SEPC-CDD2 Fanless Intel® Atom™ D2550 with Intel® NM10 Express Chipset Tiny Box PC Quick Reference Guide 1st Ed – 02 February 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
SEPC-CDD2 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
SEPC-CDD2 Content 1. Getting Started ............................................................................................................ 5 1.1 1.2 1.3 1.4 Safety Precautions ................................................................................................ 5 Packing List ........................................................................................................... 5 System Specifications ..................................................................................
Quick Reference Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
SEPC-CDD2 1.3 System Specifications System CPU Onboard Intel® Atom™ Processor D2550 (1M Cache, 1.86 GHz) BIOS AMI 16MBit SPI BIOS System Chipset I/O Chip System Memory Storage Watchdog Timer H/W Status Monitor Expansion Intel® NM10 Express Chipset Nuvoton NCT5577D One 204-pin DDR3 1066/1333MHZ SO-DIMM socket, supports up to 4GB Max Support 2.5” Driver Bay Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min.
Quick Reference Guide SIM card SIM card 1x SIM Card socket SD card socket SD card socket 1 x SD Card socket Environment &Mechanical Power Type Operating Temp. Storage Temp 12V 5A 60W adapter 0 ~ 45°C (32 ~ 113°F), (w/SSD, mSATA), ambient w/ air flow 0 ~ 40°C (32 ~ 104°F), (w/HDD), ambient w/ air flow -20 ~ 75°C (-4 ~ 167°F) w/SSD -20 ~ 65°C ( -4 ~ 149°F )w/HDD Operating Humidity 0 ~ 90% Relative Humidity, Non-condensing Size (L x W) 180mm x 122mm x 55.
SEPC-CDD2 1.4 System Overview 1.4.1 Front View Connectors Label Function Power Button Power on button HDD LED HDD LED indicator CIR Consumer IR USB 2 X USB 2.0 Type A connector Note SD Card Socket SD/MS/MMC socket 1.4.
Quick Reference Guide Line-out Line-out jack Mic-in Microphone-in audio jack LAN Gigabit LAN (RJ-45) connector USB 2 X USB 2.
SEPC-CDD2 1.
Quick Reference Guide 2. Hardware Configuration Please refer to ENX-CDD User’s Manual for advanced information. Note: If you need more information, please visit our website: http://www.avalue.com.
SEPC-CDD2 2.1 SEPC-CDD2 connector mapping 2.1.1 2.1.
Quick Reference Guide 2.1.3 Gigabit LAN (RJ-45) connector (LAN) Speed Speed Status Description Note: This port allows Gigabit connection to a Local OFF Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED Green indications.
SEPC-CDD2 2.2 Installing Hard Disk & Memory Step1. Unfasten 4 screws to remove the back cover.
Quick Reference Guide Step2. Insert the HDD and fasten 4 screws. Step3. Assemble the back cover back as step 2 to step 1.
