Users Manual

WIRELESS TV
HEADPHONE SET
Model No.: #5)4"4
User Manual
Bedienungsanleitung
Mode d’emploi
Manuale di Istruzioni
Manual de Usuario
EN
DE
FR
I T
ES
Support.avantree.com
Scan for FAQ
READ FIRST!
Product Overview & Basic Operation
English
User Guide
Turn on & connect the transmitter and headphone
1. Powering up transmitter
Connect the transmitter to a power source. The power source can be either
a TV USB port (TV must be ON to provide power) or any 5V/500mA-2A rated
USB charger.
2. Turn on the transmitter and the headphone
Turn on the transmitter - Slide the power switch to ON, the LED indicator will
light up
BLUE
Turn on the headphone–Slide the power switch on the headphone to ON.
RED and BLUE alternately.
Now, keep the transmitter and headphone close and wait for connection.
Once connected, LED on both the devices will turn
SOLID BLUE.
the charging dock. For next use, simply take the headphone out of the charging
dock, it’ll automatically reconnect to the transmitter.
Connect transmitter to your TV/audio source
Check your audio source output options before connecting
Fig1-1
If your TV has Digital Optical Out
Please use the Optical cable to connect the transmitter to TV.
Ensure your TV’s Sound Out/Speaker setting is set to “External Speaker” or
“Optical audio out”, e.g.: Samsung > Audio Out/Optical; LG > Optical Out.
Various on other TV brands.
Ensure your TV’s Audio Format/Digital Sound Out setting is set to “PCM” or set
the Dolby/DTS Digital setting to “OFF”.
Now you can stream audio from your TV.
Note:
If you don’t know how to change the settings on your TV, or if you cannot hear
anything through the headphone after changing the settings, please contact
your TV manufacturer for support.
Unplug any device from the 3.5mm AUX jack while using the OPTICAL out. (If
anything is plugged into the AUX jack, the transmitter will prioritize the AUX
signal).
If your TV has Headphone (3.5mm) Out
Please use the AUX cable to connect the transmitter to TV. Now you can stream
audio from your TV.
Note: If there is no sound playing from headphone, please set the Sound Out/
Speaker setting on your TV to “Wired headphones” or “Headset”.
If your TV has Red/White Audio Out (RCA- only for TV)
Please use AUX cable&3.5mm to RCA Audio adapter (both provided in the
package) to connect the transmitter to TV. Now you can stream audio from your
TV.
Note:
If there is no sound playing from headphone, plea
se set the Sound Out/
Speaker setting on your TV to “External Speaker”.
Ensure that you use the Red/White ports labeled “AUDIO OUT”, other Red/White
ports will NOT work.
If your Receiver has 6.35mm phone jack at front
Dutsch
Bedienungsanleitung
+ /-
Volume up/down Click + /-
Next/Previous track Hold + /-
Play/Pause Click
Answer/end a call Click
Reject a call Press and hold
Power on/
Slide to ON/OFF
Pairing
mode
Turn on headphone, and
switch to
position for 5 seconds
Pairing mode
Press and hold MFB button
for 5 seconds
Slide to ON/OFF
DC IN
OPTICAL IN
AUX IN
Charging pins
Bluetooth status indicator &
Headphone charging indicator
MIC
Einschalten & verbinden des Transmitters und der Kopfhörer
1. Einschalten des Transmitters
Verbinden Sie den Transmitter mit einer Stromquelle. Bei der Stromquelle kann es sich entweder
um einen TV USB-Anschluss (der Fernseher muss EINGESCHALTET sein, um Strom zu liefern) oder
ein 5V/500mA-2A USB-Ladegerät (z.B. Ihr Handy-Ladegerät) handeln.
2. Schalten Sie den Transmitter und die Kopfhörer ein
Schalten Sie den Transmitter ein–Schieben Sie den AN/AUS-Schalter auf AN, die LED-Anzeige
leuchtet 5 Sekunden lang
BLAU auf, dann blinkt die LED-Anzeige schnell BLAU auf.
Schalten Sie die Kopfhörer ein–Schieben Sie den Schalter auf EIN, die LED-Anzeige
blinkt nun abwechselnd
ROTund BLAU auf.
Halten Sie den Transmitter und die Kopfhörer nun dicht beieinander und warten Sie, bis eine
Verbindung besteht. Sobald die Verbindung besteht, leuchten die LED-Anzeigen auf dem
Transmitter und an den Kopfhörern DURCHGEHEND
BLAU auf.
Nach der Verwendung müssen Sie die Kopfhörer nicht ausschalten, legen Sie die Kopfhörer einfach
zurück in das Transmitter-Dock, um diese aufzuladen. Stellen Sie sicher, dass die LED-Anzeige an den
im Ladedock. Bei der nächsten Verwendung nehmen Sie die Kopfhörer einfach aus dem Ladedock
heraus, diese verbinden sich dann automatisch.
Fig1-2
Please do NOT use the RED/WHITE ports on the back of your AV receiver, they
may permanently damage the transmitter. Please ONLY use the BIG 6.35MM
PHONE OUT on front side of your AV Receiver with the 6.35mm to 3.5mm
adapter.
Plug any wired headphone into the converter plug, lower the volume on the
Receiver for safety precausions, and test to see if there is audio coming through
to your headphone. Lowering the volume beforehand is a safety measure to
prevent damaging your ears.
Tips & Troubleshooting
Fail to reconnect
Normally, the headphone automatically reconnects to the transmitter each time
switch on headphone to position for 2
seconds to manually activate reconnection.
If it still does not work, you need to manually pair the headphone to the
transmitter:
Enter the transmitter into PAIRING mode – Press and hold MFB button
for 5
seconds,
RED & BLUE.
Enter the headphone into PAIRING mode – Turn on headphone, hold the on/
switch to
RED
&
BLUE.
Keep them close to each other. once connected, the
LED indicator on both
devices will turn
SOLID BLUE.
Clear paired history
Headphone AS50 - After power on, press volume button + and - for 10 seconds,
LED lights light up
PINK for 2 seconds, now all paired history of the headphone
is cleared. Then it will automatically enter pairing mode.
Transmitter - Enter the transmitter into pairing mode, now DOUBLE click the
MFB button (
) to clear all paired history of the transmitter.
Bluetooth/Charging LED
AUX in
Micro USB charging port
Charging contact points
Headphone Charging
Option 1 – Using the transmitter dock for recharging after each use.
1 Hold BOTH sides of the headphones when placing
into charging dock.
2 Headphones should be placed angled back
slightly and NOT vertically to charge.
3 LED light on the transmitter dock lights up
RED
during charging, if not, it means the headphone is
not correctly placed into the charging dock. Once
charging is complete, the LED on transmitter dock
will turn solid
GREEN.
Option 2 - Using a phone charger (5V/500mA-2A output), PC USB port, TV USB
port or any other USB outlet using the included USB cable. Charging indicator
on headphone lights up
RED during charging and turn o once charging is
complete.
What’s in the box?
Headphone
– AS50
Micro USB
power cable
Optical audio
cable
AUX 3.5mm
audio cable
AUX 3.5mm to
RCA audio cable
Transmitter
charging dock
1 2 3 4 5 6