User's Manual

Messages 39
SMS Archive
This menu allows you to consult all read
messages you saved and to
Delete all
archived messages at once. You save a
message by activating the
Auto save SMS option (see
above), or by selecting a received message, pressing
, twice and selecting Move to Archive .
If not included in your phone subscription, you must
subscribe to an e-mail account and have received the
settings information from your provider. In this case,
all parameters are communicated to you by your
provider and/or operator as described below and must
be entered as given. In some cases, your operator might
also be your e-mail service provider.
This menu allows you to send and
receive e-mails, with or without
attachements. If your
phone was pre-
configured, the parameters are already
set and you don’t have to change them, except for
Login , Password and E-mail address which are up to you
when creating an e-mail account.
To enter specific signs such as @ or %, see page 13.
Settings
Press , , select Messages > E-mail > E-mail 1 and
press
, . Then select Settings and press , to
access the following options:
Auto save
SMS
Allows you to set On or Off this option,
which will automatically save messages
sent in the
Archive menu.
E-Mail
SMS Archive
E-mail
Account
name
To rename E-mail 1 and E-mail 2 boxes.
An e-mail account might be predefined
and locked, preventing renaming.
E-mail
server
To configure the settings needed to
connect to the e-mail server of your
Internet Service Provider (ISP).
In some cases,
Login , Password and
E-mail address are up to you when you
subscribe to your account. Enter them
as defined. The
POP3 address is used to
receive e-mails, whereas the
SMTP
address
is used to send e-mails.
WARNING! For an e-mail connection via GPRS, if your
phone operator is NOT your e-mail provider, contact them
to get the correct address of the SMTP server.
Philips755_GB_4311 255 58341.book Page 39 Mardi, 11. mai 2004 11:02 11