LPC-0809 8” Multi-functional Touch Panel Computer Quick Reference Guide 1st Ed – 09 December 2014 Copyright Notice Copyright 2014 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
LPC-0809 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Content 1. Getting Started ........................................................................................................ 4 1.1 1.2 1.3 1.4 Safety Precautions .................................................................................................... 4 Packing List ............................................................................................................... 4 System Specifications ..................................................................
LPC-0809 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Panel LCD size 8" Display type SVGA TFT Resolution 800 x 600 Pixel pitch 0.0675mm(H) x 0.2025mm(V) Luminance 500 cd/m² Contrast ratio 500 Viewing angle 50(U), 70(D), 70(L), 70(R) Response time 25 ms Backlight LED Touch type 5 Wires resistive Touch Light Transmission 80% Touch interface USB EETI System Board CPU ECM-BYT Onboard I/O Chipset Memory SSD Intel® Atom Quad-Core E3845 1.
LPC-0809 Output: +12 Vdc / 5 A (60W) Operating Temp. Storage Temp. 0°C to 40°C -20°C to 60°C Relative Humidity 10% to 95% @ 40°C, non-condensing Mounting Wall/Stand/VESA 75 mm X 75 mm Dimensions Weight 202.5 x 159.5 x 46.5 mm 1.5 Kgs Note: Specifications are subject to change without notice.
Quick Reference Guide 1.4 System Overview 1.4.1 Bottom View 1.4.2 Right View Connectors Label Function POWER Power on button CF CF Type I/II Socket with Ejector COM1/2 Serial port 1/2 connector Note DB-9 male connector Note：COM1 support RS422/485 by BIOS setting LINE OUT USB Line-out audio jack USB 3.0 connector x 1 USB 2.
LPC-0809 1.
Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- ECM-BYT User’s Manual Note: If you need more information, please visit our website: http://www.avalue.com.
LPC-0809 2.1 LPC-0809 connector mapping 2.1.
Quick Reference Guide 2.1.2 Serial port 2 connector (COM2) Signal 2.1.
LPC-0809 2.2 Installing Memory Step 1. Unfasten 6 screws to remove the bottom chassis. Step 2. Unlock 4 coppers from the rear I/O of VGA & COM ports. Step 3. Release 4 screws to take off the board, and install the RAM module into the memory slot.
Quick Reference Guide Step 4. Assemble the board and bottom chassis back as step 3 to step 1.
LPC-0809 2.3 Installing CF Card Step 1. Unlock 2 screws from the rear side of the panel PC as above. Step 2. Put the CF card into the socket and fasten 2 screws back.
