Specifications

PN SJ-IM-8AC
2-11
Operation
Programmed Operation
2
Changing a Program
1 Press PROGRAM.
Previously saved program numbers are displayed.
2 Select the appropriate keypad number and press ENTER.
The message “
Press ENTER START to run, or edit parameters” is displayed.
3 Press SHOW SET to display program parameters.
4 Press the run parameter key to be changed.
Parameter prompts are displayed.
5 Use the keypad to enter the new value.
6 Repeat steps 4 and 5 to change other run parameters.
a. When all changes have been entered, press
SAVE.
The revised program will remain in memory until further changes are made and saved.
b. Record the changes on your Program Library record (233679).
7 Press ENTER and START to begin the programmed run (or press PROGRAM to exit program mode
and return to manual operation).
The run starts.