LPC 10”/12” Series 10.4”/12.1” Multifunctional Touch Panel PC Quick Reference Guide 2nd Ed – 20 November 2013 Copyright Notice Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
LPC 10”/12” Series 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
Quick Reference Guide 1.3 System Specifications Panel Model LPC-1205 LPC-1005 12.1”, 4:3 10.4”, 4:3 LCD size SVGA XGA SVGA XGA 800 x 600 1024 x 768 800 x 600 1024 x 768 262K 262K 262K 16.2M Pixel pitch 0.240mm(H) x 0.240mm(V) 0.240mm(H) x 0.240mm(V) 0.264mm(H) x 0.264mm(V) 0.0685mm(H) x 0.
LPC 10”/12” Series External I/O Ports 1 x RS-232 COM Port Ethernet Port 1 x RJ-45 VGA / LCD Port 1 x DB-15 2 x USB 2.
Quick Reference Guide Panel Model LPC-1203 LPC-1003 12.1”, 4:3 10.4”, 4:3 LCD size SVGA XGA SVGA XGA 800 x 600 1024 x 768 800 x 600 1024 x 768 262K 262K 262K 262K Pixel pitch 0.3075mm(H) x 0.3075mm(V) 0.240mm(H) x 0.240mm(V) 0.264mm(H) x 0.264mm(V) 0.20625mm(H) x 0.
LPC 10”/12” Series External I/O Ports COM Port 1 x RS-232/422/485 setting by BIOS*, optional extra 1 x RS-232/422/485 Dual RTL8111C Giga LAN Ethernet Port 1 x DB-15 VGA / LCD Port Line-out Audio Port 2 x USB 2.
Quick Reference Guide Panel Model LPC-1201 LPC-1001 12.1”, 4:3 10.4”, 4:3 LCD size SVGA XGA SVGA XGA 800 x 600 1024 x 768 800 x 600 1024 x 768 262K 262K 262K 262K Pixel pitch 0.3075mm(H) x 0.3075mm(V) 0.240mm(H) x 0.240mm(V) 0.264mm(H) x 0.264mm(V) 0.20625mm(H) x 0.
LPC 10”/12” Series External I/O Ports 1 x RS-232 COM Port Dual RTL8110SC Giga LAN Ethernet Port 1 x DB-15 VGA / LCD Port Line-out Audio Port 2 x USB 2.
Quick Reference Guide 1.4 System Overview 1.4.1 Front View 1.4.2 Rear View POWER Connectors Label Function Note POWER Power on button CF CF Type I/II Socket with Ejector Optional for 2nd COM port COM Serial port DB-9 male connector LINE OUT Line-out audio jack USB 2 x USB 2.
LPC 10”/12” Series 1.5 System Dimensions 1.5.
Quick Reference Guide 1.5.
LPC 10”/12” Series 1.5.3 Bottom and Rear Side M3*3 Note: The M3*3 screw holes are reserved for LPC Series Panel Mount Brackets. Improper usage may harm the mechanical parts.
Quick Reference Guide M4*4 Follow these steps to install the wall mounting arm: 1. Place the wall mounting arm onto the back of panel PC. 2. Insert the 4 screws into the holes and tighten. Line up the holes of the arm with the holes of panel PC. 3. Reconnect the cables. Refer to the user’s manual of the optional wall mounting arm to attach it to the wall. Note: 75mmx75mm VESA hole(n=4), M4, pitch=0.5mm, deep=4mm.
LPC 10”/12” Series 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 BIOS settings 2.1.1 RS232/422/485 setting using BIOS 2.1.1.1 EBM-945GSE M/B The COM port setting of LPC-1003/1203, which applies for EBM-945GSE M/B, can be configured by BIOS. The path is shown as below. [BIOS Menu] [Integrated Peripherals] [Super IO Device] [COMPORT 232/422/485] The panel backlight of LPC-1003/1203, which applies for EBM-945GSE M/B, can be configured by BIOS as well. The path is shown as below.
LPC 10”/12” Series 2.1.1.2 EBM-PNV M/B The COM port setting of LPC-1005/1205, which applies for EBM-PNV M/B, can be configured by BIOS. The path is shown as below. [BIOS Menu] [Advanced] [Super IO Configuration] [Serial Port 2 mode for RS-232/422/485] Note: To change COM port setting, it is necessary to adjust SW2, JP1, JP2 settings of EBM-PNV as well.
Quick Reference Guide 2.1.1.2.
LPC 10”/12” Series 2.1.2 PWM Backlight control setting for EBM-PNV The Backlight control setting which applies for EBM-PNV M/B can be configured by BIOS; the path is shown as below. [Chipset] [North Bridge Configuration] [Video Function Configuration] Panel 2 Back light mode: PWM mode Panel 2 Back light control: 100% Note: Panel 1 Back light mode : DC mode Panel 1 Back light control : 50% Panel 1 control for 18bit LVDS panel.
Quick Reference Guide 2.2 Installing Hard Disk & Memory Step 1. Unfasten 6 screws from the case. Then take off the top chassis. Step 2. Insert the SODIMM into the memory socket.
LPC 10”/12” Series Step 3-1. HDD Installation: Insert the cable to connect the HDD and the SATA connecter. SATA Connector IDE Connector 20 LPC 10”/12” Series Quick Reference Guide SATA cable SATA wire Step 3-2. SATA HDD Installation: By default, the SATA cables had been inserted to the according connectors. Just connect to SATA HDD with the two cables.
Quick Reference Guide HDD Step 3-3. Insert the HDD into the Drive Bay. Remember to place the HDD down to the bottom exactly in order to screw the device tightly. Step 4. Place back the chassis with 6 screws locked.
