User manual

MFP Laser
- 28 -
6 - Network features
3 Select SETUP WIZARD using the keys  or 
and confirm with OK.
The machine searches for existing networks.
4 Select NEW NETWORK using the keys  or 
and confirm with OK.
5 SSID appears on the screen, enter the name of
your network using the numerical keypad, pressing
the keys one after the other until you obtain the
name you want (32 characters maximum) and
confirm with OK.
6 AD-HOC MODE or INFRA. MODE appearson the
screen. Select AD-HOC MODE and confirm
with OK.
7 7 The sub-menu CHANNEL appears, enter a
figure between 1 and 11 and confirm with OK.
8 Select your encryption method, OFF or WEP and
confirm with OK:
- If you choose WEP, enter the WEP key that you
are using on your network.
9 9 IP CONF.: MANU or IP CONF.: AUTO appear on
the screen.
If you choose to set up the system manually, go to
the next paragraph and enter the parameters
IP ADDRESS, SUBNET MASK and GATEWAY.
10 When you press OK, the machine reboots to take
into account the new WLAN parameters.
Once the network has been set up, the LED of the WLAN
USB key should be on.
Referring to or changing your
network parameters
Each of the parameters of your network may be changed
as your network develops.
 2822 - SETUP / WLAN / PARAMETERS / IP
ADDRESS
1 Type in , select the menu SETUP using the keys
 or  and confirm with OK.
2 Select WLAN using the keys  or  and confirm
with OK.
3 Select PARAMETERS using the keys  or  and
confirm with OK.
4 Select IP ADDRESS using the keys  or  and
confirm with OK.
5 The number of your IP address will appear in the
format 000.000.000.000. Enter the new IP address
for your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
key .
 2823 - SETUP / WLAN / PARAMETERS / SUBNET
MASK
1 Type in , select the menu SETUP using the keys
 or  and confirm with OK.
2 Select WLAN using the keys  or  and confirm
with OK.
3 Select PARAMETERS using the keys  or  and
confirm with OK.
4 Select SUBNET MASK using the keys  or  and
confirm with OK.
5 The number of your subnet mask will appear in the
format 000.000.000.000. Enter the new submask
of your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
key .
 2824 - SETUP / WLAN / PARAMETERS / GATEWAY
1 Type in , select the menu SETUP using the keys
 or  and confirm with OK.
2 Select WLAN using the keys  or  and confirm
with OK.
3 Select PARAMETERS using the keys  or  and
confirm with OK.
4 Select GATEWAY using the keys  or  and
confirm with OK.
5 The number of your gateway will appear in the
format 000.000.000.000. Enter the new gateway
for your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
key .
 2825 - SETUP /WLAN / PARAMETERS / SSID
1 Type in , select the menu SETUP using the keys
 or  and confirm with OK.
2 Select WLAN using the keys  or  and confirm
with OK.
3 Select PARAMETERS using the keys  or  and
confirm with OK.
4 Select SSID using the keys  or  and confirm
with OK.
5 The name of your network will appear on the
screen. Enter the new name of your network and
confirm with OK.
6 Exit this menu by pressing the
key .
 2826 - SETUP / WLAN / PARAMETERS / MODE
1 Type in , select the menu SETUP using the keys
 or  and confirm with OK.
2 Select WLAN using the keys  or  and confirm
with OK.
Important
Please note that in ad-hoc mode,
the WPA/WPA2 encryption method
is not available.
Note
The WEP key number may be
configured in the menu:  29 - SETUP /
TECHNICALS / WEP KEYS NBR.