SEPC-CDT Fanless Intel® Atom™ Processor D2550 with Intel® NM10 Express Chipset Tiny Box PC Quick Reference Guide 1st Ed – 02 March 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
SEPC-CDT FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide Content 1. Getting Started ............................................................................................................ 4 1.1 1.2 1.3 1.4 1.4.1 Front View .................................................................................................................................... 7 1.4.2 Rear View..................................................................................................................................... 7 1.5 1.5.1 2.
SEPC-CDT 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Quick Reference Guide 1.3 System Specifications System CPU Onboard Intel® Atom™ Processor D2550 (1M Cache, 1.86 GHz) System Chipset Intel® NM10 Express Chipset System Memory One 204-pin DDR3 1066/1333MHZ SO-DIMM socket, supports up to 4GB Max Storage Watchdog Timer H/W Status Monitor Expansion 1 x 2.5” Driver Bay Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min.
SEPC-CDT LAN Chip Ethernet Interface 2 x Intel® 82583V Gigabit Ethernet 10/ 100/ 1000 Base-Tx GbE compatible SIM card SIM card 1 x SIM card socket Environment &Mechanical Power Type Operating Temp.
Quick Reference Guide 1.4 System Overview 1.4.1 Front View Connectors Label Function Note Power LED Power LED indicator Power LED is off by S3 Mode HDD LED HDD LED indicator USB 2 X USB 2.0 Type A connector Line-out Line-out jack Mic-in Microphone-in audio jack 1.4.2 Rear View Connectors Label COM1~6 Function Note 6 X Serial port connector COM 1/3/4: RS-232, Pin 9 with power/ +5V&+12V supported. COM 2: RS-232/485, Pin 9 with power/ +5V&+12V supported.
SEPC-CDT USB 3 X USB 2.
Quick Reference Guide 1.5 System Dimensions 1.5.
SEPC-CDT 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.
Quick Reference Guide 2.1 SEPC-CDT connector mapping 2.1.1 VGA connector (VGA) PIN Signal PIN Signal PIN Signal 1 R 6 GND 11 NC 2 G 7 GND 12 DATA 3 B 8 GND 13 HSYNC 4 NC 9 +5V 14 VSYNC 5 GND 10 GND 15 CLK 2.1.2 Gigabit LAN (RJ-45) connector (LAN) Speed Speed ACT/Link Status Description Status ACT/Link Description 10Mbps Note: OFF This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
SEPC-CDT 2.1.3 Serial port connector (COM RS-232) Signal Note: COM 1/3/4: RS-232, Pin 9 with power/ +5V&+12V PIN PIN Signal DCD# 1 6 DSR# RXD 2 7 RTS# TXD 3 8 CTS# DTR# 4 9 RI#(5V/12V) GND 5 supported. COM 5/6: RS-232, Pin 9 without power Default: without power 2.1.
Quick Reference Guide 2.2 Installing Hard Disk & Memory Step1. Unfasten 4 screws to remove the back cover.
SEPC-CDT Step2. Insert the HDD、Memory and fasten 4 screws. Step3. Assemble the back cover back as step 2 to step 1.
