Technical information

Centrifuge Standard Operating Procedure 8
When running biological samples (not pathogens or toxic substances, as stated
above), use sealed or capped tubes to minimize aerosol generation.
In the event of a power failure, contact the Instrumentation Technician for
assistance to retrieve samples from the ultracentrifuge.
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
Figure 2-1: Methods for balancing a rotor. In this example, if three tubes
are placed in the rotor they must all be the same weight.
3. PERSONAL PROTECTIVE EQUIPMENT
Material to be centrifuged may contain potentially infectious or
hazardous material, so standard laboratory protective
equipment must be worn (latex or nitrile gloves, approved
safety glasses, lab coat). Closed-toe and heel footwear
constructed of resistant material is also required for laboratory
activities.
See the WLU Laboratory Health and Safety Manual for additional
information on personal protective equipment:
http://www.wlu.ca/documents/23120/Laboratory_Health_%26_
Safety_Manual__Feb_2007_Final.pdf.