Use and Care Manual
USER GUIDE & SAFETY MANUAL
• Always use approved safety gear and equipment
• Use only properly maintained tool and equipment designed for this
product
• Only use blades or wheels designed for the material application
• Match speed, diameter and arbor size of tool and blade/wheel
• Do not exceed maximum RPM
• Keep guards in place while operating tool/equipment
• Make sure blade/wheel is not touching anything when the tool is started
• Keep all parts of body away from moving parts
• Always let the blade/wheel come to a complete stop before setting the
tool down
• Do not operate in combustible environments; sparks could cause a fire or
explosion
• Do not apply side pressure to the blade/wheel, such as side grinding,
twisting, or wedging in a cut.
• Do not touch or stop a moving blade/wheel with your hand.
• Do not touch a dry cutting blade/wheel immediately after use, it may be
hot.
• Read and understand tool & equipment instructions and warnings prior
to use.