User Manual

To add another phone (Multipoint function)

1. Connect the rst phone (instructions above).

2. Set CK11 to PAIRING MODE (refer to Chapter 5) to pair and connect the 2nd phone.

3. Reboot the CK11 by turning it o and then on again. Now both phones will be connected to the

CK11 or you may need to manually click “Avantree CK11” on your phone to connect.

Reconnection

Normally, the CK11 will automatically reconnect the last paired device once it powers on. For other

devices, you may need to manually click "Avantree CK11" on your phone to reconnect.

Note: To ensure the successful auto re-connection with 2 devices (including the last paired device),

please activate Bluetooth on both phones before opening the car door.

Restore to default settings

You may nd it necessary to reset the CK11 if it is not working as expected. After reset to factory default

settings, all the paired mobile phone history will be erased.

1. Set CK11 to PAIRING MODE - press and hold the for 3 seconds until the LED ashes BLUE and

RED alternately.

2. Double click the mute button - you will hear 2 beeps indicating a successful reset. Then it will

auto matically enter pairing mode.

Note: For successful connection, please also delete the pairing history on your phone and re-pair with

CK11.

Avantree CK11

Bluetooth

PAIR /

RECONNECT

MUTE