ERS-A50M Fanless AMD® eOntario T56N Rugged Embedded System with AMD A50M Chipset Quick Reference Guide 2nd Ed – 9 August 2013 Part No.
ERS A50M FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Contents 1. Getting Started ............................................................................................................ 4 1.1 1.2 1.3 1.4 2. Safety Precautions ................................................................................................ 4 Packing List ........................................................................................................... 4 System Specifications .................................................................
ERS A50M 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Specifications System CPU AMD® eOntario T56N 1.6GHz CPU BIOS AMI 32 Mbit SPI BIOS System Chipset I/O Chip System Memory SSD Hard Disk Watchdog Timer H/W Status Monitor AMD A50M Chipset Winbond W83627DHG-P One 204-pin DDR3 SODIMM up to 4GB DDR3-1066 SDRAM 1 x CompactFlash Type I/II Socket 1 x 2.5” SATA HDD Reset: 1 sec.~255 min. and 1 sec. or 1 min./step Monitoring System Temperature, Voltage.
ERS A50M Operating Temp. Storage Temp. -10 ~ 50°C (w/CF),ambient w/ air flow -40 ~ 75°C (-4~167°F) Operating Humidity 0%~90% relative humidity, non-condensing Vibration Protection With CF/SSD: 5Grms, IEC 60068-2-64, Random, 10 ~ 500Hz, 1hr/axis Shock Protection Size (L x W) Weight 6 With CF/SSD: 50G, IEC 60068-2-27, Half Sine,11ms 271 * 150 * 55 mm 5.5lbs (2.
Quick Reference Guide 1.4 System Overview 1.4.1 Front & Top View 1.4.
ERS A50M 2. Hardware Configuration Jumper and Connector Setting, Driver and BIOS Installing For advanced information, please refer to: 1- ECM-A50M Quick Installation Guide or User’s Manual Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.
ERS A50M 2.2 ERS-A50M connector mapping 2.2.1 2.2.
Quick Reference Guide 2.3 Installing Hard Disk & Memory Step 1. Unfasten 3 screws from bottom and rear side. Step 2. Remove the chassis cover. Step 3. Insert the drive into position, and secure with 4 screws. Step 4. Insert DDR3 SODIMM into memory socket. Step 5.
ERS A50M 2.4 Installing Mounting Bracket (Optional) Step 1. Fasten 6 screws on both sides of ERS Rugged Embedded System. .