SEPC-KA Fanless Onboard AMD Embedded G-Series SOC Quad core Processor Tiny Box PC Quick Reference Guide 1st Ed – 13 February 2015 Copyright Notice Copyright 2015 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No.
SEPC-KA FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
Quick Reference Guide these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
SEPC-KA Content 1. Getting Started ............................................................................................................ 5 1.1 1.2 1.3 1.4 Safety Precautions ................................................................................................ 5 Packing List ........................................................................................................... 5 System Specifications ....................................................................................
Quick Reference Guide 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card.
SEPC-KA 1.3 System Specifications System CPU BIOS I/O Chip System Memory Storage Watchdog Timer H/W Status Monitor Expansion Onboard AMD Embedded G-Series SOC Quad core GX-415GA 1.5GHz Processor AMI uEFI BIOS 32Mbit SPI Flash ROM Nuvoton NCT5532D One 204-pin DDR3/DDR3L 1600/1333MHZ SO-DIMM socket, supports up to 16GB Max 1 x 2.5” Driver Bay Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min.
Quick Reference Guide Audio Interface 1 x Mic-in, 1 x Line out Ethernet LAN Chip Ethernet Interface 1 x Realtek RTL8111G PCI-e Gigabit Ethernet 10/100/1000 Base-Tx GbE compatible SIM card SIM card 1 x SIM Card socket SD card socket SD card socket 1 x SD Card socket Environment &Mechanical Power Type Operating Temp.
SEPC-KA 1.4 System Overview 1.4.1 Front View Connectors Label Function HDD LED HDD LED indicator Power LED Power LED indicator CIR Consumer IR USB 2 X USB 3.0 Type A connector Line-out Line-out jack Mic-in Microphone-in audio jack Note SD Card Socket SD/MS/MMC socket 1.4.
Quick Reference Guide DC-in DC power-in connector HDMI HDMI connector S/PIDF Sony/Philips Digital Interface SMA Onboard SMA connector LAN Gigabit LAN (RJ-45) connector USB 4 X USB 3.
SEPC-KA 1.
Quick Reference Guide 2. Hardware Configuration Please refer to SENX-KA User’s Manual for advanced information. Note: If you need more information, please visit our website: http://www.avalue.com.
SEPC-KA 2.1 SEPC-KA connector mapping 2.1.1 2.1.2 Serial port connector (COM) Signal PIN PIN Signal DCD# 1 6 DSR# RXD 2 7 RTS# TXD 3 8 CTS# DTR# 4 9 RI# GND 5 Gigabit LAN (RJ-45) connector (LAN) Speed Speed Status Description Note: This port allows Gigabit connection to a Local OFF Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED Green indications.
Quick Reference Guide 2.2 Installing Hard Disk & Memory Step1. Unfasten 4 screws to remove the back cover.
SEPC-KA Step2. Memory Installation: Insert the SODIMM into the memory socket. Step3. HDD Installation: Insert the HDD and fasten 2 screws. Step4. Assemble the back cover back as step 3 to step 1.
