Door Reversal Instructions

DoorReversalInstructionforModel
1)Remove(4)Phillipsheadscrewsfromtheplastictopoftheunit.
thenLiftandremovethetopcover.
2)LiftandRemoveTopHingeandupperdoorandsetitaside.
3)Removemiddlehingeandlowerdoor.
4)Laydowntheunitandswapthedoorhingetotheothersidemaking
suretheshaftpivotismovedtotheotherside,thenreplacelowerdoor.
5)Removeplasticplugatthemiddletobeabletomovethecenter
hingetotheoppositeside,thenreplaceupperdoor.
6)Atthetopyoumustinstallthehingetotheoppositesidemakingsure
thepivotpinisalsorelocatedtotheotherside
7)Youmusttightallthescrewsfirmlyandadjustthedoorthenreplace
theplastictopcover
Note:Makesuretowait12hoursbeforestartingtheunit