LPC-0805 8” Multi-functional Touch Panel Computer Quick Reference Guide 1st Ed –22 January 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
LPC-0805 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Content 1. Getting Started ........................................................................................................ 4 1.1 1.2 1.3 1.4 Safety Precautions .................................................................................................... 4 Packing List ............................................................................................................... 4 System Specifications ..................................................................
LPC-0805 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Panel LCD size 8" Display type SVGA TFT Resolution 800 x 600 Pixel pitch 0.0675mm(H) x 0.2025mm(V) Luminance 500 cd/m² Contrast ratio 500 Viewing angle 50(U), 70(D), 70(L), 70(R) Response time 25 ms Backlight LED Touch type 5 Wires resistive Touch Light Transmission 80% Touch interface USB (PenMount) System Board ECM-PNV CPU Intel® Pineview D525 1.
LPC-0805 Power Adapter Operating Temp. Storage Temp. Input: 100~240 Vac/ 50~60 Hz Output: +12 Vdc / 5 A (60W) 0°C to 40°C -20°C to 60°C Relative Humidity 10% to 95% @ 40°C, non-condensing Mounting Wall/Stand/VESA 75 mm X 75 mm Dimensions Weight 202.5 x 159.5 x 46.5 mm 1.5 Kgs Note: Specifications are subject to change without notice.
Quick Reference Guide 1.4 System Overview 1.4.1 Right View LINE OUT USB COM USB DC IN 1.4.2 Bottom View POWER DC-IN COM HDD LAN1 LAN2 LAN LAN VGA RESET KB/MS USB PWR CF Connectors Label Function POWER Power on button CF CF Type I/II Socket with Ejector Note DB-9 male connector Note：COM2 supports COM1/2 Serial port 1/2 connector LINE OUT Line-out audio jack USB USB 2.
LPC-0805 1.5 System Dimensions 5.3 202.5±0.3 162.6 46.5±0.3 31.5 15 10.7 18.7 20 16.8 WiFi antenna 192 LINE OUT 122.1 126 COM DC IN 15.2 133.5 USB 159.5±0.3 USB 5.5 M3(X8) MAX. DP=7mm 126 5.5 38.3 CF PWR KB/MS USB RESET LAN LAN 5.3 M4(X4) MAX. DP=3.5mm 75 18.7 16.8 DC-IN 0 . 3 192 POWER VGA 4 6 . 5 ± 31.5 15 HDD 3 COM 5.3 LINE OUT 126 122.1 USB 75 USB COM DC IN 5.5 5.5 M3(X8) MAX.
Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- ECM-PNV User’s Manual Note: If you need more information, please visit our website: http://www.avalue.com.
LPC-0805 2.1 LPC-0805 connector mapping 2.1.1 VGA connector (VGA) PIN Signal PIN Signal PIN Signal 1 R 6 GND 11 NC 2 G 7 GND 12 DATA 3 B 8 GND 13 HSYNC 4 NC 9 +5V 14 VSYNC 5 GND 10 GND 15 CLK 2.1.
Quick Reference Guide 2.1.
LPC-0805 2.2 Installing Memory Step 1. Unfasten 6 screws to remove the back cover. Step 2. Unlock 4 coppers from the rear I/O of VGA & COM ports. Step 3. Release 4 screws to take off the board, and install the RAM module into the memory slot.
Quick Reference Guide Step 4. Assemble the board and back cover back as step 3 to step 1.
LPC-0805 2.3 Installing CF Card Step 1. Unlock 2 screws from the rear side of the panel PC as above. Step 2. Put the CF card into the socket and fasten 2 screws back.
