User manual
MFP Laser
- 40 -
8 - PC Features
2 Power on your multifunction machine.
The PC detects the device and the drivers are
automatically installed.
3 Once the installation is finished, a message
indicates that the drivers are installed correctly.
You can now use the multifunction machine to print or
scan your documents.
Adding a device connected to the network
You may connect your multifunction terminal to a wireless
network (option)..
1 Run the Companion Monitor application by clicking
on the icon located on your desktop or from the
menu S
TART
> A
LL
P
ROGRAMS
> C
OMPANION
SUITE
> C
OMPANION
SUITE
PRO
LL2 > C
OMPANION
-
M
ONITOR
.
2 Click the plus sign or A
DD
button.
3 The list of devices detected on the network
appears. Click on R
EFRESH
to update the list.
4 Select your multifunction machine and click OK.
5 For Windows Vista only, select the desired print
language for your printer and click on N
EXT
.
6 The next window lists the different features of the
printer that are about to be installed. Click on the
N
EXT
button.
7 The window indicating that the installation
procedure was successful pops up. Click on the
F
INISH
button.
8 Enter a registration name for your PC and click OK.
The multifunction machine will use this name to
identify your PC.
Important
The Companion Suite Pro software
shall be installed to perform this
operation.
Note
Detected devices appear with the
following information:
NetBIOS name (hardware identifier) or
IP address (device’s identifier on the
network).
Network name (user-defined). To
define the name of a device on the
local network, refer to paragraph
Network features, page 26.
Important
Only devices found on the same
local subnetwork as the PC are
automatically detected and
displayed. To add a device located
on another subnetwork, refer to
paragraph Adding manually a
device connected to the network,
page 41.