Specifications

PN SJ-IM-8AC
2-5
Operation
Manual Operation
2
Manual Operation
When a run-parameter key (ROTOR, RPM/RCF, TIME, TEMP, ACCEL, or DECEL) is pressed, a parameter
can be entered or changed. Entry is completed when
ENTER or another function key is pressed.
1 To change an entry before you’ve pressed ENTER or another parameter key, press CE and enter
a different value.
a. To change an entry after you’ve pressed
ENTER, press the run-parameter key again.
If an unacceptable value is entered, the valid range for that parameter is displayed in the
message line.
b. Enter the correct value.
Selecting a Rotor
1 Press ROTOR
A list of rotors, with rotor entry codes, scrolls across the display.
2 Use the keypad to select a rotor by entry code number.
a. An alternate method of selecting a rotor is to press
ROTOR repeatedly.
The rotor number changes each time the key is pressed.
b. When the rotor you are using is displayed, press
ENTER.
3 Press the next run-parameter key or press ENTER.
Entering Run Speed
Enter a run speed up to the maximum speed of the rotor in use (21,000 RPM maximum). Or, enter a
relative centrifugal field (RCF) value up to the maximum achievable RCF of the rotor.
1 Press RPM/RCF once to enter speed in RPM or twice to enter speed in RCF.
Allowed speed for the selected rotor is displayed.
2 Use the keypad to enter required speed.
Entered speed appears on the speed display.