BUILT-IN WINE CHILLER / VINERA PARA EMPOTRAR INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model Number / No. de Modelo: WC1500DSS BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. La sección en español empieza en la página 15. Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. Avanti Products, A Division of The Mackle Co., Inc. P.O. Box 520604 - Miami, Florida 33152 www.
TABLE OF CONTENTS Appliance Safety 3 Important Safeguides 4 Help Us Help You … 5 Parts and Features 6 Important Safety Instructions 7 Installation Instructions 7 Before Using Your Wine Chiller 7 Installation of Your Wine Chiller 7 Electrical Connection 8 Extension Cord 8 Reversing the Door Swing of Your Wine Appliance 8 Installing Stainless Steel Handle 8 Operating Your Wine Chiller 9 ON/OFF Power 10 Setting the Temperature Control 10 Storage 10 Interior Light 10 Door Lock
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: • • • • • • • • • • • • • • • • • • Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Replace all panels before operating.
HELP US HELP YOU... Read this guide carefully. Write down the model and serial numbers. It is intended to help you operate and maintain your new Wine Chiller properly. You'll find them on a plate located on the rear outside wall of the Wine Chiller. Keep it handy to answer your questions.
PARTS & FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9.
IMPORTANT SAFETY INSTRUCTIONS aWARNINGa • • • • • • To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read all instructions before using the Wine Chiller. DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”. Before you throw away your old Wine Chiller: Take off the door.
¾ ELECTRICAL CONNECTION aWarninga Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
frame. Follow the sequence shown below in Illustration # 2. 4. Align the handle with the screws installed in the above step # 3. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. (DO NOT overtighten as this will cause damage to the handle assembly). 5. Replace the door gasket to its original position.
¾ ON/OFF POWER To turn OFF the appliance, touch the ¾ • • • • • • mark. SETTING THE TEMPERATURE CONTROL You can set the temperature as you desire by touching the UP or DOWN mark. When you touch the two marks for the first time, the LED readout will show the original temperature set at previous time (the temperature preset at the factory is 12ºC/54ºF).
• • For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail compartment, however this unit was designed with a plastic post on each sides of the shelf track to prevent bottles from falling. When removing the shelf out of the inner rail, make sure to remove all items first. Then move the shelf to the position where the notch of shelf is exactly under the plastic post and lift the shelf. In order to replace the shelf, repeat steps described above in reverse.
PROBLEMS WITH YOUR WINE CHILLER? You can solve many common Wine Chiller problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM Wine Chiller does not operate. Wine Chiller is not cold enough. Turns on and off frequently. The light does not work. Vibrations. The Wine Chiller seems to make too much noise. The door will not close properly. POSSIBLE CAUSE Not plugged in.
SERVICE FOR YOUR WINE CHILLER We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can have the confidence that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you. Just call us toll-free.
YOUR Avanti Products WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. WHAT IS COVERED LIMITED ONE-YEAR WARRANTY LIMITED SECOND THROUGH FIFTH YEAR WARRANTY For one year from the date of purchase by the original owner, Avanti Products will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use.
INSTRUCCIONES DE SEGURIDAD ATENCION INSTRUCCIONES PARA LA CONEXION A TIERRA Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la conexión a tierra reduce el riesgo de choque eléctrico proporcionando un cable a tierra con una enchufe de conexión a tierra. Este enchufe debe estar conectado en un tomacorriente instalado correctamente y conectado a tierra.
Temperaturas recomendadas para enfriar vinos: Vinos tintos Vinos blanco/seco Vinos rosé/Zinfandel Vinos blanco/espumante 15º - 18º C 9º - 14º C 10º - 11º C 5º - 8º C 58 – 65º F 48 – 57º F 49 – 51º F 40 – 47º F Operación Oprima los botones marcado “ “y“ “ localizados en el panel de controles para programar la temperatura. Al presionar los botones marcados “ “o“ “ por primera vez, el indicador en la pantalla mostrará la temperatura programada de fábrica o la más reciente.
NOTA: Para remover las repisas corredizas, vacíe las repisas antes de sacarlas. Hálelas aproximadamente un tercio hacia afuera hasta que la marca en el raíl se alinee con el poste plástico en ambos lados. Levante cada repisa y sáquela suavemente de la unidad. Para reemplazar de nuevo la repisa, repita los pasos anteriores en dirección opuesta.
REGISTRATION INFORMATION Thank you for purchasing this fine Avanti products. Please fill out this form and return it within 100 days of purchase and receive these important benefits to the following address: Avanti Products, A Division of The Mackle Co., Inc. P.O.
PRINTED IN CHINA 20
