EQM-CDV Intel Cedarview Qseven Module Quick Installation Guide 1st Ed – 20 February 2012 Notice This guide is designed for experienced users to setup the system within the shortest time. For detailed information, please always refer to the electronic user's manual. Copyright Notice Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
EQM-CDV Content 1. Getting Started ........................................................................................................... 3 1.1 Safety Precautions ................................................................................................ 3 2. Hardware Configuration ............................................................................................ 4 2.1 Product Overview ..................................................................................................
Quick Installation Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
EQM-CDV 2.
Quick Installation Guide 2.
EQM-CDV 2.2 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
Quick Installation Guide 2.3 Setting Jumpers & Connectors 2.3.
EQM-CDV Signal PIN PIN Signal Signal PIN PIN Signal LVDS_A1- 105 106 NC LVDS_A2+ 107 108 NC PCIE1_TX+ 173 174 PCIE1_RX+ LVDS_A2- 109 110 NC PCIE1_TX- 175 176 PCIE1_RX- LVDS_PPEN 111 112 LVDS_BLEN NC 177 178 NC LVDS_A3+ 113 114 NC PCIE0_TX+ 179 180 PCIE0_RX+ LVDS_A3- 115 116 NC PCIE0_TX- 181 182 PCIE0_RX- GND15 117 118 GND16 GND27 183 184 GND28 LVDS_A_CLK+ 119 120 NC LPC_AD0 185 186 LPC_AD1 LVDS_A_CLK- 121 122 NC LPC_AD2 187 188 LPC_AD3 LVDS_BLT_CTRL
