User`s manual

51
STOP
!
Installation Manual
2.2 Wire positioning measurements
Fig. 6
Minimum shaft clearance dimen-
sions required for the service lift to
run, and distance between the
guide wires.
Dimensions:
1) Standard wire guide/narrow wire guide (details page 46).
Holes in the base platform in the tower for wire
bushing are positioned as outlined below.
The holes are positioned with a tolerance of
+/-5 mm. Holes with diameter Ø200 mm are fitted
with rubber edging.
DANGER!
Ensure that lift evacuation to the tower
ladder is possible.
Warning!
Ensure that no obstacles are in the way
of the service lift.
Shark A
B
1)
C D E S
M 250 395/330 600 600 220 50
L 250 575/510 960 600 220 50
XL 350 575/510 960 800 320 50