User manual

MFP Laser
- 37 -
8 - PC Features
11 Select the destination folder for installation and
click on the N
EXT button.
12 The final installation is ready to be executed. Click
on the I
NSTALL button.
13 A screen informs you of the installation progress.
14 Click on OK to finish the installation.
The Companion Suite Pro software is now installed on
your PC.
You can now connect your multifunction machine.
To connect the multifunction machine to the PC via USB,
refer to paragraph Adding a device connected via USB,
page 39.
To connect the multifunction machine to the PC via the
local network, refer to paragraph Adding a device
connected to the network, page 40.
Use the good printer driver according to your connection.
Installing the drivers manually
You can install the printer and scan drivers manually
without running any setup software.
1 Locate your USB cable connectors and connect as
shown below on the picture.
2 Power on your multifunction machine.
The PC detects the device.
3 Click on L
OCATE AND INSTALL DRIVER SOFTWARE
(
RECOMMENDED ).
Printer and scanner driver name Connection
Laser Pro LL2 USB
Laser Pro LL2 network WLAN
Note
This installation mode is only possible
on Windows 2000, XP and Vista.