Specifications

PN SJ-IM-8AC
xi
Introduction
Certification
Beckman Coulter Avanti J-E centrifuges are manufactured in a facility that maintains certifications
to both ISO 9001:2008 and ISO 13485:2003. They have been designed and tested to be compliant
(when used with Beckman Coulter rotors) with the laboratory equipment requirements of
applicable regulatory agencies. Declarations of conformity and certificates of compliance are
available at www.beckmancoulter.com.
Scope of Manual
This manual is designed to familiarize you with the Avant J-E centrifuge, its functions,
specifications, operation, and routine care and maintenance. Beckman Coulter recommends that
you read this entire manual, especially the Safety Notice and all safety-related information, before
operating the instrument or performing instrument maintenance.
• CHAPTER 1, Description contains system specifications and a brief physical and functional
description of the centrifuge, including the operating controls and indicators, and available
rotors.
• CHAPTER 2, Operation contains centrifuge operating procedures.
• CHAPTER 3, Troubleshooting lists diagnostic messages and other possible malfunctions,
together with probable causes and suggested corrective actions.
• CHAPTER 4, Care and Maintenance contains procedures for routine operator care and
maintenance, as well as a brief list of supplies and replacement parts.
• APPENDIX A, Preinstallation Requirements provides information about space and power
requirements for installing and connecting the centrifuge.
NOTE
If the centrifuge is used in a manner other than specified in this manual, the safety and performance
of this equipment could be impaired. Further, the use of any equipment other than that recommended
by Beckman Coulter has not been evaluated for safety. Use of any equipment not specifically
recommended in this manual is the sole responsibility of the user.