Installation Sheet

SUGGESTED TOOLS AND MATERIALS

Sealant Tape Measure

10'

VANITY TOP INSTALLATION

Apply bead of quality sealant evenly

along the top of the vanity.

Finally, place the bottom side of back splash with sealant onto the countertop and

check alignment of backsplash. Adjust the leg levelers as needed

Apply silicone sealant evenly along the

bottom and backside of backplash.

EUTxx-RS /

QUTxx-RS / SUTxx-RS

**NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only. **