Instruction manual

16
SOAK, WASH, RINSE AND SPIN
 Press down the power button.
 Press the Function button until the SOAK, WASH, RINSE AND SPIN indicators are ON.
 Press the water temp button to select the water temperature.
 Press the water level button to select the appropriate water level setting.
 Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
WASH, RINSE AND SPIN
 Press down the power button.
 Press the Function button until the WASH, RINSE AND SPIN indicators are ON.
 Press the water temp button to select the water temperature.
 Press the water level button to select the appropriate water level setting.
 Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
SPIN ONLY
 Press down the power button.
 Press the Function button to select the SPIN function until only SPIN indicator is ON.
 Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
To select one of the pre-programmed automatic wash cycles follow the instructions as shown
on the following pages:
 Press the power button.
 Press the program button to select the appropriate program until the indicator light is ON.
(NORMAL is the default program)
 Press the water temp button to select the water temperature. (The default setting is cold water).
 Press the water level button to select the appropriate water level setting.
 Press the START/PAUSE to start the course. And the LED display will show the remaining time of
the entire course.
Close the lid, or the washing machine will buzz during wash and spin cycle.
In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the
washing machine to automatically refill with water to adjust the imbalance.