User Manual Stereo Wireless Headset BTHS-AH6
EN Product Overview AUX E UT M 1
Basic Operations & LED indicators Button Function Power ON Power Switch Volume Wheel Pairing Operations Slide the power switch towards middle you’ll hear “Welcome to Avantree” Slide the power switch to left and hold for 3 seconds. You’ll hear “Pairing” and the LED indicator blinks RED and BLUE alternately.
• • aptX-LL supported devices: Avantree Oasis, Avantree Audikast etc. aptX-HD supported device: Avantree Oasis Plus For full list of suppprted devices please visit www.aptx.com Connect & Pair Enter Headphones into Pairing Mode: Slide the power switch to left RED and BLUE alternately. and hold for 3 seconds. You’ll hear “Pairing” and the LED indicator blinks Pair to mobile device • • • Set the headphones into Pairing Mode as above. Activate Bluetooth on your phone and set it to search for new devices.
When the LED flashes RED 3 times per 10 seconds or you hear the voice prompts “Low battery please turn off and charge”, you should fully recharge the device for about 1 hour. The headset can be charged with the desktop charging stand (DC5V/0.5-1A) or with the micro USB cable (DC5V/0.5-1A). • Charged with the desktop charging stand – The LED indicator on the charging stand will remain WHITE while • charging and turn to GREEN when charging is complete.
CE: The product is in conformity with the essential requirements of Article 3.1 (a) (b), 3.2 of Directive 1999/5/EC and the essential requirements of Directive 2004/108/EC.This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DE Verbinden und paaren Gehen Sie in den Avantree AH6 Paarungsmodus: Schieben Sie den An-/Ausschalter im AUSGESCHALTETEN Zustand Richtung LED-Anzeige abwechselnd ROT und BLAU aufleuchtet. , bis Sie „Paarung“ hören und die Mit einem mobilen Gerät paaren • Setzen Sie die Kopfhörer wie oben beschrieben in den Paarungsmodus. • Aktivieren Sie Bluetooth auf Ihrem Handy und suchen Sie nach neuen Geräten. • Wählen Sie „Avantree AH6“ aus. Sobald die Paarung besteht, hören Sie „verbunden“.
FR Connection et appairage Mettre l’Avantree AH6 en appairage: Casque éteint, glissez et maintenez l'interrupteur d'alimentation vers avec l'indicateur LED clignotantalternativementen ROUGE et BLEU. , jusqu'à ce que vous entendiez “pairing” Appairage à un téléphone mobile • Mette en appairage votre casque comme ci-dessus.. • Activez le Bluetooth sur votre téléphone et recherchez les nouveaux appareils. • Sélectionnez “Avantree AH6”. Une fois associé, vous entendre “connected”.
IT Connessione e accoppiamento Portare Avantree AH6 in modalità accoppiamento: Da spento, portare il pulsante dell’accensione verso e tenerlo premuto fino a quando non si sente il comando vocale “accoppiamento” e l’indicatore LED non lampeggia in ROSSO e BLU in modo alternato Accoppiamento con un dispositivo mobile • Portare le cuffie in Modalità Accoppiamento come descritto sopra. • Attivare il Bluetooth sul proprio telefono e ricercare nuovi dispositivi. • Selezionare “Avantree AH6”.
ES Conectary emparejar Entrar en Modo de EmparejamientoAvantree AH6: Con el dispositivo apagado, deslizar y mantener el interruptor en dirección a y el indicador LED alterne luz ROJA y AZUL. , hasta que escuche “emparejando” Emparejar al dispositivo móvil • Entrar en modo de sincronización de auriculares como arriba. • Activar el Bluetooth en el teléfono y programar para que busque nuevos dispositivos. • Seleccionar "Avantree AH6". Una vez emparejado con éxito, escuchará "conectado".
