User Manual

ManualsBrandsAvantree ManualsHeadphonesAlto Clair

Stereo Wireless Headset

BTHS-AH6

User Manual

Product Overview

Basic operation

Status of LED indicators

Connect to a Bluetooth mobile device

Connect to two Bluetooth mobile devices simultaneously

Reconnect to Bluetooth device

Connect to PC / Laptop

Qualcomm® aptX™HD

Qualcomm® aptX™ Low Latency

Use as a wired headphone

Charging

Clear pairing history

Troubleshooting

············································································································

················································································

·································································································

········································································································

···············································································································

··························································································

··············································································

····································································································

··················································································································

·································································································································

································································································

····················

································································

Summary of content (9 pages)

PAGE 1
User Manual Stereo Wireless Headset BTHS-AH6 Product Overview ············································································································ 1 Basic operation ·················································································································· 2 Status of LED indicators ································································································ 3 Connect to a Bluetooth mobile device ············································
PAGE 2
Product Overview 1
PAGE 3
Basic Operations Button Function Operations Power ON Slide the power switch towards middle “Welcome to Avantree” Pairing Slide the power switch to left and hold for 3 seconds. You’ll hear “Pairing” and the LED indicator blinks RED and BLUE alternately.
PAGE 4
Status of LED indicators Working Status LED indicator Paring Mode Blinks BLUE & RED alternately Reconnecting Blinks BLUE once every 1 second Disconnected Blinks BLUE once every 10 seconds Microphone Mute ON Remains WHITE Connected with SBC Codec Blinks BLUE once every 5 seconds Connected with Fast Stream Codec Remains BLUE Connected with AptX Codec Blinks WHITE once every 5 seconds Connected with AptX-LL Codec Remains WHITE Connected with AptX-HD Codec Blinks WHITE twice every 5 seconds
PAGE 5
Pair to mobile device • • • Set the headphones into Pairing Mode as above. Activate Bluetooth on your phone and set it to search for new devices. Select “Avantree AH6”,once successfully paired you’ll hear “connected”. 4:30 Settings 4G Bluetooth 4:30 Settings 4G Bluetooth Bluetooth Bluetooth Now discoverable as “iPhone(2)” Now discoverable as “iPhone(2)” MY DEVICES MY DEVICES Avantree HS134 Not Connected Bose Bluetooth Audio...
PAGE 6
Reconnect to Bluetooth device Normally, when the next time you turn on Avantree AH6, it will automatically reconnect the last paired device. Alternatively, Slide the power switch to left once then release to enter into its Reconnection Mode. Connect to PC / Laptop • • • Set the headphones into Pairing Mode as above. Activate Bluetooth function on your PC/Laptop, search & select “Avantree AH6” to pair and connect.
PAGE 7
• For Skype call, please set “Avantree AH6 Hands-free Headset” as microphone and speaker device in Audio Settings .
PAGE 8
Charging When the LED flashes RED 3 times per 10 seconds or you hear the voice prompts “Low battery please turn off and charge”, you should fully recharge the device for about 1 hour. The headset can be charged with the desktop charging stand (DC5V/0.5-1A) or with the micro USB cable (DC5V/0.5-1A). • Charged with the desktop charging stand – The LED indicator on the charging stand will remain WHITE while charging and turnto GREEN when charging is complete.
PAGE 9
Clear pairing history If you have issues with the audio stream skipping or cutting out when using Avantree AH6, please try to clear pairing history as following: Firstly, turn on the headset (Non-calling Status), then Tap and Hold BOTH & 5 seconds till the LED blinks PINK for 2 seconds, then the headphones enter into PAIRING MODE automatically. Troubleshooting No sound with PC? • Set Avantree Alto Clair as the default device or output device on the PC.