User Manual

Troubleshooting

1. 10BS won’t auto power on when I enter the car?

Please make sure you DID NOT MANUALLY POWER OFF THE CAR KIT. Doing so will disable the “auto

power on” function. Details please refer to “Auto Power On/O” function chapter.

2. 10BS continuously beeps while driving?

The 10BS comes with motion sensor. It will auto power on when it detects any motion (e.g. opening

the car door). Once it powers on, it will BEEP and try to auto-reconnect with the last paired mobile

phone. If not successful, it will auto power o after 10 minutes and BEEP again. Please make sure

your phone’s Bluetooth is activated, or you may need to disable the Auto Power On function (refer

to “Auto Power On/O” function chapter).

3. 10BS can't pair and connect with 2 devices at the same time?

If 10BS fails to connect two phones, please conrm the multipoint function is on. While in standby

mode, press and hold the "V-" / "V+"buttons for 3s until you hear a beep to turn on/o the Multipoint

function.