QM87 Other PCI device ROM priority 3.6.5 UEFI OpROM[Default] Legacy OpROM Security Administrator Password Set setup Administrator Password User Password Set User Password 66 EPI-QM87R/ EPI-QM87 User’s Manual For PCI devices other than Network, Mass storage or Video defines which OpROM to launch.
User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 3.6.6.3 Restore Defaults This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.
EPI-QM87R/ EPI-QM87 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen.
User’s Manual 4.1 Install Chipset Driver (For Intel QM87) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\EPI-QM87. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next.
EPI-QM87R/ EPI-QM87 4.2 Install ME Driver (For Intel QM87) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\EPI-QM87_ME. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step1.
User’s Manual 4.3 Install USB 3.0 Driver (For Intel QM87) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Utility\EPI-QM87_USB3.0. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step 3.
EPI-QM87R/ EPI-QM87 4.4 Install Display Driver (For Intel QM87) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Video\Intel\EPI-QM87_Video. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 5.
User’s Manual 4.5 Install Audio Driver (For Realtek ALC892) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek\ALC892\EPI-QM87_Audio. Note: The installation procedures and screen shots in this section are based on Windows 2000 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup.
EPI-QM87R/ EPI-QM87 4.6 Install Ethernet Driver (For Intel I210AT and I217LM) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Gigabit\Intel\I217LM\EPI-QM87_LAN Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 1. Click Next. Step 2. Click Next to accept license agreement.
User’s Manual 5.
EPI-QM87R/ EPI-QM87 Unit: mm 76 EPI-QM87R/ EPI-QM87 User’s Manual
User’s Manual Unit: mm EPI-QM87R/ EPI-QM87 User’s Manual 77
