User manual

MFP Laser
- 43 -
8 - PC Features
1 Click on the S CAN T O graphical image or press the
SCAN button on your machine.
When you press the SCAN button on your
machine, you have then to select either : SCAN
TO-PC USB or the registered name of your PC.
SCAN-TO-PC USB : to be selected when you want
to do ScanTo through the USB cable. Please
ensure that the connexion in your Monitor is set on
USB.
"PC registered name" : to be selected when you
want to do ScanTo through the network
connection. Please ensure that the connection in
your Monitor is set on WLAN.
2 You can follow the ongoing digitisation on a screen.
3 At the end of the digitisation, the scanned picture
appears in the PaperPort window.
To scan a document from PaperPort:
1 Click on F
ILE > S CAN .
2 Select the desired scanner.
3 Customise the advanced properties of the
digitisation by clicking on the A
DJUST THE QUALITY
OF THE SCANNED PICTURE link.
4 Adjust the desired parameters and click on the OK
button.
5 Click on the S
CAN button, you can follow the
ongoing digitisation on a screen.
Printing
You have the possibility to print your documents via the
USB connection or the WLAN connection.
During the installation of the Companion Suite Pro
software, the L
ASER P RO LL2 printer driver will be
installed automatically onto your PC.
Printing on the multifunction machine
Printing a document on the multifunction machine from
your PC is like printing a document in Windows.
1 Use the P
RINT command from the F ILE menu of the
currently open application on the screen.
2 Select the L
ASER P RO LL2 printer.
Note
The "PC registered name" is the name
of the PC you have set up at , point5 in
§Adding a device connected to the
network .
Note
If the PaperPort software is not
installed on your hard drive, the
scanned picture will appear on your
desktop in TIFF format.