User Manual

Restore to default settings

You may nd it necessary to reset the 10BS if it is not working as expected. After it is reset to factory

default settings, all the paired mobile phone information will be erased.

1. Set 10BS to PAIRING MODE - From o status, press and hold the MFB button for 7 seconds until LED

indicator ashes BLUE and RED alternately.

2. Double click the MFB button - you will see LED ashes BLUE and RED together very quickly about 2

times and then 10BS will turn o automatically.

Note: For successful connection, please also delete the paired information from your phone and re-pair

with 10BS.

How to charge

When the LED ashes RED every 6 seconds, you should fully recharge the device for about 3 hours. The

LED will remain RED while charging and then turn o when charging is complete.

You can plug the 10BS into a USB wall charger/car charger (DC 5V / 0.5-1A) or computer USB port that is

powered on.

Hold for 7S

ashes BLUE and RED

Double Click

Auto Power On

DC 5V / 0.5-2A