RPC-10W1 10.1" WSVGA TFT RISC Multifunctional Panel PC with RISC-IMX51 Quick Reference Guide 1st Ed –16 January 2012 Copyright Notice Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
RPC-10W1 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Life Support Policy Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF Avalue Technology Inc. As used herein: 1.
RPC-10W1 Headquarters and Branch Avalue USA Avalue Technology Inc. Avalue Technology Inc. 7F, 228, Lian-cheng Road, Chung Ho City, Taipei, 9 Timber Lane, Marlboro, NJ 07746-1443 Taiwan Tel: (732) 414-6500 Tel:+886-2-8226-2345 Fax: (732) 414-6501 Fax: +886-2-8226-2777 Information: sales@avalue-usa.com Information:sales@avalue.com.tw Service: support@avalue-usa.com Service: service@avalue.com.
Quick Reference Guide CONTENT 1. Getting Started ............................................................................................................ 6 1.1 1.2 1.3 1.4 2. Safety Precautions ................................................................................................ 6 Packing List ........................................................................................................... 6 System Specifications ..................................................................
RPC-10W1 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications Panel Model RPC-10W1-M51 RPC-10W1-M51W RPC-10W1-M51P 10.1” LCD size WSVGA TFT Display type 1024 x 600 Resolution 262K Color Pixel pitch 0.1905mm(H) x 0.189mm(V) Luminance 180cd/m² Contrast ratio 300 Viewing angle 15(U), 35(D), 45(L), 45(R) Response time 30 ms LED Backlight 4 Wires resistive Touch Type 80% Touch Light Transmission n/a Integrated Module w/ WiFi Module w/ POE Module System Board RSC-IMX51 CPU Freescale i.
RPC-10W1 1.4 System Overview 1.4.1 Overview 1.4.
Quick Reference Guide 1.4.3 System Rear View 1.4.
RPC-10W1 2. Hardware Configuration Jumper and Connector Setting, Driver and BIOS Installing For advanced information, please refer to: 1- RSC-IMX51 Installation Guide or User’s Manual 2- EAM-POE and AUX-mPCIe (Optional) Installation Guide. Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 Jumper & connector list Connectors Label Function Note COM1 Serial port connector1 DB-9 male connector COM2 Serial port connector2 DB-9 male connector DC-IN +12V DC power-in connector LAN RJ-45 Fast Ethernet connector MODE SWITCH Boot Mode selector Mini USB USB client connector Right side POE RJ-45 POE connector For RPC-10W1-M51P Power S/W System power switch RESET Reset button SD Card Slot SD/SDHC card socket Right side USB USB 2.
RPC-10W1 2.2.2 Boot Mode selector (SW2) Boot from onboard SD Boot from SD socket Signal PIN PIN BMOD1 1 5 BMOD0 2 6 BT_SRC[1] 3 7 BT_SRC[0] 4 8 Signal +V2D775_BOOT +V1D8_DIG1 USB OTG mode (Reflash onboard SD only) Please note: DIP Switch setting: 0=Off, 1=On When Position4 is switched On, the system is forced to power On as soon as power is applied. Switch to Off mode for normal operation. 2.2.
