User's Manual

9
@
9
w
_
EN
.
book Page
10
Friday
,
June
22
,
2007
5:22
PM
Speed dial via call logs
In idle mode, press ( to access Call Logs. Select a
number you wish to call and press ( to dial the number.
The default setting of Speed Dial is Off. To
activate this function, you need to activate it in the
phone settings menu
.
Make an emergency call
You can make an emergency call anytime,
irrespective of whether the mobile phone has been
registered on the network.
1. In idle mode, enter the emergency call number
(specific number in the caller's country)
2. Press (.
Note that an emergency call will not be stored in
the call record.
3. Alternatively, after switching on the mobile
phone and entering the PIN number, press R
SOS to go to the emergency call screen. If there
is no SIM card, pressing R SOS can also bring
you to the emergency call screen, displaying the
call number. Then press ( or the OK softkey to
directly make an emergency call and the dial
animation will be displayed.
Calling
Handle multiple calls (Network
Dependent)
You can handle two or more calls at the same time,
as well as make conference calls with your phone.
The availability of this feature is dependent on your
network operator and/or your subscription.
Make a second call
You can make a second call when there is an active
call or with a call on hold. While on the phone, dial
the number (or select a contact from the phonebook)
and press (. The first call is put on hold and the
second number is dialled. You can then press L to
access the following options:
• Swap to toggle between 2 calls.
• Conference to introduce the caller into a
conference call.
• Transfer to connect the two calls. You are
disconnected when the transfer is completed.
• End Single to disconnect one party from the call.
• Phone book to access the contact list
• Message Center to send and receive messages.
• Sound Recorder to record the phone conversation
• Mute to deactivate the microphone
• DTMF to activate the touch tone dialing system
10